![]() |
To do List.
Im going to try and get into some road racing this year pending how much much cash flow i can produce ($700 million lotto) . Sebring and homestead mainly.
If we can, lets keep it practical lol, I don't have Forced induction money.Brake ducting, brake pads ( thinking C.tech brakes on stock rotors 10/8.) CJM road race pump, Exedy cermetallic stage 2 clutch with z1 csc. I already have motul diff, PS, Tranny, 5.1 brake fluid. Feel free to chime in. I know i could do without the clutch and csc upgrade, but i don't want to be calling a tow truck home. Current set up is, 34 row oil cooler, long tubes,cbe, intakes and a tune. |
Take a look at this post for a summary of what you'll want to do as you start getting onto the track.
Don't bother with the clutch or CSC at first. Eventually you will want to add an insulated clutch line and/or replace the CSC entirely (see z1motorsport's CSC removal kit), but this is not going to be an issue at first so long as you have high quality fluid. Even if you do boil the clutch fluid, you can always pump the clutch pedal back up, so you won't be stranded. Carbotech brake pads will work well, though I recommend upgrading the fluid in both the brakes and the clutch to at least Motul RBF 600, but ideally Castrol SRF. With RBF 600, you'll have to bleed it on a regular basis, whereas SRF can be left in and basically forgotten for an entire season. With 5.1, you might boil it. Next you'll want to upgrade your tires. It's great that you already have the oil cooler, that's going to keep you out on the track and save you from a big headache with limp mode! |
The min is Motul 600 brake fluid. Wrap insulation around your clutch line down by the header. Good tires. Brake cooling ducts. About $300 from Stillen. If you can, a RRP from phunk. 10/8 brake pads. and Enjoy yourself. :driving: :D
|
Don't forget the race helmet among your recommendation Rusty.:tup::driving:
|
:iagree: Tires, brake pads, and Motul 600 or better in brakes and clutch. Go ahead and wrap the clutch line with some insulation while your under there. Top off your gas tank after 1-2 sessions. Forced Induction would not be your friend on the twisties.
|
One thing many people seem to put off, that I have always felt helps a good amount on track are some nice seats and harness's, as it helps you relax. When you are not fighting with the car to stay planted in your seat you can focus on what the car is doing much easier.
|
1 Attachment(s)
Quote:
GT5 Touring |
Quote:
Sent from my SM-N910P using Tapatalk |
Quote:
|
Thanks everyone for the input
|
Quote:
|
Quote:
|
Quote:
Invest on protecting yourself first. |
Quote:
Here's a helpful thread for when you decide to tackle your safety system: HPDE safety gear flow chart, comment please !! |
Will agree on the safety thing, I am in the middle of it right now. You can't just "install a harness/rollbar" and kablam you are safe. Many many of the "safety" setups I see are not safe at all. They would be much better off just sticking with OEM 3-point and air bags. Modern cars are very safe. Much more-so than some of the dumb-sh1t things I see like 4 point harnesses, harness but no hans, etc. It is very expensive to do a real safety upgrade on a street car, figure your seats(400-1000 each), hans (400), 4 or 6 point cage(3+ grand if its done right), the actual harnesses(2-300),helmet(4-600), and they all need to be done at the same time. Otherwise probably just best buying a good helmet and sticking with air bags.
|
All times are GMT -5. The time now is 08:25 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2