Speed Sensor Alternative?

Wigjiggy · 10-25-2020, 08:57 AM

I recently replaced my OEM ABS with the BMW MK60 unit. Amazing difference, but has posed a small problem. Since I no longer get a wheel speed signal to the ECU, my rev match “blipper” no longer woks. Do you guys know of an alternative to re establishing that signal so maybe it will work again (I’m not very good at heal-toe)? I’ve looked at the AEM GPS speedometer, and a transmission swap speedometer pickup as options, but not sure if either of those are viable or effective options. Thanks for any advice.

SonicVQ · 10-25-2020, 09:36 AM

The MK60 outputs conditioned digital wheel speed data in both 5v and 12v depending on configuration. However, this signal won't work for the 370z.

In stock form, the vehicle speed is sent from the ABS module via the CAN Bus to the BCM and Unified meter and A/C amp modules. From there the Unified meter and A/C amp module sends the vehicle speed to 4-7 other modules, depending on options.

The wheel speed signal needs to be converted (pulses to vehicle speed) and then broadcast on the CAN bus network in the same data format as the original ABS module.

I am not aware of any module that can do this, so it would have to be custom built and programmed.

Hotrodz · 10-25-2020, 12:34 PM

Learn to heel toe! You can be as proficient or better than the auto rev match.

Sent from my SM-G965U using Tapatalk

Wigjiggy · 10-25-2020, 01:37 PM

Quote:

Originally Posted by SonicVQ

The MK60 outputs conditioned digital wheel speed data in both 5v and 12v depending on configuration. However, this signal won't work for the 370z.

In stock form, the vehicle speed is sent from the ABS module via the CAN Bus to the BCM and Unified meter and A/C amp modules. From there the Unified meter and A/C amp module sends the vehicle speed to 4-7 other modules, depending on options.

The wheel speed signal needs to be converted (pulses to vehicle speed) and then broadcast on the CAN bus network in the same data format as the original ABS module.

I am not aware of any module that can do this, so it would have to be custom built and programmed.

That’s great info! Thank you. I guess I’ll just have to practice heal-toe for now.

Wigjiggy · 10-25-2020, 01:38 PM

Yeah. I guess my days of being a lazy driver are over. At least the car stops on a dime now. I wish I had switched to the BMW ABS long ago!

Hotrodz · 10-25-2020, 03:17 PM

So besides better stopping distance, are better able to modulate the brakes and is brake feel increased?

Sent from my SM-G965U using Tapatalk

Wigjiggy · 10-25-2020, 05:11 PM

Quote:

Originally Posted by Hotrodz

So besides better stopping distance, are better able to modulate the brakes and is brake feel increased?

Sent from my SM-G965U using Tapatalk

Modulation is something I’m working on. Just did a few days at Daytona and pedal was really sensitive, which made modulating tricky. I’m at Sebring next weekend (my home track) and will really be able to test it out fully. I may end up removing the brake booster if it remains that sensitive.

Hotrodz · 10-25-2020, 05:39 PM

Quote:

Originally Posted by Wigjiggy

Modulation is something I’m working on. Just did a few days at Daytona and pedal was really sensitive, which made modulating tricky. I’m at Sebring next weekend (my home track) and will really be able to test it out fully. I may end up removing the brake booster if it remains that sensitive.

Let us know what you learn!

Sent from my SM-G965U using Tapatalk

thekinn · 10-25-2020, 10:18 PM

I'm not sure if it'll work with the 370Z, but with my 350Z, I was able to split my ABS unit in half. Leaving the electronic connector portion so I could keep the tach, etc working.. but get rid of the ABS.

Maybe this would work for you too? Not sure how you've got things connected..

Wigjiggy · 10-26-2020, 11:29 AM

Quote:

Originally Posted by thekinn

I'm not sure if it'll work with the 370Z, but with my 350Z, I was able to split my ABS unit in half. Leaving the electronic connector portion so I could keep the tach, etc working.. but get rid of the ABS.

Maybe this would work for you too? Not sure how you've got things connected..

Thanks. I’ll look into that approach. I did leave the old unit in the car because the ECU needs to see that it’s at least there.

thekinn · 10-26-2020, 07:27 PM

Quote:

Originally Posted by Wigjiggy

Thanks. I’ll look into that approach. I did leave the old unit in the car because the ECU needs to see that it’s at least there.

Ahh.. Well if you have the wires connected to the old unit, I guess you've already tried that solution then. I don't think splitting it in half will help any.

Elmo370z · 10-29-2020, 09:40 PM

Quote:

Originally Posted by Wigjiggy

Thanks. I’ll look into that approach. I did leave the old unit in the car because the ECU needs to see that it’s at least there.

You will have to convert to a stand-alone unfortunately to get the rev match to work far as I know. Emtron kv16 but you don’t have any can bus integration (so custom patch harness to get full can bus control) , haltech nexus R5 has all the can bus protocol just needs a harness made, motec m150 full plug n play, take the factory Ecu out plug the motec in and start tuning and figuring **** out. Since the Z is blackballed ( for whatever reason) in any type of racing there isn’t much out there. So guys like you have to pave the way or spend time working around the factory Ecu.

Tedmeister · 11-01-2020, 04:52 PM

Just install the AutoBlip. It actually works better than the factory rev match, because
it is only active if you are applying the brake, so no over rev if you are upshifting and
accidentally move the shifter in the direction of a downshift. Costs $ 400.00.

Wigjiggy · 11-01-2020, 07:40 PM

Quote:

Originally Posted by Mick B

Just install the AutoBlip. It actually works better than the factory rev match, because
it is only active if you are applying the brake, so no over rev if you are upshifting and
accidentally move the shifter in the direction of a downshift. Costs $ 400.00.

Looks very interesting! I’ll look into it. Thank you.

justin_boy · 11-13-2020, 02:21 PM

dude you have a race car!!!! learn how to heal toe...wayyyy more satisfying
the synchro rev takes all the fun away of a manual

also its really easy the way our pedals are placed. Its more a shove with ridge of your foot to your gas pedal than it is a heel toe, if that helps

10-25-2020, 08:57 AM	#1 (permalink)
Wigjiggy Base Member Join Date: Jan 2019 Location: Florida Posts: 127 Drives: 2013 370Z Rep Power: 6	Speed Sensor Alternative? I recently replaced my OEM ABS with the BMW MK60 unit. Amazing difference, but has posed a small problem. Since I no longer get a wheel speed signal to the ECU, my rev match “blipper” no longer woks. Do you guys know of an alternative to re establishing that signal so maybe it will work again (I’m not very good at heal-toe)? I’ve looked at the AEM GPS speedometer, and a transmission swap speedometer pickup as options, but not sure if either of those are viable or effective options. Thanks for any advice.

10-25-2020, 09:36 AM	#2 (permalink)
SonicVQ Base Member Join Date: Jan 2016 Location: Ontario Posts: 230 Drives: G37 Sport Rep Power: 6720	The MK60 outputs conditioned digital wheel speed data in both 5v and 12v depending on configuration. However, this signal won't work for the 370z. In stock form, the vehicle speed is sent from the ABS module via the CAN Bus to the BCM and Unified meter and A/C amp modules. From there the Unified meter and A/C amp module sends the vehicle speed to 4-7 other modules, depending on options. The wheel speed signal needs to be converted (pulses to vehicle speed) and then broadcast on the CAN bus network in the same data format as the original ABS module. I am not aware of any module that can do this, so it would have to be custom built and programmed. Optimiser likes this.

10-25-2020, 12:34 PM	#3 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Learn to heel toe! You can be as proficient or better than the auto rev match. Sent from my SM-G965U using Tapatalk JARblue, sx moneypit and Wigjiggy like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

10-25-2020, 01:38 PM	#5 (permalink)
Wigjiggy Base Member Join Date: Jan 2019 Location: Florida Posts: 127 Drives: 2013 370Z Rep Power: 6	Yeah. I guess my days of being a lazy driver are over. At least the car stops on a dime now. I wish I had switched to the BMW ABS long ago! Hotrodz and Elmo370z like this.

10-25-2020, 03:17 PM	#6 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	So besides better stopping distance, are better able to modulate the brakes and is brake feel increased? Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

10-25-2020, 10:18 PM	#9 (permalink)
thekinn Base Member Join Date: Sep 2009 Location: Michigan Posts: 205 Drives: 06 350Z LS MT Rep Power: 6862	I'm not sure if it'll work with the 370Z, but with my 350Z, I was able to split my ABS unit in half. Leaving the electronic connector portion so I could keep the tach, etc working.. but get rid of the ABS. Maybe this would work for you too? Not sure how you've got things connected.. JARblue and Hotrodz like this. __________________ 06 Enthusiast MT - v2

11-01-2020, 04:52 PM	#13 (permalink)
Tedmeister Base Member Join Date: Feb 2017 Location: Florida Posts: 68 Drives: 12 M6 Rep Power: 6776	Just install the AutoBlip. It actually works better than the factory rev match, because it is only active if you are applying the brake, so no over rev if you are upshifting and accidentally move the shifter in the direction of a downshift. Costs $ 400.00. Hotrodz, Elmo370z, Spooler and 1 others like this.

11-13-2020, 02:21 PM	#15 (permalink)
justin_boy Track Member Join Date: May 2015 Location: woodland hills Posts: 600 Drives: z34 Rep Power: 8367	dude you have a race car!!!! learn how to heal toe...wayyyy more satisfying the synchro rev takes all the fun away of a manual also its really easy the way our pedals are placed. Its more a shove with ridge of your foot to your gas pedal than it is a heel toe, if that helps Last edited by justin_boy; 11-13-2020 at 02:24 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Part Number Request: Wheel Speed Sensor	osbornsm	Wheels & Tires	4	06-15-2017 10:44 AM
P2A00 - A/F Sensor Circuit Range/Performance (bank 1 sensor 1)	jwick	Forced Induction	60	06-11-2015 04:22 PM
Speed Sensor Disconnect for Nav Unit	BernieB	DIY Section (Do-It-Yourself)	5	02-02-2011 09:10 PM
TSB: 2007-2011 Nissan Vehicles: ABS/VDC WHEEL SPEED SENSOR DIAGNOSIS	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	11-25-2010 01:26 AM
Disable motion/speed sensor?	Mhaddy	Audio & Video	9	04-12-2010 05:01 PM