Austin370Z E-vents

enrique_370 · 12-20-2015, 01:00 AM

Quote:

Originally Posted by Morbid370Z

Nice! Let me know what you think of the exhaust. I liked my 12" res. Now you just need headers~

Pint, JarBLUE, Enrique, you fine folks want to get food sometime on a Sat/Sun?

Just saw this. If I can wake up early sunday could work. As for the headers I think I am going turbo with my car. Since I decided to keep it I might go all out on this bad boy.

enrique_370 · 12-20-2015, 01:14 AM

Quote:

Originally Posted by enrique_370

Just getting parts placed on the car should get it back today and see how everything feels. FI 12 inch res exhaust poly motor and trans mounts. I will give feedback in a few days on the mounts hope there is not to much shaking going on

With all the items on the car for a little bit here are my thoughts. On the following items.

-Clutch Helper spring- Softens the clutch pedal at first I was worried as I felt the dead pedal as I have read before but now it prob adjusted or I have. I now can feel when the transmission grabs and it is what the car should have came with. raiting 9/10

- z1 poly Trans/Mounts- At first just like the CHS there seemed to be a good amount of vibration maybe it was the parts getting settled in or myself needed to be adjusted to it. The car does grab a lot better. No longer shifting from 6th to 4th is a guessing game and hope it can hit right. The shifter is precise and feels great now. I can feel a little more vibration on deceleration when the car gets a little warm (200 degrees or so) and when I am around 2500 rmp. trans raiting 10/10 love this mod. Engine 8/10.

Exhaust/Z1 post maf tubes- I do love the sound of this combo but I am starting to see worse mpgs than before prob need a tune now. But it does burble a bit. Raiting 9/10

The mod bug has me bad now

. Looking into getting either AAM turbo or Fast intentions. Need to do more research on the difference on the two and where to get everything done

Morbid370Z · 12-22-2015, 06:52 AM

Quote:

Originally Posted by enrique_370

With all the items on the car for a little bit here are my thoughts. On the following items.

-Clutch Helper spring- Softens the clutch pedal at first I was worried as I felt the dead pedal as I have read before but now it prob adjusted or I have. I now can feel when the transmission grabs and it is what the car should have came with. raiting 9/10

- z1 poly Trans/Mounts- At first just like the CHS there seemed to be a good amount of vibration maybe it was the parts getting settled in or myself needed to be adjusted to it. The car does grab a lot better. No longer shifting from 6th to 4th is a guessing game and hope it can hit right. The shifter is precise and feels great now. I can feel a little more vibration on deceleration when the car gets a little warm (200 degrees or so) and when I am around 2500 rmp. trans raiting 10/10 love this mod. Engine 8/10.

Exhaust/Z1 post maf tubes- I do love the sound of this combo but I am starting to see worse mpgs than before prob need a tune now. But it does burble a bit. Raiting 9/10

The mod bug has me bad now

. Looking into getting either AAM turbo or Fast intentions. Need to do more research on the difference on the two and where to get everything done

Fast intentions all the way.

JARblue · 12-22-2015, 08:00 AM

jwick · 12-22-2015, 12:59 PM

Quote:

Originally Posted by Morbid370Z

Fast intentions all the way.

Quote:

Originally Posted by JARblue

enrique_370 · 12-22-2015, 02:17 PM

I do like the sound of the EFR turbos. Though internal waste gate is a little bummer. Since we have a ton of traffic here. So faster spooling interests a bit. Though it would prob hook up with the exhaust a lot easier.

roplusbee · 12-23-2015, 06:38 PM

I would steer clear of AAM until they work out some minor fitment issues. I also know of a customer local to TX that had issues with the internal wastegates. I concur with F.I. all the way.

Sent from my SM-N920T using Tapatalk

roplusbee · 12-23-2015, 06:39 PM

By the way, I am down to assist with wrench turning if anyone is going to do so this weekend.

Sent from my SM-N920T using Tapatalk

Pintsize725 · 12-29-2015, 08:51 PM

Houston Zs will be invading the next cars and coffee meet. If you guys are interested, head over to the FB event page and let them know. A dinner will be Saturday night at the Oasis for interested parties.

https://www.facebook.com/events/1696832207228519/

Morbid370Z · 12-30-2015, 06:14 AM

Quote:

Originally Posted by Pintsize725

Houston Zs will be invading the next cars and coffee meet. If you guys are interested, head over to the FB event page and let them know. A dinner will be Saturday night at the Oasis for interested parties.

https://www.facebook.com/events/1696832207228519/

I could make things. Anyone local interested in going?

enrique_370 · 01-01-2016, 10:39 PM

130 people going that should be interesting.

roplusbee · 01-02-2016, 06:56 PM

I signed up, but I doubt I will be attending the dinner.

darkphantom · 01-11-2016, 02:54 PM

Anyone doing anything tomorrow evening?? I'll be in Atx and thought I'd ask

bchinfoon · 01-20-2016, 05:12 PM

Looking to sell my Fast Intentions Exhaust with 18" Resonators, please PM if interested!

Pintsize725 · 02-02-2016, 10:05 PM

Found a nice photo op spot that's new and deserted for now. New office building on 620 westbound between Parmer and Lake Creek. So far no security that I saw. Ignore the horrible quality, I was freezing and kiddo was in the car.

IMG_5007 by Panda House, on Flickr

IMG_5012 by Panda House, on Flickr

12-22-2015, 08:00 AM	#4 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	__________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

12-23-2015, 06:38 PM	#7 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	I would steer clear of AAM until they work out some minor fitment issues. I also know of a customer local to TX that had issues with the internal wastegates. I concur with F.I. all the way. Sent from my SM-N920T using Tapatalk __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

12-23-2015, 06:39 PM	#8 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	By the way, I am down to assist with wrench turning if anyone is going to do so this weekend. Sent from my SM-N920T using Tapatalk __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

12-29-2015, 08:51 PM	#9 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211845	Houston Zs will be invading the next cars and coffee meet. If you guys are interested, head over to the FB event page and let them know. A dinner will be Saturday night at the Oasis for interested parties. https://www.facebook.com/events/1696832207228519/ __________________ Tracie

01-02-2016, 06:56 PM	#12 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 23	I signed up, but I doubt I will be attending the dinner. __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

12-22-2015, 02:17 PM	#6 (permalink)
enrique_370 Base Member Join Date: Sep 2011 Location: Texas Posts: 106 Drives: 2013-black-m6 :) Rep Power: 14	I do like the sound of the EFR turbos. Though internal waste gate is a little bummer. Since we have a ton of traffic here. So faster spooling interests a bit. Though it would prob hook up with the exhaust a lot easier.

01-01-2016, 10:39 PM	#11 (permalink)
enrique_370 Base Member Join Date: Sep 2011 Location: Texas Posts: 106 Drives: 2013-black-m6 :) Rep Power: 14	130 people going that should be interesting.

01-11-2016, 02:54 PM	#13 (permalink)
darkphantom Enthusiast Member Join Date: Apr 2015 Location: Houston, Texas Posts: 425 Drives: 13 Z34 PW M6 Rep Power: 244	Anyone doing anything tomorrow evening?? I'll be in Atx and thought I'd ask __________________ '13 PW M6 \| Takeda \| ARK GRiP V2 \| H&R

01-20-2016, 05:12 PM	#14 (permalink)
bchinfoon Base Member Join Date: Oct 2009 Location: Austin, TX Posts: 42 Drives: 2010 Nismo 370Z Rep Power: 16	Looking to sell my Fast Intentions Exhaust with 18" Resonators, please PM if interested!

02-02-2016, 10:05 PM	#15 (permalink)
Pintsize725 A True Z Fanatic Join Date: Jan 2012 Location: Austin Posts: 14,196 Drives: 2016 Mazda 6 Rep Power: 211845	Found a nice photo op spot that's new and deserted for now. New office building on 620 westbound between Parmer and Lake Creek. So far no security that I saw. Ignore the horrible quality, I was freezing and kiddo was in the car. IMG_5007 by Panda House, on Flickr IMG_5012 by Panda House, on Flickr __________________ Tracie

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hood Vents?	VaGntlmn	Exterior & Interior	38	08-08-2017 07:18 PM
Sun, Apr 3- John Eagle European's Cars and Coffee™ Austin (Austin370Z)	Auston	Texas	10	04-05-2011 02:14 PM
Bumper vents	corbin09	Exterior & Interior	15	03-30-2010 10:51 AM
vents always blow hot air	takimbe	Exterior & Interior	11	09-22-2009 10:03 PM