Originally Posted by gomer_110 Why use other peoples' corner weights instead of just putting your car on a set of scales? I have to imagine you'd be able to find
|
|
LinkBack | Thread Tools | Display Modes |
07-08-2019, 09:07 PM | #46 (permalink) |
A True Z Fanatic
Join Date: Aug 2012
Location: NW, AZ
Posts: 9,330
Drives: 10 Nissan 370z Nismo
Rep Power: 2684385 |
That is the problem...my car is a roller (blown motor) and there is no one in my small town that has scales. I don't think it is going to make that big a difference as the variance in all the cars is not all that great so an average will work. We all pretty much run the same spring rates anyway and it is based on the average weight of a Z.
__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer| |
07-08-2019, 10:38 PM | #47 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,217
Drives: 2011 Nismo GM 6M
Rep Power: 2684438 |
You will end up with a wing.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
07-09-2019, 02:54 PM | #50 (permalink) |
Track Member
Join Date: Jan 2011
Location: South Orange County, CA
Posts: 885
Drives: 2011 370z Red 6MT
Rep Power: 10656 |
Honestly, there aren't many wings out there that can claim that they've been track proven in a wheel to wheel racing series like Super Taikyu on the 370Z and 350Z platforms. I think CWEST is maybe the only other one but they never made anything for the Z34. It's definitely a nice kit, I'm considering replacing the end plates with something similar to the Singular pieces Hotrodz is running.
|
07-09-2019, 06:54 PM | #51 (permalink) | |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,217
Drives: 2011 Nismo GM 6M
Rep Power: 2684438 |
Quote:
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
|
07-09-2019, 07:40 PM | #52 (permalink) | |
A True Z Fanatic
Join Date: Jun 2014
Location: Ga
Posts: 13,830
Drives: 2013 Nismo 370z
Rep Power: 2684392 |
Quote:
|
|
07-09-2019, 09:24 PM | #53 (permalink) |
A True Z Fanatic
Join Date: Aug 2012
Location: NW, AZ
Posts: 9,330
Drives: 10 Nissan 370z Nismo
Rep Power: 2684385 |
It is function over form. The big end plates aid in moving air more efficiently around the outside of the wing.
__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer| |
07-20-2019, 03:42 AM | #55 (permalink) |
Track Member
Join Date: Jun 2011
Location: Delafield, WI
Age: 44
Posts: 618
Drives: 09 370Z, 14 SRT GC
Rep Power: 35 |
Not meaning to jack a thread (I've already sub'd to it), but Eagle, who did you order the Ings+1 wing from? I am looking into getting the regular ZPower wing with the taller uprights.
__________________
___________ '09 6sp/Z1/PowerTrix/SPL/Swift/SRP/Whiteline/F.I.LTH&CBE/UpRev by Seb/CJM/Stillen/Ings+1/RJM/TrackSpec/Sparco/Motul/Wavetrac/Coolerworx/Verus/CraftSquare '14 SRT Grand Cherokee; '08 TL Type-S |
07-20-2019, 02:50 PM | #56 (permalink) |
A True Z Fanatic
|
Very interesting thread
If I remember right, SPL says that going from OEM bucket to true type increases effective spring rate by 1.66. Currently running a custom front splitter with air dam with around +.5 degree AOA with 3" of protrusion. Rear wing is a Aeromotions 72" (DO NOT BUY. It works well but a **** company.) with 6 degreesl AOA. Spring rates are 14k F rear 12k in OEM bucket. So if I went to a true type I'd need somewhere around 7.2kg springs to maintain the current balance. Balance of the car is setup to understeer slightly right now. with a degree less in the wing it was almost perfectly balanced. I was running these spring rates without aero and now with. I definitely feel that I could use a bit more rate purely going off my amateur seat of pants feel. Here's SPL's spring size calculator but it's where I grabbed the info about the spring location modifier (spring motion ratio) http://www.splparts.com/content/SpringCalculator.xls
__________________
09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay Last edited by Spec Jay; 07-20-2019 at 06:32 PM. |
07-20-2019, 03:53 PM | #57 (permalink) |
A True Z Fanatic
Join Date: Apr 2011
Location: Sacramento
Posts: 3,235
Drives: 15 370Z Nismo 6MT
Rep Power: 214100 |
what fender vents?
they look a hell of alot like the 2020 GTR NISMO's...
__________________
OptionZero Build Thread |
07-20-2019, 04:03 PM | #58 (permalink) | |
A True Z Fanatic
Join Date: Aug 2012
Location: NW, AZ
Posts: 9,330
Drives: 10 Nissan 370z Nismo
Rep Power: 2684385 |
Quote:
If it has high speed understeer, lower the front of the car. If it has oversteer, maybe take the main plain of the wing to 0 degrees (parallel to the ground). If it still oversteers, raise the front of the car to reduce front down I enjoy following you on Instagram!
__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer| |
|
07-20-2019, 04:21 PM | #59 (permalink) |
A True Z Fanatic
Join Date: Jun 2014
Location: Ga
Posts: 13,830
Drives: 2013 Nismo 370z
Rep Power: 2684392 |
Here are my weights with 200lbs in the drivers seat without the swaybars disconnected. They will be doing this with it disconnect to check the corner balance. She is a hefty girl now. This was a quick throw the scales under it after it was aligned.
LF: 1055 RF:971 LR: 859 RR: 848 Front: 51.27% Rear: 45.73% Cross weights: 49.02 Total Weight: 3733lb Last edited by Spooler; 07-20-2019 at 04:29 PM. |
07-20-2019, 06:44 PM | #60 (permalink) | ||
A True Z Fanatic
|
Quote:
Quote:
https://professionalawesome.com/prod...iffusers-pair/ I like it balanced to have to slight understeer just cause it makes me a little more comfortable getting on the go pedal on corner exit. you may like it since you and I have more than enough power to correct understeer with go pedal haha. Right now I have a 0.5" of rake. It made a huge difference from when I initially did the aero. Heres a before and after. Granted it's on the front straight but it gives a good visual about how suspension and aero settings work at balancing the car. Wing was set at the middle setting around 10 degrees front had a positive 3 or 4 on the splitterwithout the air dam and zero rake. Was terminally understeer heavy. Thanks for the compliments!
__________________
09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay Last edited by Spec Jay; 07-20-2019 at 07:02 PM. |
||
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[FOR SALE] Fortune auto 500 coilovers (true rear type) SOCAL | royvaldizno | Parts for sale (Private Classifieds) | 35 | 03-29-2018 12:40 PM |
[WTB] True Type coilovers | scope22 | Parts for sale (Private Classifieds) | 0 | 12-20-2017 05:09 PM |
Looking to get true type coilovers | scope22 | Suspension/Brakes | 0 | 12-20-2017 12:50 PM |
Stance XR1 vs. Fortune Auto 500 True-Type Coilovers | ZahyMatar | Brakes & Suspension | 7 | 06-08-2017 01:15 AM |
True-type coilovers | AdamMD | Wanted | 2 | 07-01-2015 04:18 PM |