Recommendations of places to go to get parts/work done in So.Cal

2slow2care

Anyone know a good shop near fullerton?
Have a coolant leak in one of the hoses on the passenger side.

Car is lowered on Swifts.

Thanks

Zbrah

I will let you know how it sounds once I get this exhaust leak checked out, Raf. I lost the hardware for the test pipes so we had to use different size bolts avaible at the shop to secure the tp but it's not tight as it should

__________________

Fly1 Motorsports

Concept 3 Performance in Brea. Talk to the owner Will - good guy

Zbrah

So I just want to follow up and share my experience working with SFE a couple of weeks back getting my suspension installed. I needed help to get my parts put on after I had tweaked my back while working out there was just no way I could tackle this job myself. I contacted a few local shops to have the following parts install: Swift springs, SPL rear camber arms, Spc toe bolts. I knew I would get raped for not DIYing it but the quotes I got were simply outrages! some shops were quoting up to 6 hours of labors! I just didn't find that possible, especially when these shops have access to air tools, spring compressors, lifts,etc...This job could be done in 4 hours even if they were taking their time!...Needless to say, I continued to look around and found my way to Street Faction Engineering on FaceBook. This shop specializes in designing and fabrication drift and track builds, but I found out they also offer aftermarket parts and suspension services so I immediately reached out to Matt, the shop owner. I told Matt the parts I have and he said he would do $120 for the springs and 70 for camber arms and toe bolts, which by the way, also includes elongating the holes for the Spc bolts. I then remember my Art pipes that's been sitting around for last year and Matt said he'll put it on for $100. Sweet friqqin' deal! I was stoked because these prices are literally half off the quotes I got from similar shops in the area! We scheduled for Saturday afternoon even though their normal business hours is M-F. It was awesome because he knew I couldn't afford to take a day off work so he accommodated me.

Upon arrival, I was pleasantly surprised. The shop was very clean and organized. Matt showed me around the shop and talked about the project cars he's got going on. Very cool guy, loves to talk cars and know his way around Nissans. Matt brought in two of his crew to work on my car to speed things up. They managed to get all my suspension pieces and test pipes installed in just around 2.5 hours! The guys worked quickly and efficiently. The install went smooth without any hiccups, well...almost, but it was my damn fault, I had forgotten to bring the hardware for the test pipes but being stubborn, I didn't want to leave without the tp put on so I asked Matt to use any bolts he could find in the shop to temporarily attach them and I would come back another day with the proper size hardware, so as a result of that I've been driving around with a leaked tp surprisingly the car hadn't throwing any codes or CELs but I'll try to go back and get it all tightened up soon. I got my car aligned a few days later and the car drives perfect. No creaks or noise from the new springs. The Swifts are very comfortable to drive on, it absorb impacts much better than the stock springs I had. Handling is also greatly improved, the car definitely feel more planted. I was able to dial the rear alignment #s within specs, no problems there. The front cambers currently sit around -2.5 but that's all I can hope for until I get some front camber arms put in. Overall, it was a great experience. The guys at Street Faction Engineering did a fantastic job on my suspension and test pipes. I'm really glad I have found them, and I would recommend anyone around the area to check them out if you need custom fabrication or just looking to get some parts installed. You can get in touch with Matt directly via FaceBook or text him 562-507-1390 for any inquiries.

Street Faction Engineering
12035 Burke St Unit 15
Santa Fe Springs, California
(562) 507-1390

https://www.facebook.com/StreetFactionEngineering

__________________

cames4

So I called my mechanic at Specialty-Z in Chatsworth with an issue with my shifter for my 2014 Z as it vibrates and makes a God awful noise at 4200 RPM's. While they could have offered to resolve they suggested I contact the local dealer as the car is still under warranty; I paused and thanked them for making the suggestion as it could save me some money. I guess I did not think about the dealer since I generally do not want them touching my car but in this case, the mechanic was right on target.

Ok, how many mechanic do you know who would help you save money like that? I have lived in five states and owned over 30 vehicles and never had someone as helpful and honest as Specialty-Z

axmea?

This is where I go. Good experience - always .

__________________

Hotrodz

Axmea? Speaks the truth!!

Sent from my SM-N910P using Tapatalk

__________________
Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:|Fast Intentions 3" TT-TDX|SpecialtyZ/Fast Intentions 72 Row Oil Cooler|SZ 6 Puck Clutch & Flywheel|3GsCustoms|Z1|Wavetrac|Hotchkis|Whiteline |Blitz|Fortune Auto 500|Fujimura|SPL|H&R|TK|TWM|RPM Rollbar|Sparco|Next Level Performance|TrackSpec|AeroFlow Dynamics|Pioneer|

jchammond

I see this is a lowering thread;don't want to sound (stupid) but i haven't considered it till recently.
What is a conservative amount of drop-pending you want to stay with oem diameter tires & not overly aggressive offset's.
1", 1.5" ?? i
I know i will be able to have adjustments of front camber & caster then.
also i Drag-Race my car & don't want much(if any) rear camber.
Suggestion's would be appreciated.
Ty,joby

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

marrawi

So I found this little gem shop in Socal and I had them put Invidia Gemini CBE. They did an excellent job some pix below. they're super friendly and offer amazing prices.

IMG_20150923_223143.jpg

IMG_20150923_223201.jpg

image.jpg

Here is their info FYI:

Unique Motorsports
15941 Kaplanave
City of Industry, CA 91744
Ask for James Mao, his # 541-226-7718

jeezzuss

Can anyone recommend any shops i can take my car for the 60k maintenance check?

Zbrah

what's your location?

__________________

jeezzuss

Anaheim?

Zbrah

Perfect. Go to Socal Motorworks in Orange. Ask for Andy. He's open Saturday too (9-1pm), but appointment only.
808 W Angus Ave # B, Orange, CA 92868
(714) 288-9872

__________________

lhinojos

Looking For place to get Clutch work done. Im located in riverside but im willing to drive over an hour if its worth it. Preferably someone thats experienced with installing Z1's CSC elimination kit

Zbrah

^Specialty Z?

__________________