Plano area shop to install underdrive pulley?

darrinps · 02-17-2011, 09:29 PM

I have an NST under-drive pulley set that should be here tomorrow.

Anyone know of a local shop to get it installed?

The last time I tried to get a pulley off of my Maxima SE it was...well...a pain!

JDW1479 · 02-18-2011, 09:10 AM

Try COBB in Plano, even though they specialize in Evos and Subies, they are a full service shop. Very good customer service and very professional. Tell them JJ sent you from the North Texas Evo Club.

If not COBB, you could try Jotech in Garland. They have installed the Greddy Twin Turbo kits on a few 370s here in Dallas. So they should know their way around the engine pulley system pretty good. But again, they are in Garland and your in McKinney.

NonStopTuning · 02-18-2011, 09:03 PM

Or you could take a road trip down to Houston and say hello

NST - NonStopTuning - The Leader In Sport Compact Pulley Development
NonStopTuning | Facebook

We are located in SW Houston.

Good luck and have fun with all your projects!

darrinps · 02-18-2011, 11:41 PM

Quote:

Originally Posted by JDW1479

Try COBB in Plano, even though they specialize in Evos and Subies, they are a full service shop. Very good customer service and very professional. Tell them JJ sent you from the North Texas Evo Club.

If not COBB, you could try Jotech in Garland. They have installed the Greddy Twin Turbo kits on a few 370s here in Dallas. So they should know their way around the engine pulley system pretty good. But again, they are in Garland and your in McKinney.

Well I don't know if I agree about COBB and good customer service.

I called them today and only got a recording. I left a message as told to, and waited...and waited...and never got a call back.

I then called four other places and no one would touch it.

Might try Jotech then. Garland isn't that far away.

Thanks!

zentropy · 02-19-2011, 01:33 AM

Quote:

Originally Posted by darrinps

Might try Jotech then. Garland isn't that far away.

Thanks!

Last time I was at Jotech I inquired about pulleys and they said they prefer not to do them. I really didn't ask questions because quite frankly I feel they are much more knowledgeable than me in that department.

darrinps · 02-19-2011, 06:25 PM

Quote:

Originally Posted by zentropy

Last time I was at Jotech I inquired about pulleys and they said they prefer not to do them. I really didn't ask questions because quite frankly I feel they are much more knowledgeable than me in that department.

Well I have tried Cobb twice now and they never call me back either.

Never dreamed it would be this difficult to find someone to do it.

alvinmathew88 · 02-20-2011, 02:52 PM

Yea COBB's customer service sucks.. and they never call back..

TXSpeedDemon · 02-21-2011, 02:03 PM

You could try Sam at Crossover Automotive (crossoverauto.com). PM me for his phone number if you're interested.

He's small and rents a few bays out of a place in Plano so he's not that well know here in town, but does good work and has good service. I haven't had him do any work on my Nissan, other than ordering parts which I installed myself, but he did a ton on my Mazda, including a full engine swap for $Ks less than other shops.

darrinps · 02-22-2011, 11:30 AM

PM sent. Thanks

pquaid · 02-22-2011, 03:11 PM

jotech did a lot of work on my car but now i go to T1 in rowlett...im much happier! those guys know what they are doing

awdtuning · 02-24-2011, 09:58 PM

If you are still looking for a shop we can help you out. We have an ASE certified mechanic on staff that specializes in Nissans. Give us a call at 469-277-3001 for more details.
~Mary

BTW we are planning a dyno day for April 16th

tsolin01 · 02-24-2011, 10:10 PM

Sign me up for that Dyno day possibly

make sure to post the details here

darrinps · 02-26-2011, 09:07 PM

Quote:

Originally Posted by awdtuning

If you are still looking for a shop we can help you out. We have an ASE certified mechanic on staff that specializes in Nissans. Give us a call at 469-277-3001 for more details.
~Mary

BTW we are planning a dyno day for April 16th

I got your email after I already called another shop, but thanks for at least getting back to me...a heck of a lot more than _____ did.

I ended up using Crossover in Plano. They did a good job although it took them longer than they thought (and they honored the original quote).

02-17-2011, 09:29 PM	#1 (permalink)
darrinps Base Member Join Date: Jun 2010 Location: McKinney, TX Posts: 84 Drives: 2016 370Z Roadster Rep Power: 15	Plano area shop to install underdrive pulley? I have an NST under-drive pulley set that should be here tomorrow. Anyone know of a local shop to get it installed? The last time I tried to get a pulley off of my Maxima SE it was...well...a pain!

02-18-2011, 09:10 AM	#2 (permalink)
JDW1479 Base Member Join Date: Sep 2010 Location: Desoto, TX Posts: 102 Drives: 2010 Red 370Z Nismo Rep Power: 15	Try COBB in Plano, even though they specialize in Evos and Subies, they are a full service shop. Very good customer service and very professional. Tell them JJ sent you from the North Texas Evo Club. If not COBB, you could try Jotech in Garland. They have installed the Greddy Twin Turbo kits on a few 370s here in Dallas. So they should know their way around the engine pulley system pretty good. But again, they are in Garland and your in McKinney. Last edited by JDW1479; 02-18-2011 at 09:13 AM.

02-18-2011, 09:03 PM	#3 (permalink)
NonStopTuning NOT AN ACTIVE VENDOR Join Date: Aug 2009 Location: USA Posts: 869 Drives: AE86 Rep Power: 17	Or you could take a road trip down to Houston and say hello NST - NonStopTuning - The Leader In Sport Compact Pulley Development NonStopTuning \| Facebook We are located in SW Houston. Good luck and have fun with all your projects! __________________ www.NonStopTuning.com Offering the best in Pulleys, Clutches & Flywheels, Coilovers, and more. Be sure to keep up with us on the NST blog!

02-22-2011, 03:11 PM	#10 (permalink)
pquaid Base Member Join Date: Dec 2009 Location: East Texas Posts: 81 Drives: 370Z TT TS PW Rep Power: 15	jotech did a lot of work on my car but now i go to T1 in rowlett...im much happier! those guys know what they are doing __________________ Greddy TT\| Greddy Ti-C Exahaust\| ID 1000 Injectors\|AAM MAF-Rs\| HKS EVC 6 Boost Controller\| Clutchmasters stage 2 racing clutch/flywheel\| 20" Vossen CV2\|Canton Racing oil cooler/thermostat\|T1 Uprev tuned \| 606whp & 535 tq

02-24-2011, 09:58 PM	#11 (permalink)
awdtuning Base Member Join Date: Sep 2010 Location: Flower Mound, TX Posts: 12 Drives: 2807 Justin Road Rep Power: 15	If you are still looking for a shop we can help you out. We have an ASE certified mechanic on staff that specializes in Nissans. Give us a call at 469-277-3001 for more details. ~Mary BTW we are planning a dyno day for April 16th __________________ AWDTuning 469-277-3001 Keith@awdtuning.com Check Us Out On FACEBOOK http://i69.photobucket.com/albums/i5...allBlklogo.jpg

02-20-2011, 02:52 PM	#7 (permalink)
alvinmathew88 Enthusiast Member Join Date: Mar 2009 Location: Irving, TX Posts: 268 Drives: 97 Civic Ex Coupe Rep Power: 16	Yea COBB's customer service sucks.. and they never call back..

02-21-2011, 02:03 PM	#8 (permalink)
TXSpeedDemon Enthusiast Member Join Date: Jul 2009 Location: Texas Posts: 329 Drives: 370Z, MSP, R8, 335 Rep Power: 3371	You could try Sam at Crossover Automotive (crossoverauto.com). PM me for his phone number if you're interested. He's small and rents a few bays out of a place in Plano so he's not that well know here in town, but does good work and has good service. I haven't had him do any work on my Nissan, other than ordering parts which I installed myself, but he did a ton on my Mazda, including a full engine swap for $Ks less than other shops.

02-22-2011, 11:30 AM	#9 (permalink)
darrinps Base Member Join Date: Jun 2010 Location: McKinney, TX Posts: 84 Drives: 2016 370Z Roadster Rep Power: 15	PM sent. Thanks

02-24-2011, 10:10 PM	#12 (permalink)
tsolin01 Track Member Join Date: Feb 2010 Location: Dallas, TX Posts: 657 Drives: 2010 370Z Rep Power: 16	Sign me up for that Dyno day possibly make sure to post the details here __________________ SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res \| V1 \| SecondSkin \| Stillen G3 \| EVO-R CF B-Pillars \| Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R \| Swift Spec-R Springs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen underdrive pulley and gates belt never installed $110	The Arp	Parts for sale (Private Classifieds)	1	10-13-2010 10:09 PM
stillen underdrive pulley ?	redroadster10	Engine & Drivetrain	5	04-08-2010 02:54 AM
Stillen light weight underdrive pulley & belt.	soaka1	Parts for sale (Private Classifieds)	7	02-23-2010 10:35 PM
Stillen Underdrive pulley. w/ belt.	soaka1	Parts for sale (Private Classifieds)	5	01-19-2010 04:00 PM