Harness Lap Belt Mounting
 

I searched but couldn't find a clear answer. For those that run a harness, how did you mount the driver's right side and passenger's left side lap belt? Also, did you drill a hole in the floor for the anti-sub mount?

I'm slowly prepping some modified seats, and planning to run a 5 or 6 point harness.

I'll let you know where I mount the anti-sub strap.

sorry if thats not much help, normally i think people find a way to mount it and loop it through the seat if reclining, or buy a fixed seat rated for a 5/6point strap.

YES! You will need to drill holes in the floor sheet metal Just use standard race harness mounting hardware. Personally, I add an unnecessarily oversized additional back plate between the sheet metal. I just drilled a hole in the center of a 4 inch square of 3/8 weld steel plate.

https://www.amazon.com/RaceQuip-7000...55237954&psc=1

https://www.schrothracing.com/doc-sh...-2_2019-04.pdf

https://www.sfifoundation.com/wp-con...2006-05-12.pdf