Wheels / Tires for Track Time

OptionZero

I'm a big fan of the Enkei NT03+M. Comes in 18x10.5 +30

Their newer "RR" line also has all sorts of sizes, but are a bit pricey compared to the prior line

Also, dig for used TE37's or Ce28n's if you can. Can't get better than that

__________________
OptionZero Build Thread

AlWakRa

__________________

///maestro

thats 18x10.5 with et 18 all around???

__________________

AlWakRa

Yes, with 10mm rear spacers, -2.7 front camber -2.0 rear camber

__________________

NLZN

I have a lot of track and autox on these.
Konig Ultraform, 18x10.5 +25, 20mm spacer in the rear to flush. Currently on 285 re71

__________________
Intake | HFC's | CBE | Nismo 1.5 | Suspension Stuff | CMAK | Ecutek | 321 WHP

Brendan

I wish we had more options in 275/40

///maestro

That's absolutely crazy. Here's Thomas' car with those same specs and -3.1 camber.







I was seriously considering buying these wheels but opted not to due to how far they poke. I didn't want to destroy my front fenders. So it's crazy to see your car with these same specs and have them fit way more flush with less camber.

__________________

OptionZero

That doesn't sound right to me

the red Z . . . that front spec of 18x10.5 +18 should not stick out that much
unless its just some wierd photography, that looks like it sticks out more than my fronts (20x11 +15)

Are we sure "Thomas" doesn't have spacers?

__________________
OptionZero Build Thread

Brendan

you're even running the same tires in the pic. crazy.

///maestro

Well he’s got really meaty tires. I mean unless he lied to me and told me incorrect information (not sure why he would do that). More pics on his Instagram @timeattack370

__________________

AlWakRa

About Thomas car, in the last photo, it doesn't look like he has any negative camber, very minimal, his wheels are nt03rr which comes in 18×10.5+15 or 18×11+15, if the later, it will be farther out by nearly 10mm than mine, but I think his wheels are 10.5

With my car and my camber, it is very flush, I think it rubbed the fender twice at the track.

Now, I am sitting at -3.25 front, but changed my tires, I can get a photo with my other wheels, 19×9.5+22 275/35/19 which should be the same height and about 5mm inside (the wheels would be around 17mm inside) compared to my 18 wheels.

__________________

///maestro

His wheels aren't NT03rr...they are Konig Dekagram's which come in 18x10.5 +18. And I agree, his wheels look like they do not have -3 camber. Because of these pictures, I opted out to NOT get these wheels, I ended up getting Konig Ampliforms 18x10 +20 all around.

__________________

MagneticZ

Looks great. Did you have to run hubcentric rings with the ultraforms or install extended lugs?

I just ordered some 19" ultraforms in grey, although I'm kind of wishing I'd went with the gold after seeing your setup.

Thanks

Jmatchley86

Seeing alot of people saying they run a 10.5 in the front with no issues. I just went wider to this size in the front with a +15 offset (10.5 +15) and now i'm rubbing like crazy with a 275/40/18.

Its not in a turn but when I go over any halfway decent sized bump. I think its hitting the tab that holds the bumper in the wheel well. I already rolled the fenders and am only lowered on swift springs. Any advise here?

I ordered a quick release so I can remove the tab and am about to order some 35 aspect ratio tires. But if someone has words of wisdom i'm all ears.

Brendan

at +15 you're going to have issues. You want to be around +21 to +30 if you want run 10.5 with moderate camber