Forced induction

Elmo370z · 04-25-2022, 09:54 AM

Well I’m finally have my first TT event this coming weekend. Not changing anything other then fuel (one ethanol R and when that runs out pump 85) and running 15w-50 motul 300v. There isn’t much for data out there with these set up’s. This will probably be my first and last event until fall, I’m not dealing with this Florida swamp heat. I’ll try to be as detailed as possible with the logging.

Elmo370z · 04-29-2022, 10:46 AM

First test day tomorrow.

xxAGAVExx · 04-30-2022, 07:18 AM

Where is the event?

Sent from my iPhone using Tapatalk

Elmo370z · 05-02-2022, 06:13 PM

Quote:

Originally Posted by xxAGAVExx

Where is the event?

Sent from my iPhone using Tapatalk

The firm.

Elmo370z · 05-02-2022, 06:18 PM

First track day wasn’t without its suprises. as expected when completely changing the entire set, I would have to relearn the characteristics of car. IAT’s were
Only 20-30 degree over ambient so that was good, however only mam anger to get 3 laps in before oil and coolant temps were to high, I stopped after oil temps were around 270 and coolant temps were around 244. I was expecting this to happen.
Next step is to try and duct the front end, run distilled water and open the front end up. Probably my
Last track of the summer, unless we have an oddly chill June.

xxAGAVExx · 05-02-2022, 07:47 PM

How is the track, never been up there? Do you a page for your build? What TT kit do you have and what size oil cooler? I just finished my TT build, waiting to get tuned and then I want to to get out to a track, noticed you aren’t too far from me, I’m in Bradenton now.

Sent from my iPhone using Tapatalk

Elmo370z · 05-02-2022, 07:58 PM

Quote:

Originally Posted by xxAGAVExx

How is the track, never been up there? Do you a page for your build? What TT kit do you have and what size oil cooler? I just finished my TT build, waiting to get tuned and then I want to to get out to a track, noticed you aren’t too far from me, I’m in Bradenton now.

Sent from my iPhone using Tapatalk

Mainly in the forced induction section. It’s a short course, low risk, great way to test the cars set up. It’s a modified bp kit with a g series turbo. I run a 34 row
Oil cooler, but it needs to be upgraded. Is
Martin tuning th car? I’m in the Clearwater area.

xxAGAVExx · 05-02-2022, 09:09 PM

Harry at ZTuner is tuning it. I’ve got the BP twin kit

Sent from my iPhone using Tapatalk

Elmo370z · 05-03-2022, 10:31 AM

So the cjm surge tank for the twin pumps works as advertised, didn’t experience any fuel starve the entire day.

Elmo370z · 05-17-2022, 12:59 PM

Starting the process of Making templates for boxing the front end in. Spare bumper goes on after template is made. Will try and post updates and the process is slow going.

fryzia23 · 05-17-2022, 01:36 PM

Quote:

Originally Posted by Elmo370z

Starting the process of Making templates for boxing the front end in. Spare bumper goes on after template is made. Will try and post updates and the process is slow going.

This is what I did with my setup plus cutting out all the plastic in the bumper. Helped a ton with coolant temps but having a proper front splitter helping to direct even more air through the bumper, made even more of a difference. Never had oil temps problem since added auxiliary fan to the oil cooler. And it’s only 25row but it’s in the fender well with Louvered liner.

Elmo370z · 05-17-2022, 02:32 PM

Quote:

Originally Posted by fryzia23

This is what I did with my setup plus cutting out all the plastic in the bumper. Helped a ton with coolant temps but having a proper front splitter helping to direct even more air through the bumper, made even more of a difference. Never had oil temps problem since added auxiliary fan to the oil cooler. And it’s only 25row but it’s in the fender well with Louvered liner.

You have some much more room!!!. Plan is to move that oil cooler and ps to the side.

Elmo370z · 05-17-2022, 02:53 PM

Quote:

Originally Posted by fryzia23

This is what I did with my setup plus cutting out all the plastic in the bumper. Helped a ton with coolant temps but having a proper front splitter helping to direct even more air through the bumper, made even more of a difference. Never had oil temps problem since added auxiliary fan to the oil cooler. And it’s only 25row but it’s in the fender well with Louvered liner.

What auxiliary fan are you running?

fryzia23 · 05-17-2022, 03:12 PM

Quote:

Originally Posted by Elmo370z

You have some much more room!!!. Plan is to move that oil cooler and ps to the side.

Yup no intake pipes in there definitely makes it easier but routing brake cooling hose was a tough.

I have 12inch spal fan with thermostatic temp switch. It turns on automatically at 185F

Elmo370z · 05-17-2022, 03:21 PM

Quote:

Originally Posted by fryzia23

Yup no intake pipes in there definitely makes it easier but routing brake cooling hose was a tough.

I have 12inch spal fan with thermostatic temp switch. It turns on automatically at 185F

Ty sir

04-25-2022, 09:54 AM	#1 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Forced induction Well I’m finally have my first TT event this coming weekend. Not changing anything other then fuel (one ethanol R and when that runs out pump 85) and running 15w-50 motul 300v. There isn’t much for data out there with these set up’s. This will probably be my first and last event until fall, I’m not dealing with this Florida swamp heat. I’ll try to be as detailed as possible with the logging. 2011 Nismo#91, JARblue, DarkJak and 6 others like this. Last edited by Elmo370z; 04-26-2022 at 12:50 AM.

04-29-2022, 10:46 AM	#2 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	First test day tomorrow. DarkJak, sx moneypit, NorthStyle and 1 others like this.

04-30-2022, 07:18 AM	#3 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,036 Drives: 09 370Z BLK M6 Rep Power: 53924	Where is the event? Sent from my iPhone using Tapatalk __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

05-02-2022, 06:18 PM	#5 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	First track day wasn’t without its suprises. as expected when completely changing the entire set, I would have to relearn the characteristics of car. IAT’s were Only 20-30 degree over ambient so that was good, however only mam anger to get 3 laps in before oil and coolant temps were to high, I stopped after oil temps were around 270 and coolant temps were around 244. I was expecting this to happen. Next step is to try and duct the front end, run distilled water and open the front end up. Probably my Last track of the summer, unless we have an oddly chill June. 2011 Nismo#91, DarkJak, Rusty and 3 others like this.

05-02-2022, 07:47 PM	#6 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,036 Drives: 09 370Z BLK M6 Rep Power: 53924	How is the track, never been up there? Do you a page for your build? What TT kit do you have and what size oil cooler? I just finished my TT build, waiting to get tuned and then I want to to get out to a track, noticed you aren’t too far from me, I’m in Bradenton now. Sent from my iPhone using Tapatalk __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

05-02-2022, 09:09 PM	#8 (permalink)
xxAGAVExx A True Z Fanatic Join Date: Nov 2012 Location: Tampa Posts: 1,036 Drives: 09 370Z BLK M6 Rep Power: 53924	Harry at ZTuner is tuning it. I’ve got the BP twin kit Sent from my iPhone using Tapatalk Elmo370z and ZontheRocks like this. __________________ l 09/6MT l BP Twin Turbo Kit l E-85 w/Fuel Return l FI 18" Res CF CBE l Powertrix Ultra-Lite Coilovers l Wavetrac LSD \| Lots of SPL and Carbon Fiber \|

05-03-2022, 10:31 AM	#9 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	So the cjm surge tank for the twin pumps works as advertised, didn’t experience any fuel starve the entire day. JARblue, xxAGAVExx, redondoaveb and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forced induction	Sneakernturbo	Northern California Region	1	08-08-2016 06:53 PM
Forced Induction at last !	Optimiser	Forced Induction	4	12-31-2015 08:39 AM
Is forced Induction for me?	G6JPM	Forced Induction	17	04-05-2015 10:10 PM
[WTB] Forced induction!!!	Business Kat	Parts for sale (Private Classifieds)	30	10-16-2014 06:55 PM
Help don't want forced induction!!!!!	Mjthind	Engine & Drivetrain	64	05-04-2011 02:00 PM