FS Performance V1 Nismo splitter/undertray

redondoaveb · 01-03-2021, 08:55 PM

Quote:

Originally Posted by Spooler

Thing for me is I don't want to buy somethings else that doesn't work as intended. I would rather spend more and have a quality piece that works.

Without seeing wind tunnel tests, you really won't know without trying it and it could end up being a waste of money. In my case, I definitely want functionality but I'm not going to install one that sticks out 6 inches either. I'd rip that thing off the first time I pull into my carport and it just doesn't make sense for a daily driver. I'm kind of screwed. It looks like you can't have the best of both worlds. I'd have to go with this one (if I get one) and hope it provides some kind of functionality (it does look nice) because I can't/won't put a true track splitter on my daily driver because it wouldn't last a week.

Spooler · 01-03-2021, 09:18 PM

Quote:

Originally Posted by redondoaveb

Without seeing wind tunnel tests, you really won't know without trying it and it could end up being a waste of money. In my case, I definitely want functionality but I'm not going to install one that sticks out 6 inches either. I'd rip that thing off the first time I pull into my carport and it just doesn't make sense for a daily driver. I'm kind of screwed. It looks like you can't have the best of both worlds. I'd have to go with this one (if I get one) and hope it provides some kind of functionality (it does look nice) because I can't/won't put a true track splitter on my daily driver because it wouldn't last a week.

Exactly, I am not putting a 6in long one on my car either. They look stupid and they may or may not work. Plus, I drag mine a good many of places. Putting the car in my trailer would be even worse. Still not sure what I want to do yet.

redondoaveb · 01-03-2021, 09:28 PM

Quote:

Originally Posted by Spooler

Exactly, I am not putting a 6in long one on my car either. They look stupid and they may or may not work. Plus, I drag mine a good many of places. Putting the car in my trailer would be even worse. Still not sure what I want to do yet.

This one is one of the nicer ones I've seen for what it is. Looking at the pics in their pdf, it appears to be pretty good quality. Not sure what I'm going to do either but I just don't see a lot of better options out there. Not for the V1 bumper.

Rusty · 01-03-2021, 09:57 PM

The way I have my APR splitter. It sticks out 3.5". If I even have to redo it. Think I would go 4.5" to 5".

Rusty · 01-03-2021, 09:59 PM

Quote:

Originally Posted by Spooler

Exactly, I am not putting a 6in long one on my car either. They look stupid and they may or may not work. Plus, I drag mine a good many of places. Putting the car in my trailer would be even worse. Still not sure what I want to do yet.

Putting mine on a trailer would take some doing.

Spooler · 01-03-2021, 09:59 PM

Quote:

Originally Posted by redondoaveb

This one is one of the nicer ones I've seen for what it is. Looking at the pics in their pdf, it appears to be pretty good quality. Not sure what I'm going to do either but I just don't see a lot of better options out there. Not for the V1 bumper.

I looked at that also. It appears they did not connect the splitter/Undertray to the inner fender liner. That's a no go for me. We need that support because if it is not there, the front facia will buffet around and good bit.

Spooler · 01-03-2021, 10:01 PM

Quote:

Originally Posted by Rusty

Putting mine on a trailer would take some doing.

You are at stock ride height too. I just about drag mine. I have a weensy bit of space to get on/off with boards.

Rusty · 01-03-2021, 10:01 PM

Quote:

Originally Posted by Spooler

I looked at that also. It appears they did not connect the splitter/Undertray to the inner fender liner. That's a no go for me. We need that support because if it is not there, the front facia will buffet around and good bit.

I had to use sheet aluminum there.

Spooler · 01-03-2021, 10:03 PM

I have used my trailer more than I ever thought I would, that is for sure.

Spooler · 01-03-2021, 10:08 PM

I am kinda waiting to see what Hotrodz's guys do.

redondoaveb · 01-03-2021, 10:12 PM

Quote:

Originally Posted by Spooler

I looked at that also. It appears they did not connect the splitter/Undertray to the inner fender liner. That's a no go for me. We need that support because if it is not there, the front facia will buffet around and good bit.

Well, if you let me know how you think it should attach to the fender liner, he said let him know if there's anything we would want changed or added to it.

Spooler · 01-03-2021, 10:17 PM

Quote:

Originally Posted by redondoaveb

Well, if you let me know how you think it should attach to the fender liner, he said let him know if there's anything we would want changed or added to it.

It should attach like the Zspeed undertray does to the fender liner with 3 bolts. That will give us the needed stability. We don't need the brake duct things either.

Spooler · 01-03-2021, 10:19 PM

Need some better bolt head solution. I will drag those things everywhere.

redondoaveb · 01-03-2021, 10:20 PM

Quote:

Originally Posted by Spooler

It should attach like the Zspeed undertray does to the fender liner with 3 bolts. That will give us the needed stability. We don't need the brake duct things either.

I'll bring that up to him. He's only familiar with the stock undershroud. When I get my car back here shortly I'll be replacing my passenger fender liner with a vented one I fabricated. I'll send him pics of how my z speed attaches to the fender liner.

redondoaveb · 01-03-2021, 10:21 PM

Quote:

Originally Posted by Spooler

Need some better bolt head solution. I will drag those things everywhere.

That was my concern too

01-03-2021, 09:57 PM	#34 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,184 Drives: 2011 Nismo GM 6M Rep Power: 2684437	The way I have my APR splitter. It sticks out 3.5". If I even have to redo it. Think I would go 4.5" to 5". redondoaveb likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

01-03-2021, 10:03 PM	#39 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	I have used my trailer more than I ever thought I would, that is for sure. Rusty likes this.

01-03-2021, 10:08 PM	#40 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	I am kinda waiting to see what Hotrodz's guys do. Rusty likes this.

01-03-2021, 10:19 PM	#43 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	Need some better bolt head solution. I will drag those things everywhere. redondoaveb likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Zspeed undertray for 2015+ nismo	OptionZero	Parts for sale (Private Classifieds)	14	07-17-2020 07:52 PM
[WTB] WTB: Nismo 09-14 Lip or undertray	NismoNick	Parts for sale (Private Classifieds)	0	06-07-2017 11:44 PM
[WTB] Nismo metal undertray	Kamillio	Parts for sale (Private Classifieds)	0	12-21-2016 09:03 AM
[WTB] ZSpeed Nismo undertray	ZeNato	Parts for sale (Private Classifieds)	6	10-30-2014 06:21 PM
[WTB] Nismo z speed undertray	kornflake7	Parts for sale (Private Classifieds)	3	09-02-2014 08:38 AM