Who's making the move to STU?

Brendan · 04-03-2018, 05:10 PM

Quote:

Originally Posted by Justint5387

Right now is 900 all around, I tried it on 1100/700 and the car was miserable. It will probably change around.

What didn't you like about the first combo? I have an idea, but I would like to know your thoughts.
Also, did you run that without a front sway bar?

NLZN · 04-10-2018, 10:20 AM

FYI the z1 FUCA's are technically illegal in STU.

I ran my first event in STU trim this weekend with 285sq'd (18x10.5)
It was 35 degrees.. it's a shame being sideways eats up so much clock

Brendan · 04-10-2018, 10:34 AM

Quote:

Originally Posted by NLZN

FYI the z1 FUCA's are technically illegal in STU.

why?

NLZN · 04-16-2018, 02:03 PM

Quote:

Originally Posted by Brendan

why?

Balljoint metal content is different than stock.
It'd take a true asshat to protest over something like that -- but it's something to be aware of.

gomer_110 · 04-10-2018, 12:24 PM

Quote:

Originally Posted by NLZN

FYI the z1 FUCA's are technically illegal in STU.

Confused about this too. Only possible illegal aspect I could see is if the metal to non-metal content is off versus the factory FUCA. If someone protests you for that with these particular arms they deserve to be ridiculed by everyone around.

Justint5387 · 04-04-2018, 12:50 PM

It was too pushy, I had the Eibach bar already.

Justint5387 · 04-11-2018, 04:33 PM

896lb/in is 16kg/mm. Swift offers that.

Eibach and Hypercoil has 1000lbs

Is that what you were asking?

Brendan · 04-27-2018, 08:12 AM

lets talk coilovers for a minute. I want to go with something in the $1500-2500 range. I want the dampers to be able to be serviced in the states. I know I can get this from Fortune with their 510 series. I also know that the mcs single adjustable are around this range. Looking for thought and feed back on other options to consider.

I trust the guys who actually use their cars over the opinions in the general suspension section.

nismosis · 04-27-2018, 08:46 AM

What systems are out there which do not change the rear to true coilover? I'm aware of KWv3, but are there others?

Quote:

Originally Posted by Brendan

lets talk coilovers for a minute. I want to go with something in the $1500-2500 range. I want the dampers to be able to be serviced in the states. I know I can get this from Fortune with their 510 series. I also know that the mcs single adjustable are around this range. Looking for thought and feed back on other options to consider.

I trust the guys who actually use their cars over the opinions in the general suspension section.

Brendan · 04-30-2018, 07:48 AM

Quote:

Originally Posted by nismosis

What systems are out there which do not change the rear to true coilover? I'm aware of KWv3, but are there others?

Many of the good ones do not. AST, KW, Ohlins, MCS, MCA, Fortune, Penseke. Also like Gomer mentioned, if a company makes a good damper but it's a true type, you can always order up a set of rear perches to mount in the stock location.

gomer_110 · 04-27-2018, 09:05 PM

You don't have to get the springs from the people you get your dampers from. So long as the dampers are valved correctly for the spring rate you will be using that's what matters.

I have AST dampers and when ordered I just told them to supply springs to the specs I gave them (diameter, free length, and rate). I'll probably be picking up more springs in the near future to test some alternate spring rates.

Justint5387 · 04-30-2018, 10:21 AM

You can talk to ProParts for some 28 or 30 series Konis

Brendan · 05-01-2018, 08:34 AM

Quote:

Originally Posted by Justint5387

You can talk to ProParts for some 28 or 30 series Konis

looks like they have a kit fot the 350. wouldnt be too hard to have them do the same for the 370

Justint5387 · 05-29-2018, 12:28 PM

Improved by 0.7 after some changes but no video

Brendan · 05-30-2018, 08:34 AM

I reached out to Jeff Wong at Proparts. They can rebuild Megans for me but I did not specifically ask about Konis. I wouldn't rule it out, but I was surprised it wasn't the first option recommended.

04-04-2018, 12:50 PM	#6 (permalink)
Justint5387 Base Member Join Date: Aug 2014 Location: Bay Area, CA Posts: 188 Drives: 2016 370z Silver 6MT Rep Power: 12	It was too pushy, I had the Eibach bar already. Brendan likes this.

04-27-2018, 08:12 AM	#8 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 646 Drives: Poor man's Porsche Rep Power: 542	lets talk coilovers for a minute. I want to go with something in the $1500-2500 range. I want the dampers to be able to be serviced in the states. I know I can get this from Fortune with their 510 series. I also know that the mcs single adjustable are around this range. Looking for thought and feed back on other options to consider. I trust the guys who actually use their cars over the opinions in the general suspension section. Last edited by Brendan; 04-27-2018 at 08:18 AM.

04-27-2018, 09:05 PM	#11 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	You don't have to get the springs from the people you get your dampers from. So long as the dampers are valved correctly for the spring rate you will be using that's what matters. I have AST dampers and when ordered I just told them to supply springs to the specs I gave them (diameter, free length, and rate). I'll probably be picking up more springs in the near future to test some alternate spring rates. Brendan likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

04-30-2018, 10:21 AM	#12 (permalink)
Justint5387 Base Member Join Date: Aug 2014 Location: Bay Area, CA Posts: 188 Drives: 2016 370z Silver 6MT Rep Power: 12	You can talk to ProParts for some 28 or 30 series Konis Brendan likes this.

05-29-2018, 12:28 PM	#14 (permalink)
Justint5387 Base Member Join Date: Aug 2014 Location: Bay Area, CA Posts: 188 Drives: 2016 370z Silver 6MT Rep Power: 12	Improved by 0.7 after some changes but no video Brendan likes this. Last edited by Justint5387; 05-31-2018 at 01:29 AM.

04-10-2018, 10:20 AM	#2 (permalink)
NLZN Base Member Join Date: Dec 2017 Location: Kentucky Posts: 53 Drives: 09 370z Sport Rep Power: 8	FYI the z1 FUCA's are technically illegal in STU. I ran my first event in STU trim this weekend with 285sq'd (18x10.5) It was 35 degrees.. it's a shame being sideways eats up so much clock

04-11-2018, 04:33 PM	#7 (permalink)
Justint5387 Base Member Join Date: Aug 2014 Location: Bay Area, CA Posts: 188 Drives: 2016 370z Silver 6MT Rep Power: 12	896lb/in is 16kg/mm. Swift offers that. Eibach and Hypercoil has 1000lbs Is that what you were asking?

05-30-2018, 08:34 AM	#15 (permalink)
Brendan Track Member Join Date: Apr 2013 Location: Colorado Posts: 646 Drives: Poor man's Porsche Rep Power: 542	I reached out to Jeff Wong at Proparts. They can rebuild Megans for me but I did not specifically ask about Konis. I wouldn't rule it out, but I was surprised it wasn't the first option recommended.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Making a Big Move.	Tim.c	Nissan 370Z General Discussions	18	08-05-2015 06:07 AM
maybe a stupid move?	dhkim5599	Nissan 370Z General Discussions	28	05-23-2011 09:56 PM
Move your car !!!	John Bradley	Nissan 370Z General Discussions	30	10-31-2010 11:25 PM
Your Most Ridiculous OCD Move	OldGuy	Nissan 370Z General Discussions	45	03-06-2010 05:28 PM