cool, i'll be there then

Mmm... donuts.

http://thechive.files.wordpress.com/...s_drifting.gif

Know what I was just thinking about that video of the 370... Unlike every Corvette owner the Z was able to make a mistake look good. LOL!!!

I can watch that kid having fun forever!

what car meet was that in the video?

others talking about c&c here
http://www.facebook.com/groups/HoustonZCars/

would like to meet the fellow z fam but i gots drill this weekend :/

maybe feb meet...

Looks like rain Saturday too... Hope it doesn't.

ill see y'all tomorrow at c&c

Can't make it to any meets cause of work. Hopefully sometime a few months from now.. Hopefully by June.

By the way anybody know where I can get this fixed?

Attachment 60552
Attachment 60553

Past couple of weeks I've only been using the Z to go to church so I have no clue when/where I got it from.. So sad!!

Might wanna try Richey Collision.

The donuts have been dropped..I repeat, the donuts have been dropped (not on the floor, as in dropped off for the slow people)

Sorry couldnt stick around..fiance is sick AND on her period....its been the best week ever!:shakes head:, leave for work in a hour and it was balls cold with rain. Good enough potion to drop the package and jet lol

Will check it out! Thanks!

Anyone know a reputable place that can build a performance motor here in Houston? I think I would like to build a NA motor that puts down about 450whp. Is this feasible and still be streetable?

Thanks

I wouldn't want to go down that road with the VQ. There's a couple of extensive threads here about that, but let's just say *if* it's even possible to reach 400+ whp on an NA 3.7, it would require a ton of time and money (basically replace virtually everything in the engine with aftermarket stuff, brand new heads from another engine, different exhaust cams, probably ditch VVEL and thus switch ECUs as well, etc... and then develop a few new parts). You're going against the nature of the engine going that route, and it'll fight you every step of the way. It's a losing battle.

It would be far cheaper (and much more turnkey) to do an SC or TT build targeting 450rwhp (rather than trying to shoot for 5-600, which is probably what ends up destroying some of them).

Or if you're really stuck on NA and you're willing to toss the ECU and stock dash (which again, a crazy VQ37 build would probably end up requiring anyways due to head changes), you'd get more power for far less money by doing an LSx conversion. It's been done before on the 350's, but I haven't seen a completed 370 yet. If (really, when) my engine dies from track use, I'm likely to explore that route myself, but we'll see when the time comes. If you're set on Nissan loyalty, a similar option would be to throw in the VK56DE.

Thanks for the quick and informative reply. I currently have 2 SC Mopars and was thinking it might be nice to build an NA but had suspicions that it might be expensive. Not knowing the Nissan perfromance capabilities of the 2009 370Z, I thought I would ask the question and appreciate your feedback. Looks like I might end up with a 3rd SC car!! LOL

I have done a lot of reading on the FI section but had not seen much on the NA builds other than bold-ons and tunes which would not yield the end point I desired. Again, thanks for the reply.

Yeah it all depends on what you want to do with the car. Bang for the buck and reliability/ease, I'd say If you're after max peak HP and maybe some drag racing do the GTM TT kit. How much power is really down to how much wallet, and 600 should be possible without going way too far. If you're doing a road-race car where you expect to sustain high RPMs for long periods, maybe do the GTM SC kit and tune it conservatively (larger pulley, etc) to keep it reliable at ~400-450rwhp.

Chris Forseberg is running a Titan V8 engine in his 370 and making that much power. Might want to look into that.

Thought his was a Nismo racing engine (not based off of any production v8) from a Baja truck or something? Pretty sure that's what I had read. It's pretty boss, either way.

as of sept, still nissan racing titan engine.

Under the hood, Nissan's VQ37 motor has been ditched in favor of the torque from a V8. Forsberg and his team have decided to stick with the VK56-based Nissan Motorsports 5.6L V8 racing motor that's powered his cars for the past several years. This year's motor, however, runs individual throttle bodies protected by an AEM carbon fiber air box and custom MA Motorsports 4-2-1 long tube headers that expel the fumes to a custom dual 3.5-inch exhaust. An electric water pump and Mishimoto race-spec dual radiator keep things cool while Electromotive ECU and coils take care of the spark
PASMAG | PERFORMANCE AUTO AND SOUND - The Contender: Chris Forsberg's 2012 Nissan 370Z

Ah, guess it is VK based.

Calling it a Titan engine is kinda silly tho :P

So how much are these so called race engines??

Info from the Wik:
The VK56DE is a 5.6 L (5552 cc) version built in Decherd, TN. Bore is 98 mm (3.9 in) and stroke is 92 mm (3.6 in). Output is 317 hp - 320 hp (227 kW) at 4900 rpm with 385 to 393 lb·ft (522-533 Nm) of torque at 3600 rpm. It has aluminum-alloy block and heads and low-friction molybdenum-coated pistons. The valvetrain is a dual overhead cam (DOHC) design with a continuously variable valve timing control system (CVTCS) on the intake valves. It also has 4 valves per cylinder with micro-finished camshafts and ductile iron cylinder liners for increased durability.
Motorsport
Nismo also uses the VK56DE for FIA GT1 racing. In race trim, it produces 600 horsepower and 479 pound-feet of torque.[5]
The Nissan Motorsport VK56DE was launched in Australia for the V8 Supercars Championship in 2013 by Kelly Racing in Melbourne. The engine has been reduced in capacity to 4,990cc to fit the V8 Supercars regulations. It has a bore and stroke of 102.69mm x 75.31mm. It will be fitted to a Nissan Altima version of the V8 Supercars "Car of the Future" specification that will compete from 2013 onwards.[6]
Applications:
2004–present Nissan Armada, 317 hp (236 kW) and 385 lb·ft (522 N·m)
2004–present Nissan Titan, 317 hp (236 kW) and 385 lb·ft (522 N·m)
2004–2010 Infiniti QX56, 320 hp (240 kW) and 393 lb·ft (533 N·m)
2010–present Nissan Patrol, 320 hp (240 kW) and 393 lb·ft (533 N·m)
2008–2012 Nissan Pathfinder, 310 hp (230 kW) and 388 lb·ft (526 N·m)
2012–present Nissan NV2500 HD, 317 hp (236 kW) and 385 lb·ft (522 N·m)
2012–present Nissan NV3500 HD, 317 hp (236 kW) and 385 lb·ft (522 N·m)
2012–present Nissan NV Passenger, 317 hp (236 kW) and 385 lb·ft (522 N·m)
2009–present Nissan GT-R GT1, 600 hp (450 kW) and 479 lb·ft (649 N·m)
2013-onwards Nissan Altima, V8 Supercars Australia, 650 hp (480 kW)
Notes:
The Titan, Armada, and Pathfinder power figures are for regular 87 octane fuel. The 320 hp (240 kW) Infiniti QX56 is tuned more for premium (91+ octane) fuel.
Some VK56DE powered vehicles are E85 capable.

The thing is a race engine.

It isn't a Titan motor.

It has individual throttlebodies in a huge intake plenum, race heads and cams.

It's nearly 600hp all motor, not a Titan motor.

http://www.chrisforsberg.com/wp-cont...e-2011003s.jpg

http://www.chrisforsberg.com/wp-cont...e-2011006s.jpg


That's the only point I was trying to make.

Later.

I understand that its modified, not trying to be a **** just was posting some more info on it. Sorry I called it a Titan motor, no need to get butt hurt.

Man, I really don't know what intake to get with Houston weather. All the rain is killin it for me

Eh. We had all those flash flood warnings but it wasn't anything bad tbh.

So should I say stew it and get the stillen g3 intake the way to go?

I plan on getting the Stillen Gen3 for my G37. I don't foresee any problems with it.

Stillen g3 ftw!

Yes, I ran the gen3 for almost a year with very very bad rain storms here in Houston and not a single problem. The good thing about the stillen is they are still high up like the OEM filter and still behind the front bumper protected. You would need to drive through 3 feet of static water to flood them which means the inside will be wet before the intakes.

Hey, all! I just posted in the sticky thread for the Houston Z Club or whatever but it looks like this is where life is! Anyone want to help me out with info on where/when the next meet will be? I'd love to make it out! Thank you in advance.

This is the page for meets:
http://www.the370z.com/texas/52170-h...g-meet-59.html

Also look up Houston Z Cars on Facebook ;)

http://www.facebook.com/groups/HoustonZCars/
houston z's

Wish we could change that name. That word Cars really gets under my skin. :shakes head:

What happened to the shirts? I deleted my Facebook and I ordered 2 lol.

What do we have? We have car.

I'm home!!!! Landed around 5pm last night. Very long trip! The flight from Dubai to IAH was 16+hrs. None-the-less... Have some things to take care around the house and hopefully getting my Z tomorrow or this weekend.

Some old pics from back in 2009 sometime, of driving with my Gen3's in a horrible rainstorm in Houston that was causing flooding all over the city. I've never had water problems with them:

http://www.the370z.com/members/wstar...2280-rain3.jpg
http://www.the370z.com/members/wstar...2279-rain2.jpg

I remember that day, horrible day to drive the Z.

LAY-LOW HOOKAH MEET HOSTED BY TEAM BOTTOMOUT!!!

We are starting a monthly meet which will have every 4th Monday of each month.

This place is located off Westheimer n Hayes RD. (Right after Wilcrest)


They have the best natural flavors of tobacco , Egyptian Hallal Grill, fresh juice bar, teas, turkish coffee,you can even BYOB.

Come out and join us to a relaxing evening.

Smoke best Hookah in town and enjoy the Houston car scene.

This meet will be from 7pm to 11pm.

Pharaohs Hookah Cafe.
11312 Westheimer Road, Houston, Texas.

See you guys there!

Next meet is on Jan 28, 2013!!!