exhaust install

murphman · 12-08-2010, 06:25 PM

Hi guys my exhaust should be here tomorrow or friday and was looking to have it installed this saturday. I called a few places and got quoted 200.00 and 277.00 do these sound high?

tjlazer · 12-08-2010, 06:33 PM

Sounds about right. DIY and save a few hundred bucks!

murphman · 12-08-2010, 06:38 PM

dont you need race ramps to get your car up? i dont have any

Kastley85891 · 12-08-2010, 11:53 PM

Dude, if I was in ATX and not China now I would say drive up and Id do it for you, do not pay $$ to get this installed, maybe a member in H will do it for you for the price of a Starbucks and a Subway.

Keep your $$ for mods

JDW1479 · 12-09-2010, 08:47 AM

Quote:

Originally Posted by murphman

dont you need race ramps to get your car up? i dont have any

Get the car up on jack stands, you don't need ramps. Jack it up and place jackstands underneath it.

pg6speed · 12-09-2010, 11:17 AM

Take a trip to San Antonio and I'll put it on for nothing. Congrats on a great exhaust.

Kastley85891 · 12-09-2010, 11:52 AM

^Good man

murphman · 12-09-2010, 04:55 PM

Quote:

Originally Posted by pg6speed

Take a trip to San Antonio and I'll put it on for nothing. Congrats on a great exhaust.

Well thanks for the offer bro but I am probably going to go have it installed just because i can drop it off and have it done when i get off work or whatever but i must say if you are in Houston at some point, beer on me for your generous offer.

One_Quick_Z · 12-09-2010, 05:40 PM

Yes I vote for a DIY, I installed mine with test pipes in a few hours.

DAN

murphman · 12-09-2010, 05:56 PM

Quote:

Originally Posted by One_Quick_Z

Yes I vote for a DIY, I installed mine with test pipes in a few hours.

DAN

did you have help or was it a 1 man job?
Man yall are really tempting me to do it myself

pg6speed · 12-09-2010, 07:32 PM

DIY on a catback is very straight forward and only requires a jack, stands, and basic hand tools. I installed my catback in a little over an hour, the headers were another story. No need to spend $150-$200 for this install unless you have more cash than time.

One_Quick_Z · 12-09-2010, 08:03 PM

Quote:

Originally Posted by murphman

did you have help or was it a 1 man job?
Man yall are really tempting me to do it myself

I did have help/ and a Lift, I went to a co-workers house who has a work shop with a lift

But yes it is an easy DIY if you are only doing exhaust.. I have done it on jack stands before on other cars of mine.

DAN

One_Quick_Z · 12-09-2010, 08:04 PM

You should have bought it back in Sept. I was in San Antonio for a couple weeks on Vacation, I would have helped you

DAN

murphman · 12-09-2010, 08:12 PM

other than the possible washer to even out the exhaust does anyone know of any prep work needed for these or additional materials that could help for a quicker and easier install? thanks guys.

pg6speed · 12-09-2010, 08:36 PM

My F.I. install went very smooth. I did it on jack stands and had another set of hands help me hold and position things. No washers needed here, very good fit out of the box.

12-08-2010, 06:25 PM	#1 (permalink)
murphman Track Member Join Date: Dec 2009 Location: houston Posts: 611 Drives: 370z Tour Black 7AT Rep Power: 16	exhaust install Hi guys my exhaust should be here tomorrow or friday and was looking to have it installed this saturday. I called a few places and got quoted 200.00 and 277.00 do these sound high? __________________ Mod List: FI 18" CBE// Eibach Springs// Rear Camber kit// Ingen CAI//

12-08-2010, 06:33 PM	#2 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Sounds about right. DIY and save a few hundred bucks! __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

12-08-2010, 06:38 PM	#3 (permalink)
murphman Track Member Join Date: Dec 2009 Location: houston Posts: 611 Drives: 370z Tour Black 7AT Rep Power: 16	dont you need race ramps to get your car up? i dont have any __________________ Mod List: FI 18" CBE// Eibach Springs// Rear Camber kit// Ingen CAI//

12-08-2010, 11:53 PM	#4 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Dude, if I was in ATX and not China now I would say drive up and Id do it for you, do not pay $$ to get this installed, maybe a member in H will do it for you for the price of a Starbucks and a Subway. Keep your $$ for mods __________________ Boosted V8 hunter 2850 lbs and 375WHP

12-09-2010, 11:17 AM	#6 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	Take a trip to San Antonio and I'll put it on for nothing. Congrats on a great exhaust. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

12-09-2010, 11:52 AM	#7 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	^Good man __________________ Boosted V8 hunter 2850 lbs and 375WHP

12-09-2010, 05:40 PM	#9 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	Yes I vote for a DIY, I installed mine with test pipes in a few hours. DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

12-09-2010, 07:32 PM	#11 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	DIY on a catback is very straight forward and only requires a jack, stands, and basic hand tools. I installed my catback in a little over an hour, the headers were another story. No need to spend $150-$200 for this install unless you have more cash than time. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

12-09-2010, 08:04 PM	#13 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	You should have bought it back in Sept. I was in San Antonio for a couple weeks on Vacation, I would have helped you DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

12-09-2010, 08:12 PM	#14 (permalink)
murphman Track Member Join Date: Dec 2009 Location: houston Posts: 611 Drives: 370z Tour Black 7AT Rep Power: 16	other than the possible washer to even out the exhaust does anyone know of any prep work needed for these or additional materials that could help for a quicker and easier install? thanks guys. __________________ Mod List: FI 18" CBE// Eibach Springs// Rear Camber kit// Ingen CAI//

12-09-2010, 08:36 PM	#15 (permalink)
pg6speed Base Member Join Date: Jul 2009 Location: San Antonio Posts: 223 Drives: 10 Armada Rep Power: 16	My F.I. install went very smooth. I did it on jack stands and had another set of hands help me hold and position things. No washers needed here, very good fit out of the box. __________________ STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARK exhaust install and review	sofa_king	Intake/Exhaust	16	02-24-2012 12:15 PM
Exhaust shop near Dallas to install FI exhaust/hfc?	SM5654	Texas	6	11-05-2010 10:46 AM
Stillen Exhaust install - pics	Azroadster	Intake/Exhaust	8	10-12-2010 06:01 AM
A not so successful Berk Exhaust install...	JB1	Intake/Exhaust	132	03-26-2010 02:23 PM
exhaust install in SF?	vortrex	Northern California Region	7	12-30-2009 11:18 PM