Time For More BOOST!!!

O&G · 01-17-2012, 07:07 PM

I think that's why the boys over @ GTM placed those tiny METH nozels slightly ahead of the MAFS on one of their builds. Kinda trick the ECU into keeping the desired timing. I think I'm going to try a similar setup.

Robert_K · 01-25-2012, 04:27 AM

So apparently the Greddy Racing Ti-C exhaust is discontinued as well. So I've opted for the Greddy RS exhaust. Same 70mm piping and looks like same canisters. Only different is the exhaust tips are not burnt titanium. Which, to be honest, I prefer.

Robert_K · 01-28-2012, 10:18 PM

Talked to PowerFab yesterday. Was told the following was ordered and the engine would be pulled this week.

~ Greddy Exhaust
~ Carbonetic clutch & flywheel
~ Quaife diff
~ CJM fuel return w/ rails
~ ID 1000cc injectors

O&G · 02-01-2012, 04:39 PM

Quote:

Originally Posted by Robert_K

~ CJM fuel return w/ rails
~ ID 1000cc injectors

RAWR, great choice for the fuel system, had the same on my treefifty!! I thought you had more done to the car but obviously your covering every aspect now. Great build, looking forward to seeing the finished product! You must of had a payday!!!

Robert_K · 02-01-2012, 11:52 PM

A lot has been done. But with the engine build upgrading.

O&G · 02-01-2012, 11:59 PM

You still rocking the Cosworth Intake Manifold, I was so jelly of you forever!

Robert_K · 02-02-2012, 12:46 AM

Quote:

Originally Posted by O&G

You still rocking the Cosworth Intake Manifold, I was so jelly of you forever!

Of course!

O&G · 02-02-2012, 01:09 AM

beautiful!

Robert_K · 02-02-2012, 01:33 AM

Thanks!

Robert_K · 02-02-2012, 11:45 AM

Little update:

So the Greddy exhaust & Quaife made it in. Engine work has begun. Waiting for some pictures to be sent. I'll be ordering the following on Friday;

~ Nissan CD009 6sp transmission
~ IPP Chromoly Pivot Ball
~ Nismo Roller Bearing
~ Haltech Platinum 350Z/G35 Pro Plug-In
~ Haltech Dual Channel Wideband Controller
~ Haltech Boost Control Solenoid
~ Haltech Air Temp Sensor

O&G · 02-02-2012, 02:11 PM

Haltech or

good **** man! Wish I had a dumptruck full of cash like you!! This Z is going to be racecar! I'm jelly again damnit!!

Robert_K · 02-02-2012, 09:21 PM

Quote:

Originally Posted by O&G

Haltech or

good **** man! Wish I had a dumptruck full of cash like you!! This Z is going to be racecar! I'm jelly again damnit!!

Thanks. Go big or go home.

Robert_K · 02-02-2012, 09:58 PM

Engine swap complete!

Robert_K · 02-06-2012, 03:46 AM

Hopefully will be hearing back today on new wheels pricing and will be ordering.

Clue... ARKYM+ESS [VT2-650] Teaser - YouTube

Robert_K · 02-06-2012, 12:01 PM

More parts checked off the list!!!

Ordered today...

~ CD009 6mt Transmission
~ Chromoly Pivot Ball for CD009 trans
~ IPP SS Clutch Line
~ Nismo Roller Bearing

01-17-2012, 07:07 PM	#16 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	I think that's why the boys over @ GTM placed those tiny METH nozels slightly ahead of the MAFS on one of their builds. Kinda trick the ECU into keeping the desired timing. I think I'm going to try a similar setup. __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

01-25-2012, 04:27 AM	#17 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	So apparently the Greddy Racing Ti-C exhaust is discontinued as well. So I've opted for the Greddy RS exhaust. Same 70mm piping and looks like same canisters. Only different is the exhaust tips are not burnt titanium. Which, to be honest, I prefer. __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

01-28-2012, 10:18 PM	#18 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	Talked to PowerFab yesterday. Was told the following was ordered and the engine would be pulled this week. ~ Greddy Exhaust ~ Carbonetic clutch & flywheel ~ Quaife diff ~ CJM fuel return w/ rails ~ ID 1000cc injectors __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

02-01-2012, 11:52 PM	#20 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	A lot has been done. But with the engine build upgrading. __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

02-01-2012, 11:59 PM	#21 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	You still rocking the Cosworth Intake Manifold, I was so jelly of you forever! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

02-02-2012, 01:09 AM	#23 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	beautiful! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

02-02-2012, 01:33 AM	#24 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	Thanks! __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

02-02-2012, 11:45 AM	#25 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	Little update: So the Greddy exhaust & Quaife made it in. Engine work has begun. Waiting for some pictures to be sent. I'll be ordering the following on Friday; ~ Nissan CD009 6sp transmission ~ IPP Chromoly Pivot Ball ~ Nismo Roller Bearing ~ Haltech Platinum 350Z/G35 Pro Plug-In ~ Haltech Dual Channel Wideband Controller ~ Haltech Boost Control Solenoid ~ Haltech Air Temp Sensor __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

02-02-2012, 02:11 PM	#26 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 42 Posts: 1,212 Drives: 40th Anv. Rep Power: 22	Haltech or good **** man! Wish I had a dumptruck full of cash like you!! This Z is going to be racecar! I'm jelly again damnit!! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

02-02-2012, 09:58 PM	#28 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	Engine swap complete! __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

02-06-2012, 03:46 AM	#29 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	Hopefully will be hearing back today on new wheels pricing and will be ordering. Clue... ARKYM+ESS [VT2-650] Teaser - YouTube __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

02-06-2012, 12:01 PM	#30 (permalink)
Robert_K A True Z Fanatic Join Date: May 2009 Location: Spring, TX/Iraq Posts: 1,281 Drives: '12 Forgeline G37S Rep Power: 18	More parts checked off the list!!! Ordered today... ~ CD009 6mt Transmission ~ Chromoly Pivot Ball for CD009 trans ~ IPP SS Clutch Line ~ Nismo Roller Bearing __________________ '12 G37S Forgeline, '03 Built TT 350Z HRE (Sold!) http://i107.photobucket.com/albums/m...psc7a6dc53.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.08 and boost	whoLEEoh	Engine & Drivetrain	16	12-07-2015 09:08 AM
motordyne M370 + boost=???	Vnismo370z	Forced Induction	8	12-04-2011 11:37 PM
Boost controller	LafitteZ	Forced Induction	37	08-08-2011 12:51 AM
Need Mic Boost?	Osiris	Audio & Video	6	07-14-2010 04:43 PM
Upcoming HP boost for 2010?	ATC5079	Nissan 370Z General Discussions	1	03-20-2009 06:02 AM