Nissan 370Z Forum
Page 2 of 5 1 2 34 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Suspension/Brakes (http://www.the370z.com/suspension-brakes/)
-   -   Whiteline Adjustable Sway Bars | Tunerz Store (http://www.the370z.com/suspension-brakes/30230-whiteline-adjustable-sway-bars-tunerz-store.html)

Tunerz_Store 02-24-2011 10:08 PM
pm's replied.

Tunerz_Store 03-01-2011 06:23 PM
Ready to ship out same day if ordered by 2pm.

Kastley85891 03-02-2011 11:35 PM
Shipped to 78660 please F+R

Tunerz_Store 03-02-2011 11:55 PM
PM sent.

dwntwnall4u 03-03-2011 12:47 AM
F&R shipped to 92117

shabarivas 03-03-2011 12:51 AM
Send me a quote to 95630 for both

Tunerz_Store 03-03-2011 11:03 AM
Quote:
Originally Posted by dwntwnall4u (Post 966917)
F&R shipped to 92117
pm sent.

Tunerz_Store 03-03-2011 11:03 AM
Quote:
Originally Posted by shabarivas (Post 966919)
Send me a quote to 95630 for both

your PM box is full, can't send the message.

Tunerz_Store 03-09-2011 11:06 PM
pm's replied.

Tunerz_Store 03-14-2011 10:54 PM
Thanks for the orders~

370zFORme!! 03-15-2011 12:18 AM
Front and rear shipped to 92831 pls

Tunerz_Store 03-15-2011 08:30 AM
PM sent.

Tunerz_Store 03-18-2011 08:04 AM
Tgif!

Tunerz_Store 03-21-2011 08:42 PM
pm's replied.

Tunerz_Store 03-22-2011 11:27 AM
1 Attachment(s)
Here is some additional information from Whitelineon the sway bars and the stiffness.

Quote:
All our sway bars are solid and yes a two hole adjustment is two settings and a three hole is three settings of adjustment.

As for % of stiffness we do not have information on each hole as on each different sway bar we make the increase would be slightly different as some arms are longer etc plus the fact they attach in different parts of the suspension.

A slight way to understand would be that say a 24mm on the middle hole of three hole adjustment is a 24mm bar stiffness.If it was to be on the hard setting it would be just under the stiffness of a 25mm sway bar.If it was put on the softer setting it would be around close to a 23 mm sway bar.



This chart attached is not 100% accurate it is very close but some swaybars will be slightly different due to the appplication

As you probably already know your sway bars would have been hollow from factory hence why the swaybars we are making in solid will not be really that much larger as being solid they will be allot stiffer than a hollow bar of the same diameter


All times are GMT -5. The time now is 05:48 PM.
Page 2 of 5 1 2 34 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2