Buttonwillow - 8/22 - 8/23

ban25

Just spent a weekend down at Buttonwillow at an event run by SpeedDistrict. It was a fantastic event and we had tons of track time. Here are some photos from this weekend -- I'm currently editing video and will post that up later:









Cheers!

__________________
2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport

osbornsm

Great shots!

Any lap times?!

And also, i'm bored at work, so i photoshopped one of your pics...

ENJOY !!

__________________

GZ3

I cant even type!@ hahahah


OP how did those potenzas hold up at the track? Im looking at s0-4 pole positions and possible these,,,maybe re-11's

__________________
09 GT-R
12' 370Z 7AT HANDED DOWN
12'+13' 5.0 SOLD

ban25

Potenza's held up quite well, I can take some photos of them later. The long sweepers at BW can be brutal on the fronts, my buddy had severe wear on his fronts (18" 275) after 90 laps. He'll be rotating those, lol. I only got in 40 laps due to missing several sessions on Sunday and fighting constant limp mode, boiled clutch fluid, and fuel cut.

__________________
2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport

ban25

Haha, nice photoshop

Lap times were not great due to the aforementioned mechanical issues, namely limp mode after the first lap, and a dead clutch pedal by the third. All things considered, I managed 2'32" as best for the weekend. Here's a video:

http://youtu.be/4dlacRLQMIo

My buddy did 2'07" in an M3. The good news is I should have these problems solved before my next track day -- new oil cooler, clutch, lines, and fluids all going in over the next two weeks.

__________________
2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport

Brendan

Those are some really beautiful shots.

NORAIN

OP how did those potenzas hold up at the track? Im looking at s0-4 pole positions and possible these,,,maybe re-11's[/QUOTE]

S-04's are not the best for the track. I had a set, grip isn't too bad, actually great in the wet. But they heat up and melt off pretty easy. I just got RE-11's and will track them next week for the first time.

__________________
Swift Springs|265-305 RE-11|Forgestar F14|F.I. TDX S.S. 12" Res."Milled Out"|K&N|SPL|Z1(34 row)oil cooler|Z1 brake upgrade|Hotchkis Zspeed|Team Voodoo|HPDEjunkie.com

GZ3

S-04's are not the best for the track. I had a set, grip isn't too bad, actually great in the wet. But they heat up and melt off pretty easy. I just got RE-11's and will track them next week for the first time.[/QUOTE]

Awesome, please report how they held up. I will hold off on purchase after some good feedback

__________________
09 GT-R
12' 370Z 7AT HANDED DOWN
12'+13' 5.0 SOLD

GZ3

What oil cooler are you going with? Unless that z1 is recent added to sig....motul fluids have always performed stellar for me

__________________
09 GT-R
12' 370Z 7AT HANDED DOWN
12'+13' 5.0 SOLD

osbornsm

Answers in your order:

1. Limp mode
- Do you have winter?
+ If yes, get a 25-row oil cooler kit from Z1 Motorsports w/themostatic plate
+ If no, get the 34-row kit from Z1 Motorsports w/themostatic plate

2. Boiled clutch fluid
- Make sure this was not a CSC failure
- Clutch and Brake fluid should be NOTHING else than Motul RBF600.

3. Fuel cut
- If this is a ginormous issue for you, there is a kit available for about, what... $2k? that'll fix this for you.

__________________

osbornsm

P.S. Read my other thread about Track Day best practices.

ban25

Way ahead of you, but thanks for the advice

I've been sitting on the following for a few weeks waiting to get into a shop for installation -- every place has been booked, but I finally was able to make an appointment for early September:

Z1 Motorsports 34-row Setrab Oil Cooler /w Thermostatic Plate
ZSpeed Insulated Clutch Hose
ZSpeed HD CSC & OEM CMC
Southbend Stage 3 Clutch & Lightweight Flywheel

For fluids, I'm already using Motul RBF600, but I am seriously considering going up to Castrol SRF. FWIW, the CSC is fine, I'm just replacing it as a precaution, especially since the clutch is getting changed out anyway.

As for fuel cut, I'm not doing anything about that this round. If I can drive down a straight without having to pump the clutch, I'll be happy enough already. I'm considering a solution like phunk's RRP, probably in early spring. Until then, I'll just try to keep it topped off.

__________________
2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport

ban25

I didn't realize that was in my sig...yeah, that's the one I bought, but it's still sitting in the box at the moment. Install coming soon.

__________________
2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport

ban25

This is an excellent track guide! It's what I used when deciding on which cooler to buy.

Thanks!

__________________
2017 Corvette Z06 7MT | 1LE | Stage 3 | DSCSport

GZ3

ahhhhh OK! makes sense now...i was wondering what kinda track duty you were pulling that the z1 oil cooler was not handling....

__________________
09 GT-R
12' 370Z 7AT HANDED DOWN
12'+13' 5.0 SOLD