Stillen CBE Clearance Problems Fixed?

Zfish · 04-13-2010, 11:40 PM

Quote:

Originally Posted by Red370

where did you order it from? i know there was a batch sent out with fitment issues from the start but has been corrected since, I bought mine directly from Stillen.

There are some pics in my gallery of the piped and cross member. Does this look like the issue you had? Nissan 370Z Forum - Zfish's Album: Zfish's Album

Red370 · 04-14-2010, 12:23 AM

oh that thing, yeah mine hits that as well, determined thats the cause of alot of the vibration i hear, I would assume that pulling the cross member off, hammering the middle in a bit and re installing should allow some clearance.

Zfish · 04-14-2010, 09:01 AM

My brother and I think that shimming the cross member bolts with some washers would probably fix the problem. I'm not quite ready to break out the hammer yet.

Luna · 12-07-2010, 09:14 AM

Quote:

Originally Posted by Red370

oh that thing, yeah mine hits that as well, determined thats the cause of alot of the vibration i hear, I would assume that pulling the cross member off, hammering the middle in a bit and re installing should allow some clearance.

I installed mine yesterday and had the clearance issue. I had to leave the cross member off, any updates with your issue?

Zfish · 12-08-2010, 09:32 PM

Quote:

Originally Posted by Luna

I installed mine yesterday and had the clearance issue. I had to leave the cross member off, any updates with your issue?

I wound up pulling the Y pipe back out, heating the front part just behind the flange, and flattening it with a peen. This gave about a pinkie's worth of clearance and solved the problem. It's been sounding sweet ever since. I had the advantage of doing this with my brother who works at a muffler shop though.

04-14-2010, 12:23 AM	#47 (permalink)
Red370 A True Z Fanatic Join Date: Jul 2009 Location: Kaiserslautern, Germany Posts: 4,391 Drives: your mom to church Rep Power: 296	oh that thing, yeah mine hits that as well, determined thats the cause of alot of the vibration i hear, I would assume that pulling the cross member off, hammering the middle in a bit and re installing should allow some clearance. __________________ 2011 Mustang 5.0 \| 3.55's \| Lethal Performance off road H-Pipe \| Magnaflow Muffler Delete \| JLT CAI/Bama tuned 417whp/ 404 ft/lbs

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 01:53 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 06:20 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 01:41 PM
Altered Atmosphere: 370Z Stillen CAI, Berk HFC, Stillen Exhaust Install	Jon@Altered	Intake/Exhaust	18	07-03-2009 03:21 AM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 11:01 PM

04-14-2010, 09:01 AM	#48 (permalink)
Zfish Base Member Join Date: Mar 2010 Location: Marina, CA Posts: 24 Drives: 2010 370z roadster Rep Power: 15	My brother and I think that shimming the cross member bolts with some washers would probably fix the problem. I'm not quite ready to break out the hammer yet.