Aero and Suspension Tuning With True Type Coilovers

Rusty · 07-05-2019, 09:27 PM

I've always had this questions in the back of my mind on this subject. I've seen a number of set-ups that the divorced set-up vs true type run close to the same spring rates. And some of this is from the companies that make true type. And suggest a spring rate too high from what Bobby is saying. Which I believe too. Thanks Bobby to bring this to light.

Hotrodz · 07-05-2019, 10:12 PM

Quote:

Originally Posted by Rusty

I've always had this questions in the back of my mind on this subject. I've seen a number of set-ups that the divorced set-up vs true type run close to the same spring rates. And some of this is from the companies that make true type. And suggest a spring rate too high from what Bobby is saying. Which I believe too. Thanks Bobby to bring this to light.

I am really happy that this is helpful. I really lucked out on finding someone that understands this stuff and can make sense of it to someone that knows enough to be dangerous and mean that literally.!

OptionZero · 07-06-2019, 12:09 AM

I remember reading about this

Where the spring is located is physically changed when u go from OEM type to true type
Since the OEM spring rates are based on oem locations, and the tuners are using that same geometry to do their math, it stands to reason that changing that spring location changes the geometry and requires new math to find ideal spring rates

cv129 · 07-06-2019, 07:04 AM

Quote:

Originally Posted by OptionZero

I remember reading about this

Where the spring is located is physically changed when u go from OEM type to true type
Since the OEM spring rates are based on oem locations, and the tuners are using that same geometry to do their math, it stands to reason that changing that spring location changes the geometry and requires new math to find ideal spring rates

I wouldn’t say geometry has changed. The arc of which the arms move are still the same. There’s no change to how camber and toe build up as the springs get compressed.

It’s the physics that changed. Imagine using the same spring, moving the spring outward to the hub makes it much harder to compress the spring, therefore a lower spring rate is needed to compensate.

Hotrodz · 07-06-2019, 10:22 AM

Quote:

Originally Posted by cv129

I wouldn’t say geometry has changed. The arc of which the arms move are still the same. There’s no change to how camber and toe build up as the springs get compressed.

It’s the physics that changed. Imagine using the same spring, moving the spring outward to the hub makes it much harder to compress the spring, therefore a lower spring rate is needed to compensate.

Nailed it, as this is what I have read and was explained to me!

gomer_110 · 07-06-2019, 11:57 AM

One thing to keep in mind is that while the geometry doesn't "really" change, it can be slightly different with respect to the angle the spring is acting on the suspension arms. This is why when calculating suspension numbers like motion ratio, wheel rate, and suspension frequency, you have to do some trigonometry with the angle the spring is at.

cv129 · 07-06-2019, 12:00 PM

Quote:

Originally Posted by Hotrodz

Nailed it, as this is what I have read and was explained to me!

I remember my first time reading a discussion about this on a wrx forum, it went over my head completely. Looking forward to the results. This thread makes me think twice about my own rear rate.

Hotrodz · 07-06-2019, 12:13 PM

Quote:

Originally Posted by cv129

I remember my first time reading a discussion about this on a wrx forum, it went over my head completely. Looking forward to the results. This thread makes me think twice about my own rear rate.

It is agonizing for me as I want to get the info, make the adjustments and test them but the testing will have to wait until my motor is built and installed. I still have ETA on delivery.

Spooler · 07-06-2019, 01:33 PM

I should have corner weights when they set the alignment on my car. They are supposed to check them since I am corner balanced. I will get them to you when/if that happens.

SS_Firehawk · 07-06-2019, 01:45 PM

Honestly, you should be ordering your spring rates based on how much downforce your car is going to produce at certain speeds. A bucket type coilover system, the spring is far closer to the hinge, so it needs a lot more spring weight to compensate. Running a true style, without aero, 6k is on the mark based on my research. I might want to bump it up to a 7k to compensate for your aero. Just my 2 cents. It would probably settle down the rear a lot powering out, under braking and on bumpy surfaces or rumble strips.

It sounds dumb, but chassis tuning on Forza, I drop the damper and spring rates a lot to settle rear down and add a bit of toe in. It's not real life, but I'd imagine the logic is the same.

Edit: Totally wrote this blind and happy others kind of confirmed my thoughts. I run stock Nismo aero and Swifts. I'm basic lol.

BettyZ · 07-06-2019, 02:23 PM

Quote:

Originally Posted by Hotrodz

It is agonizing for me as I want to get the info, make the adjustments and test them but the testing will have to wait until my motor is built and installed. I still have ETA on delivery.

I feel like your motor build wait has been going on for at least 3 years.. cant imagine what it's like for you lol

Sent from my SM-G955U using Tapatalk

Hotrodz · 07-06-2019, 02:57 PM

Quote:

Originally Posted by SS_Firehawk

Honestly, you should be ordering your spring rates based on how much downforce your car is going to produce at certain speeds. A bucket type coilover system, the spring is far closer to the hinge, so it needs a lot more spring weight to compensate. Running a true style, without aero, 6k is on the mark based on my research. I might want to bump it up to a 7k to compensate for your aero. Just my 2 cents. It would probably settle down the rear a lot powering out, under braking and on bumpy surfaces or rumble strips.

It sounds dumb, but chassis tuning on Forza, I drop the damper and spring rates a lot to settle rear down and add a bit of toe in. It's not real life, but I'd imagine the logic is the same.

Edit: Totally wrote this blind and happy others kind of confirmed my thoughts. I run stock Nismo aero and Swifts. I'm basic lol.

You are not wrong! That being said if your suspension is not set properly the influences from the aero can have significant impact on handling and that is why he stated that with the spring rates I am currently running and the downforce from the wing will cause the car to oversteer significantly because you are loading the rear of the vehicle and unloading or adding lift to the front of the vehicle. The fix will allow me then to do aero tuning that I need to maximize front and rear aero.

So my initial question to Danial at Awesome Performance Racing was did he think adding front splitter diffusers would be beneficial with my current setup and the whp I will be running in the future? He initially said no and then after I sent him information on my coilovers, he provide the information I posted and he asked me for some data so he could figure out the best spring rates for my Z. He specifically asked for corner spring weights and for me to give him the spring lengths front and rear when the car is unloaded and then compressed as this all matters when considering spring weight and drupe. The other thing to consider is that if your wheel rates are off you can over work your rear diff. This maybe one of the reasons some have issues with overheating their rear diff at the track or on canyon roads.

I figure if he wants to help me fine tune my car setup I am going to listen and take in all the information I can. His credentials and the people race team he works with speaks volumes. Oh and he said the diffusers would be beneficial.

Hotrodz · 07-06-2019, 02:59 PM

Quote:

Originally Posted by BettyZ

I feel like your motor build wait has been going on for at least 3 years.. cant imagine what it's like for you lol

Sent from my SM-G955U using Tapatalk

LMAO it does feel like three years but it has only been since November last year.

Elmo370z · 07-07-2019, 05:32 PM

Quote:

Originally Posted by Hotrodz

You are not wrong! That being said if your suspension is not set properly the influences from the aero can have significant impact on handling and that is why he stated that with the spring rates I am currently running and the downforce from the wing will cause the car to oversteer significantly because you are loading the rear of the vehicle and unloading or adding lift to the front of the vehicle. The fix will allow me then to do aero tuning that I need to maximize front and rear aero.

So my initial question to Danial at Awesome Performance Racing was did he think adding front splitter diffusers would be beneficial with my current setup and the whp I will be running in the future? He initially said no and then after I sent him information on my coilovers, he provide the information I posted and he asked me for some data so he could figure out the best spring rates for my Z. He specifically asked for corner spring weights and for me to give him the spring lengths front and rear when the car is unloaded and then compressed as this all matters when considering spring weight and drupe. The other thing to consider is that if your wheel rates are off you can over work your rear diff. This maybe one of the reasons some have issues with overheating their rear diff at the track or on canyon roads.

I figure if he wants to help me fine tune my car setup I am going to listen and take in all the information I can. His credentials and the people race team he works with speaks volumes. Oh and he said the diffusers would be beneficial.

Then help me out

Brendan · 07-07-2019, 07:43 PM

This may be the first time I rated a thread 5 stars un-ironically.

07-05-2019, 09:27 PM	#16 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,170 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I've always had this questions in the back of my mind on this subject. I've seen a number of set-ups that the divorced set-up vs true type run close to the same spring rates. And some of this is from the companies that make true type. And suggest a spring rate too high from what Bobby is saying. Which I believe too. Thanks Bobby to bring this to light. Hotrodz, Spooler and sx moneypit like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-06-2019, 12:09 AM	#18 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,223 Drives: 15 370Z Nismo 6MT Rep Power: 214100	I remember reading about this Where the spring is located is physically changed when u go from OEM type to true type Since the OEM spring rates are based on oem locations, and the tuners are using that same geometry to do their math, it stands to reason that changing that spring location changes the geometry and requires new math to find ideal spring rates __________________ OptionZero Build Thread

07-06-2019, 11:57 AM	#21 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	One thing to keep in mind is that while the geometry doesn't "really" change, it can be slightly different with respect to the angle the spring is acting on the suspension arms. This is why when calculating suspension numbers like motion ratio, wheel rate, and suspension frequency, you have to do some trigonometry with the angle the spring is at. DarkJak, cv129, Rusty and 2 others like this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

07-06-2019, 01:33 PM	#24 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,788 Drives: 2013 Nismo 370z Rep Power: 2684392	I should have corner weights when they set the alignment on my car. They are supposed to check them since I am corner balanced. I will get them to you when/if that happens. Hotrodz likes this.

07-06-2019, 01:45 PM	#25 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Honestly, you should be ordering your spring rates based on how much downforce your car is going to produce at certain speeds. A bucket type coilover system, the spring is far closer to the hinge, so it needs a lot more spring weight to compensate. Running a true style, without aero, 6k is on the mark based on my research. I might want to bump it up to a 7k to compensate for your aero. Just my 2 cents. It would probably settle down the rear a lot powering out, under braking and on bumpy surfaces or rumble strips. It sounds dumb, but chassis tuning on Forza, I drop the damper and spring rates a lot to settle rear down and add a bit of toe in. It's not real life, but I'd imagine the logic is the same. Edit: Totally wrote this blind and happy others kind of confirmed my thoughts. I run stock Nismo aero and Swifts. I'm basic lol. Hotrodz likes this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 07-06-2019 at 01:54 PM.

07-07-2019, 07:43 PM	#30 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 640 Drives: Poor man's Porsche Rep Power: 542	This may be the first time I rated a thread 5 stars un-ironically. Rusty, Hotrodz and TMRN370z like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fortune auto 500 coilovers (true rear type) SOCAL	royvaldizno	Parts for sale (Private Classifieds)	35	03-29-2018 12:40 PM
[WTB] True Type coilovers	scope22	Parts for sale (Private Classifieds)	0	12-20-2017 05:09 PM
Looking to get true type coilovers	scope22	Suspension/Brakes	0	12-20-2017 12:50 PM
Stance XR1 vs. Fortune Auto 500 True-Type Coilovers	ZahyMatar	Brakes & Suspension	7	06-08-2017 01:15 AM
True-type coilovers	AdamMD	Wanted	2	07-01-2015 04:18 PM