shop that can build circuit for evo r foglight

Guard Dad · 10-19-2011, 08:20 PM

Very easy to install. If you've done any mods you should be able to do this one easily.

The $29.22 price was a delivered price. Parts were $23.95 and shipping was $5.27 for a total of $29.22.

Installation is cut and clip, super easy.

fxroar · 10-20-2011, 12:17 AM

Amazing! I'm getting my headlights done this weekend and this will be next on my priority list.

fxroar · 10-20-2011, 10:52 AM

So I went ahead and contacted the company through email in regards to the way I wanted the circuit and here's what I received in response early this morning:

Hi Francis - This could be done as a special the cost would be $50.00 Plus the price of a delay unit $24.50 ex S&H

"To be totally honest we do not see any advantage with this product as our current delay product blinks 6 x in 2.2 seconds if we were to change the amount of flashes say to 3 flashes it would be about 1second the reason for our 6 flashes is its ability to seen and processed by the driver following and the react and act accordingly, the delay of about 8 seconds or 10 should not be relevant.

Remember Be Seen - Be Safe - Be Blinking Smart

Kelly

KAHTEC Sales Team"

Going to contact them again to see if we can get 3-4 flashes within 3 secs then solid on.. 6 flashes within 2.2 secs is too many for CA regulations and would be pretty annoying to the car in the rear. hoping to get a GB going so we can get the cost down.

adampetrasek · 10-20-2011, 12:03 PM

Quote:

Originally Posted by fxroar

So I went ahead and contacted the company through email in regards to the way I wanted the circuit and here's what I received in response early this morning:

Hi Francis - This could be done as a special the cost would be $50.00 Plus the price of a delay unit $24.50 ex S&H

"To be totally honest we do not see any advantage with this product as our current delay product blinks 6 x in 2.2 seconds if we were to change the amount of flashes say to 3 flashes it would be about 1second the reason for our 6 flashes is its ability to seen and processed by the driver following and the react and act accordingly, the delay of about 8 seconds or 10 should not be relevant.

Remember Be Seen - Be Safe - Be Blinking Smart

Kelly

KAHTEC Sales Team"

Going to contact them again to see if we can get 3-4 flashes within 3 secs then solid on.. 6 flashes within 2.2 secs is too many for CA regulations and would be pretty annoying to the car in the rear. hoping to get a GB going so we can get the cost down.

Thanks for looking into this more with Kahtec. For me personally, i dont mind the 6 flashes for 2.2 seconds. Especially since they have the 'delay' version that wont do the 6 flash on consecutive breaking in stop and go type traffic.

Plus i kind of WANT to annoy the car behind me, so that they are paying attention and dont rear end me.

also, the only light flashing would be the 4th light, the fog light, so it shouldn't be too bad?

If you send them another email, could you ask them if there needs to be anything different to the circuit if we are piggybacking the fog light off of one of the normal brake lights??? i would assume there would need to be some sort of isolation between the brake light and the Kahtec unit?

Thanks again for the extra research!!!!

fxroar · 10-20-2011, 12:58 PM

Quote:

Originally Posted by adampetrasek

Thanks for looking into this more with Kahtec. For me personally, i dont mind the 6 flashes for 2.2 seconds. Especially since they have the 'delay' version that wont do the 6 flash on consecutive breaking in stop and go type traffic.

Plus i kind of WANT to annoy the car behind me, so that they are paying attention and dont rear end me.

also, the only light flashing would be the 4th light, the fog light, so it shouldn't be too bad?

If you send them another email, could you ask them if there needs to be anything different to the circuit if we are piggybacking the fog light off of one of the normal brake lights??? i would assume there would need to be some sort of isolation between the brake light and the Kahtec unit?

Thanks again for the extra research!!!!

Will do! Please stay posted.

PS btw.. Cop pulled me over and informed me that state of CA does not allow constant flashing and 3-4 times are allowable.. thus the reason why I want to have the circuit modified a bit.

10-19-2011, 08:20 PM	#1 (permalink)
Guard Dad Enthusiast Member Join Date: Aug 2010 Location: South Orange County, CA Posts: 422 Drives: 2010 370Z Silver A7 Rep Power: 15	Very easy to install. If you've done any mods you should be able to do this one easily. The $29.22 price was a delivered price. Parts were $23.95 and shipping was $5.27 for a total of $29.22. Installation is cut and clip, super easy. Last edited by Guard Dad; 10-19-2011 at 09:44 PM.

10-20-2011, 12:17 AM	#2 (permalink)
fxroar Track Member Join Date: Oct 2009 Location: San Diego, CA Posts: 525 Drives: '10 40th Anniversary Rep Power: 17	Amazing! I'm getting my headlights done this weekend and this will be next on my priority list. __________________ Fast Intentions / K&N / Blox / Evo-R / Uprev / Forgestar 19" F14 / R40 / NST / Z1 / SDCE / H&R / Kenwood / ISS Forged 20" FM10R

10-20-2011, 10:52 AM	#3 (permalink)
fxroar Track Member Join Date: Oct 2009 Location: San Diego, CA Posts: 525 Drives: '10 40th Anniversary Rep Power: 17	So I went ahead and contacted the company through email in regards to the way I wanted the circuit and here's what I received in response early this morning: Hi Francis - This could be done as a special the cost would be $50.00 Plus the price of a delay unit $24.50 ex S&H "To be totally honest we do not see any advantage with this product as our current delay product blinks 6 x in 2.2 seconds if we were to change the amount of flashes say to 3 flashes it would be about 1second the reason for our 6 flashes is its ability to seen and processed by the driver following and the react and act accordingly, the delay of about 8 seconds or 10 should not be relevant. Remember Be Seen - Be Safe - Be Blinking Smart Kelly KAHTEC Sales Team" Going to contact them again to see if we can get 3-4 flashes within 3 secs then solid on.. 6 flashes within 2.2 secs is too many for CA regulations and would be pretty annoying to the car in the rear. hoping to get a GB going so we can get the cost down. __________________ Fast Intentions / K&N / Blox / Evo-R / Uprev / Forgestar 19" F14 / R40 / NST / Z1 / SDCE / H&R / Kenwood / ISS Forged 20" FM10R

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: EVO-R Foglight Install	ProfessorDave	DIY Section (Do-It-Yourself)	159	02-15-2019 06:23 PM
New build: GTM TT Stg II • '08 Infiniti G37 5-spd auto • The Shop CT	SharpByCoop	Forced Induction	153	12-20-2012 08:54 AM
Roof wrap and JDM foglight done !!!!	RockStarKick	Exterior & Interior	22	05-02-2011 08:36 PM
CF rear foglight	josh88	Exterior & Interior	10	05-15-2010 07:21 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM