exhaust install

pg6speed · 12-09-2010, 07:36 PM

My F.I. install went very smooth. I did it on jack stands and had another set of hands help me hold and position things. No washers needed here, very good fit out of the box.

murphman · 12-09-2010, 07:57 PM

Quote:

Originally Posted by pg6speed

My F.I. install went very smooth. I did it on jack stands and had another set of hands help me hold and position things. No washers needed here, very good fit out of the box.

did you do the recommended jack stands on all 4 points or front then back?

pg6speed · 12-09-2010, 11:22 PM

Quote:

Originally Posted by murphman

did you do the recommended jack stands on all 4 points or front then back?

All I used was stands in the back.

murphman · 12-10-2010, 08:43 AM

Thanks for all the help and answering of questions since this is my first car i will be moding and the first mod i will have done but i have one more question. Will the use of anti seize be recommended in this project?

pg6speed · 12-10-2010, 08:57 AM

A bit of anti-sieze wont hurt anything and it will make it easier to remove later if you should need to. Be sure to install everything loosely at first and then start tightening things from the front of the car to the back. Have someone holding each peice in position as you're tightening and working your way back. Take your time and do it right, its not a race.

Ask as many questions as you need there are plenty of people that can help.

12-09-2010, 07:36 PM	#1 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	My F.I. install went very smooth. I did it on jack stands and had another set of hands help me hold and position things. No washers needed here, very good fit out of the box. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

12-10-2010, 08:43 AM	#4 (permalink)
murphman Track Member Join Date: Dec 2009 Location: houston Posts: 611 Drives: 370z Tour Black 7AT Rep Power: 17	Thanks for all the help and answering of questions since this is my first car i will be moding and the first mod i will have done but i have one more question. Will the use of anti seize be recommended in this project? __________________ Mod List: FI 18" CBE// Eibach Springs// Rear Camber kit// Ingen CAI//

12-10-2010, 08:57 AM	#5 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	A bit of anti-sieze wont hurt anything and it will make it easier to remove later if you should need to. Be sure to install everything loosely at first and then start tightening things from the front of the car to the back. Have someone holding each peice in position as you're tightening and working your way back. Take your time and do it right, its not a race. Ask as many questions as you need there are plenty of people that can help. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARK exhaust install and review	sofa_king	Intake/Exhaust	16	02-24-2012 11:15 AM
Exhaust shop near Dallas to install FI exhaust/hfc?	SM5654	Texas	6	11-05-2010 09:46 AM
Stillen Exhaust install - pics	Azroadster	Intake/Exhaust	8	10-12-2010 05:01 AM
A not so successful Berk Exhaust install...	JB1	Intake/Exhaust	132	03-26-2010 01:23 PM
exhaust install in SF?	vortrex	Northern California Region	7	12-30-2009 10:18 PM