Forced induction

Elmo370z · 10-09-2022, 04:04 PM

Car survived, back to the drawing board before tearing the front end off again. Coolant temps were high. IAT’s were 10 degrees over amibent, oil temps were hot but manageable
. Car is wicked fast though. Coming into turn 7 I’m a little
Over 140 mps compared to NA being between 118-122

Elmo370z · 10-12-2022, 10:46 AM

So. This was my first time getting the car on Sebring. This was a good shakedown to see how the cardboard ducting was going to hold up vs not running on back in April. The duct tape and cardboard works, IAT’s were around 10-15 above amibent temperatures. Oil temps still get hot but not as quickly, so the oil cooler will have to be moved to side with its own ducting. Main issue is the coolant, temps were spiking within 1/2 lap, I had a warning once it reached 230 degrees. I’m going to put the car on jack stand again, bleed it out to get rid of all the coolant and replace it with 100% distilled water and water wetter, also removing the radiator shroud. Going to increase the hole in the front bumper. Nexen sport R tires are insanely good, I didn’t get a chance to push them that hard due to overheating, but coasting around the track the car managed to hit a 2:40 at one point in time. I’ve got some great data to go off and continue to keep trying things until I run out of options. Next test date is Nov 17 at the firm, and back to Sebring Dec 10 and Jan.

Elmo370z · 10-19-2022, 07:53 AM

Time to delete AC and remove the rad shroud

Elmo370z · 10-19-2022, 11:11 PM

Where it should of been in the first place.

Elmo370z · 10-29-2022, 12:59 AM

Waiting on new fuel line, oil cooler bracket to start to put the car back together. Private track at The Firm if anyone is interested.

Elmo370z · 11-09-2022, 12:33 AM

..

Elmo370z · 11-09-2022, 12:35 AM

,

Elmo370z · 11-09-2022, 12:37 AM

P

Elmo370z · 11-09-2022, 12:38 AM

Attempt number 2 to cool this itch down. Oil got moved to the drivers side, passenger intake filter gets in the way. Ac condenser removed. Bp kit didn’t make things easy getting the oil
Cooler bracket to fit inside the bumper.

2011 Nismo#91 · 11-09-2022, 06:52 AM

Kinda suprised that the coolant temps are still high, also you are still using the stock PS cooler? I got tired of the PS fluid exploding all over the engine bay.

Elmo370z · 11-09-2022, 09:11 AM

Quote:

Originally Posted by 2011 Nismo#91

Kinda suprised that the coolant temps are still high, also you are still using the stock PS cooler? I got tired of the PS fluid exploding all over the engine bay.

Yeah that one is throwing me for a loop. Maybe it being so thick the oem water pump can’t keep up and it causing some sort of cavitation. Yeah I’m still running the oem ps cooler. I just clean the mess up after each track day.

Elmo370z · 11-18-2022, 01:18 AM

Turned my fastest recorded lap on lap 14. For now overheating issues have been figured out.

Elmo370z · 11-20-2022, 11:23 PM

Elmo370z · 11-30-2022, 10:07 AM

Just re bled the brakes with fresh srf since I had to
Open the bottle. Car is ready for it’s second putting at Sebring. If this goes well I may make
A push for road atlanta global
Time
Attack in may.

10-09-2022, 04:04 PM	#46 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Car survived, back to the drawing board before tearing the front end off again. Coolant temps were high. IAT’s were 10 degrees over amibent, oil temps were hot but manageable . Car is wicked fast though. Coming into turn 7 I’m a little Over 140 mps compared to NA being between 118-122 Rusty, madwi, xxAGAVExx and 3 others like this.

10-12-2022, 10:46 AM	#47 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	So. This was my first time getting the car on Sebring. This was a good shakedown to see how the cardboard ducting was going to hold up vs not running on back in April. The duct tape and cardboard works, IAT’s were around 10-15 above amibent temperatures. Oil temps still get hot but not as quickly, so the oil cooler will have to be moved to side with its own ducting. Main issue is the coolant, temps were spiking within 1/2 lap, I had a warning once it reached 230 degrees. I’m going to put the car on jack stand again, bleed it out to get rid of all the coolant and replace it with 100% distilled water and water wetter, also removing the radiator shroud. Going to increase the hole in the front bumper. Nexen sport R tires are insanely good, I didn’t get a chance to push them that hard due to overheating, but coasting around the track the car managed to hit a 2:40 at one point in time. I’ve got some great data to go off and continue to keep trying things until I run out of options. Next test date is Nov 17 at the firm, and back to Sebring Dec 10 and Jan. Rusty, sx moneypit, DarkZ34 and 1 others like this.

10-29-2022, 12:59 AM	#50 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Waiting on new fuel line, oil cooler bracket to start to put the car back together. Private track at The Firm if anyone is interested. redondoaveb likes this.

11-09-2022, 12:38 AM	#54 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Attempt number 2 to cool this itch down. Oil got moved to the drivers side, passenger intake filter gets in the way. Ac condenser removed. Bp kit didn’t make things easy getting the oil Cooler bracket to fit inside the bumper. redondoaveb likes this.

11-09-2022, 06:52 AM	#55 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,400 Drives: slowly Rep Power: 40569	Kinda suprised that the coolant temps are still high, also you are still using the stock PS cooler? I got tired of the PS fluid exploding all over the engine bay. __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

11-20-2022, 11:23 PM	#58 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	2011 Nismo#91, xxAGAVExx, ZontheRocks and 1 others like this.

11-30-2022, 10:07 AM	#59 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Just re bled the brakes with fresh srf since I had to Open the bottle. Car is ready for it’s second putting at Sebring. If this goes well I may make A push for road atlanta global Time Attack in may. 2011 Nismo#91, xxAGAVExx, sx moneypit and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forced induction	Sneakernturbo	Northern California Region	1	08-08-2016 06:53 PM
Forced Induction at last !	Optimiser	Forced Induction	4	12-31-2015 08:39 AM
Is forced Induction for me?	G6JPM	Forced Induction	17	04-05-2015 10:10 PM
[WTB] Forced induction!!!	Business Kat	Parts for sale (Private Classifieds)	30	10-16-2014 06:55 PM
Help don't want forced induction!!!!!	Mjthind	Engine & Drivetrain	64	05-04-2011 02:00 PM