370Z Carbon parts and an Introduction

GaleForce · 07-23-2015, 08:47 PM

Quote:

Originally Posted by JARblue

Someone needs to make a heavy duty clutch master cylinder. I took care of the slave, but I'm about to be on my third master

A better clutch master cylinder would be great.

For me, I would like a bolt in rollbar/cage. But shipping would probably be an issue.

I know a few guys that would like a power steering reservoir relocation kit.

Maybe bolt on support of some kind for the rear diff to prevent the diff bushings from failing?

GaleForce · 07-23-2015, 08:49 PM

Wish I thought of a VK swap while my car was in the U.S.

BuckeyeZ · 07-23-2015, 09:07 PM

Quote:

Originally Posted by Masterbeatty

......... and a functional front splitter........

+1 on a decent front splitter that will stand-up to track use.

Hotrodz · 07-23-2015, 09:23 PM

I got to see Chis's ride up close and personal and the body parts are incredibly lightweight. The hood can be lifted with one hand with not much effort at all. Interested in the cost of the body parts and a functional front splitter.

derraj06 · 07-23-2015, 10:05 PM

The Sebion hoods (Chris's sponsor) are still heavier than stock without the massive hole cut into it like his has.

I'm pricing a bolt in roll bar /half cage so if you are interested in producing one I'm all ears.

Hotrodz · 07-23-2015, 10:10 PM

Quote:

Originally Posted by derraj06

The Sebion hoods (Chris's sponsor) are still heavier than stock without the massive hole cut into it like his has.

I'm pricing a bolt in roll bar /half cage so if you are interested in producing one I'm all ears.

The hood he is holding may be made by Sebion but it's not the one you and I can purchase. The Nismo next to him is a Sebion and they are not even close on weight.

JARblue · 07-24-2015, 09:38 AM

Quote:

Originally Posted by GaleForce

I know a few guys that would like a power steering reservoir relocation kit.

And for those that don't need a relocation kit, perhaps an aftermarket reservoir that bolts into the factory location with minimal effort needed could be done. I don't mind if the hoses need to be moved around as long as it easily bolts to the car either via the original factory bracket or a custom one for the new reservoir. It would be nice if it were available in a variety of finishes/colors; I would prefer a black chrome finish to match my intakes.

Meulen · 07-24-2015, 09:54 AM

Bolt-ons!!! SOMEBODY needs to figure out those intakes and get a 400hp NA done!!! Especially now that Ecutek has unlocked VVEL

imjello · 07-24-2015, 11:19 AM

Quote:

Originally Posted by derraj06

I'm pricing a bolt in roll bar /half cage so if you are interested in producing one I'm all ears.

bolt in half cage, yes please. Four point, strut bars to b pillar, for the rear could be cool also

i dont think there is many companies that make replacements for the rear chassis bar either

MAMotorsports · 07-24-2015, 12:45 PM

Quote:

Originally Posted by FPenvy

VK swap you say........

Quote:

Originally Posted by Carbon_z

been following you guys for a while, great work!

Awesome! Love to hear that. Thanks for the support.

Quote:

Originally Posted by Masterbeatty

Shoot. If I had more money laying around I would give you my car in oct to be revield in the spring since she hibernates. Maybe next time i deploy I can give you my car for 6 months.

Would love to work with you man, let me know if you have any questions on stuff.

FPenvy · 07-24-2015, 01:46 PM

wonder what the cost of the VK swap would be. slightly used newer year VK's go for 2-3K

lots of fab isn't gonna be cheap I know that lol

Rusty · 07-24-2015, 05:52 PM

1. Bolt on front splitter for '11 Nismo front bumper.
2. Winglets for the '11 Nismo front bumper.
3. Wet sump oil system that bypasses the stock pump.
4. Bolt it 4 point roll bar that sits far enough back that won't interfere with seat adjustable, and also ties in the rear upper shock mounts.
5. Rear diff oil cooler kit with pump, filter, thermostatic switch so that it comes on by itself, cooler, mounting bracket, and hoses.
6. Vents for the stock hood.
7. Wider fenders that bolt on, and blend with the stock body lines. Not the crap that's out now that looks chopped in the rear.
8. Getting a Titlon clutch master cylinder to fit.
9. Still thinking.

TerribleONE · 07-24-2015, 06:12 PM

Quote:

Originally Posted by GaleForce

A better clutch master cylinder would be great.

For me, I would like a bolt in rollbar/cage. But shipping would probably be an issue.

I know a few guys that would like a power steering reservoir relocation kit.

Maybe bolt on support of some kind for the rear diff to prevent the diff bushings from failing?

This!!!

KngScottieV · 07-24-2015, 08:57 PM

Quote:

Originally Posted by MAMotorsports

Something about seeing a Z all naked like that makes me feel funny... ya know... down there.

Spec Jay · 07-24-2015, 10:58 PM

Definitely a functional front splitter(chassis mounted preferably) and rear diffuser!

07-23-2015, 08:49 PM	#17 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51865	Wish I thought of a VK swap while my car was in the U.S. JARblue likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

07-24-2015, 09:54 AM	#23 (permalink)
Meulen A True Z Fanatic Join Date: Aug 2013 Location: Romeoville, IL Posts: 1,093 Drives: 2010 370z 40th Rep Power: 3390	Bolt-ons!!! SOMEBODY needs to figure out those intakes and get a 400hp NA done!!! Especially now that Ecutek has unlocked VVEL __________________ Follow my build thread here: Meulens Build Journal

07-24-2015, 05:52 PM	#27 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,220 Drives: 2011 Nismo GM 6M Rep Power: 2684438	1. Bolt on front splitter for '11 Nismo front bumper. 2. Winglets for the '11 Nismo front bumper. 3. Wet sump oil system that bypasses the stock pump. 4. Bolt it 4 point roll bar that sits far enough back that won't interfere with seat adjustable, and also ties in the rear upper shock mounts. 5. Rear diff oil cooler kit with pump, filter, thermostatic switch so that it comes on by itself, cooler, mounting bracket, and hoses. 6. Vents for the stock hood. 7. Wider fenders that bolt on, and blend with the stock body lines. Not the crap that's out now that looks chopped in the rear. 8. Getting a Titlon clutch master cylinder to fit. 9. Still thinking. Hotrodz and kukpet like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 07-24-2015 at 05:55 PM.

07-24-2015, 10:58 PM	#30 (permalink)
Spec Jay A True Z Fanatic Join Date: Apr 2009 Location: Bummerton Posts: 1,510 Drives: MtB 09 370z Rep Power: 19	Definitely a functional front splitter(chassis mounted preferably) and rear diffuser! abm89 likes this. __________________ 09 Monterey Blue Global Time Attack Street Class Build Build Thread:Saber! Instagram:@SpecJay

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: 370z seibon /evo r carbon fiber parts	outkazt	Northern California Region	3	06-25-2015 09:18 PM
EVO-R 370Z Dry Carbon Interior parts	EVOR	Exterior & Interior	17	08-29-2012 08:10 PM
09-10 Nissan 370Z Seibon Carbon Fiber Parts	ERZperformance	Body Interior/Exterior	1	06-26-2011 09:27 PM
Carbon Parts???????	NotmyGTR	Nissan 370Z General Discussions	7	05-09-2009 01:42 PM

07-23-2015, 10:05 PM	#20 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	The Sebion hoods (Chris's sponsor) are still heavier than stock without the massive hole cut into it like his has. I'm pricing a bolt in roll bar /half cage so if you are interested in producing one I'm all ears.