TUNERZ STORE | SPC Performance Front & Rear Camber Kits Nissan 370z

[Tunerz_Store]

SPC Performance Camber Kits 370z

These front upper control arms will give you -1 degree to +1.0 degree caster change and up to -2.5 degrees to +2.5 degrees camber change. Simply replace the OE front upper control arms and dial in your suspension angles with our patented sliding ball joint and caster plate. Whether you want to tune your suspension for the ultimate in handling performance, minimize tire wear or easily move back and forth between the two settings, these are the arms to get the job done.

Front Adjustment range:

Camber: -2.5 degrees to +2.5 degrees

Caster: -1.0 degrees to +1.0 degrees


Installation time: .6 hr/side


Required: 1 kit per axle (72130)




The 72260 Adjustable Rear Arm for the Nissan 370z offers maximum adjustment for camber and toe. This is the perfect kit to adjust rear angle for optimum handling and to maximize tire life, adjusts camber+/-3.0 degrees and toe +/- 2.0 degrees. Use the 85130 Rotary File Set to elongate the OE toe slots.

Rear Adjustment range: Camber +/-3.0 degree Toe +/-2.0 degree
Installation time: .6 hr/side
Required: 1 kit per wheel

**This kit uses a larger cam washer to achieve greater adjustment than the OE toe cam provides. In order to take advantage of full toe adjustment mark the area to elongate the existing toe slot with template provided.**



PM me for forum pricing!