Ichiba and H&R Spacers-Lowest Prices!!!

FBNISSAN · 12-14-2011, 10:26 AM

Send me a PM for your order.

Sample Picture:

ICHIBA Version I wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers come with extended wheel studs. These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

ICHIBA Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers are two pieces design with pressed studs. Now it's time to bolt-on without any swap studs hassles. These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

Picture:

- Go wide with TRAK+ Wheel Spacers
- Hubcentric, precision engineered, unrivaled fit and finish
- Hard anodized aluminum / magnesium alloy for high strength
- Widths from 5mm to 65mm available for perfect spacing
- Lower vehicle roll center and widen track for improved handling and safety

If you've ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel/ tire combo that just barely tucked under the wheel wells, chances are that car was fitted with H&R TRAK+ wheel spacers. TRAK+ wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you've been looking for.

TRAK+ wheel spacers are made from a proprietary aluminum/magnesium alloy which is not only incredibly strong, but also very light weight (up to 70% lighter than a comparable steel product). TRAK+ wheel spacers are then hard anodized to ensure a tough, durable finish that is resistant to chipping, scratching and oxidation. Hub centric for the highest level of accuracy, TRAK+ wheel spacers are 100% made in Germany under ISO 9001 Quality Assurance standards, and meet the rigid safety criteria of the German TÜV.

DRS® Series
DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included).

DRM® Series
DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs.

Whether you want improved handling, increased safety or simply want your car to make a statement about your individual style,TRAK+ wheel spacers can help you accomplish your goal.

FBNISSAN · 12-15-2011, 10:31 AM

now shipping........

FBNISSAN · 12-16-2011, 09:30 AM

super deals.......

FBNISSAN · 12-29-2011, 09:38 AM

Super deals......

FBNISSAN · 01-03-2012, 11:05 AM

Great prices.....

FBNISSAN · 01-04-2012, 01:32 PM

Great prices.......

FBNISSAN · 01-06-2012, 01:09 PM

great prices........

RoshDawg · 01-07-2012, 05:01 AM

Pm for a set of 20/20 for the H&R DSR spacers to 92126? Thanks!

FBNISSAN · 01-10-2012, 10:43 AM

Pm sent.....

Flaguy · 01-10-2012, 12:20 PM

Will (DRM 15mm) or versionII (15mm) fit on the front?

If so, can i get a price shipped to 31005

DRM 15 (Front)
DRM 20 (Rear)

AND

Version II (15mm) Front
Version II (20mm) Rear

FBNISSAN · 01-11-2012, 01:12 PM

Great prices......

FBNISSAN · 01-12-2012, 01:21 PM

super deals......

tonybui · 01-12-2012, 03:00 PM

DRS H&R 15mm and 20mm shipped to 21045 plz. Thanks

FBNISSAN · 01-16-2012, 10:44 AM

Pm sent......

tu_clean · 01-18-2012, 02:50 AM

Price for ichiba version 2 and h&r drm 20mm shipped to 94544

12-14-2011, 10:26 AM	#1 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	Ichiba and H&R Spacers-Lowest Prices!!! Send me a PM for your order. Sample Picture: ICHIBA Version I wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers come with extended wheel studs. These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety. ICHIBA Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Each wheel spacers are two pieces design with pressed studs. Now it's time to bolt-on without any swap studs hassles. These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety. Picture: - Go wide with TRAK+ Wheel Spacers - Hubcentric, precision engineered, unrivaled fit and finish - Hard anodized aluminum / magnesium alloy for high strength - Widths from 5mm to 65mm available for perfect spacing - Lower vehicle roll center and widen track for improved handling and safety If you've ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel/ tire combo that just barely tucked under the wheel wells, chances are that car was fitted with H&R TRAK+ wheel spacers. TRAK+ wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling, greater safety and of course, the sleek style you've been looking for. TRAK+ wheel spacers are made from a proprietary aluminum/magnesium alloy which is not only incredibly strong, but also very light weight (up to 70% lighter than a comparable steel product). TRAK+ wheel spacers are then hard anodized to ensure a tough, durable finish that is resistant to chipping, scratching and oxidation. Hub centric for the highest level of accuracy, TRAK+ wheel spacers are 100% made in Germany under ISO 9001 Quality Assurance standards, and meet the rigid safety criteria of the German TÜV. DRS® Series DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included). DRM® Series DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included). Wheel is bolted to new DRM wheel studs. Whether you want improved handling, increased safety or simply want your car to make a statement about your individual style,TRAK+ wheel spacers can help you accomplish your goal. __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer Last edited by FBNISSAN; 10-22-2015 at 01:34 PM.

12-15-2011, 10:31 AM	#2 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	now shipping........ __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

12-16-2011, 09:30 AM	#3 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	super deals....... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

12-29-2011, 09:38 AM	#4 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	Super deals...... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-03-2012, 11:05 AM	#5 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	Great prices..... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-04-2012, 01:32 PM	#6 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	Great prices....... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-06-2012, 01:09 PM	#7 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	great prices........ __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-07-2012, 05:01 AM	#8 (permalink)
RoshDawg Track Member Join Date: May 2011 Location: NM / CA Posts: 981 Drives: '13 911 C2S Rep Power: 15	Pm for a set of 20/20 for the H&R DSR spacers to 92126? Thanks! __________________ \| EVO X MR \| '11 WRX STI \| 370Z SPRT \| 911 (991) C2S \|

01-10-2012, 10:43 AM	#9 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	Pm sent..... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-10-2012, 12:20 PM	#10 (permalink)
Flaguy Base Member Join Date: Jan 2012 Location: Bonaire, Ga Posts: 53 Drives: 09 MB Nismo Rep Power: 13	Will (DRM 15mm) or versionII (15mm) fit on the front? If so, can i get a price shipped to 31005 DRM 15 (Front) DRM 20 (Rear) AND Version II (15mm) Front Version II (20mm) Rear Last edited by Flaguy; 01-10-2012 at 12:24 PM.

01-11-2012, 01:12 PM	#11 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	Great prices...... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-12-2012, 01:21 PM	#12 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	super deals...... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-12-2012, 03:00 PM	#13 (permalink)
tonybui A True Z Fanatic Join Date: May 2009 Location: Maryland Posts: 1,397 Drives: 09 Sports 6 Speed Rep Power: 427	DRS H&R 15mm and 20mm shipped to 21045 plz. Thanks

01-16-2012, 10:44 AM	#14 (permalink)
FBNISSAN A True Z Fanatic Join Date: Dec 2010 Location: PENNSYLVANIA Posts: 8,383 Drives: THE BUS Rep Power: 31	Pm sent...... __________________ Email:jmeer@fredbeans.com Website:fredbeansparts.com Phone:877-872-6606(EXT#1115) AIM:FBPJomer

01-18-2012, 02:50 AM	#15 (permalink)
tu_clean Track Member Join Date: Dec 2008 Location: Norcal Posts: 527 Drives: 10' Nismo 370z Rep Power: 18	Price for ichiba version 2 and h&r drm 20mm shipped to 94544

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
~~ Brand New Nismo Shift Knobs SALE Lowest Prices >>>>	Mike@Czp	Body Interior/Exterior	447	03-06-2017 01:03 PM
Red Line and Ester Oil Lowest Prices!!!	FBNISSAN	Drivetrain/Engine	546	12-01-2015 01:15 PM
SPC Camber Kit l Lowest Prices l The Leader l THMotorsports	THMotorsports	Suspension/Brakes	330	12-27-2010 11:12 AM