Powder Coated My tower BAr

lastblueprint · 06-10-2010, 05:41 PM

What do you guys think?
I went and got my tower bar powder coated Fire Hydrant red. I will keep this color for a couple weeks then change it to something else. What do you guys think on the color? I did red because I have the 40th anniversary so the interior and caliper are red so I went along with the theme.

Here are stock colored tower pictures

Here are pictures of the new powder coated one.

There you go, hope you guys like.

phelan · 06-10-2010, 05:50 PM

if i had a 40th i wouldn't touch it, but yes, it does tie in with the whole red motif it has

lastblueprint · 06-10-2010, 05:59 PM

Thanks, you are right about not touching the car, let it be. But I can’t in the next couple of months my car will change, well performance wise. No F.I. on my car all NA goodies. I won’t mess with the interior nor body, just a add on kit and that would be it.

Jamaica · 06-11-2010, 01:26 AM

is that moreno valley ca I see?

Trips · 06-11-2010, 01:40 AM

I agree on not doing to much, it's a special Z.
On the tower brace, what happened to the 40th badge? At least put it back on..

lastblueprint · 06-11-2010, 10:51 AM

Yes Sir, will put the badge back on. Just need to go to Pepboys and get the glue or tape and get it back on there. Yes, I’m also in Moreno Valley, got’s to rep the I.E.

I'll take new pictures with the badge back on

KingZee · 06-11-2010, 12:34 PM

It looks cool, doesn't take much away from the 40th anniversery (a body kit will though) and I agree with Triple's, will be nicer once you put the badge back on.

vipor · 06-11-2010, 05:43 PM

How close does this red match the calipers? It looks a lot brighter.

nogoodname · 06-11-2010, 05:45 PM

You should put the emblem back on it.

lastblueprint · 06-11-2010, 06:20 PM

Actually its very hard to tell. Unless i pull of the tower bar and put it in front. other than that it looks almost identical match.

Jamaica · 06-12-2010, 01:28 PM

Quote:

Originally Posted by lastblueprint

Yes Sir, will put the badge back on. Just need to go to Pepboys and get the glue or tape and get it back on there. Yes, I’m also in Moreno Valley, got’s to rep the I.E.

I'll take new pictures with the badge back on

Hey bro we should meet up sometime

lastblueprint · 06-12-2010, 05:53 PM

I'm down to hang out, have you hit up hog burgers? In Moreno Valley?

Well here are some pictures with the badge back on.

So what you guys think?

nogoodname · 06-12-2010, 06:06 PM

Looks much better with the emblem back on!

Maybe paint the silver part on the engine cover red too?

Xan · 06-12-2010, 06:16 PM

I was kind of suprised they didn't put the Nismo engine cover on the 40th.

On the keeping it for a couple of weeks and then re-doing it.
I'm not sure what the heating/cooling process with PC does to the material properties of the bar, but you might want to consider this...

lastblueprint · 06-13-2010, 11:47 AM

You think so, wow thats some thing to consider. Thanks for the heads up

06-10-2010, 05:41 PM	#1 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	Powder Coated My tower BAr What do you guys think? I went and got my tower bar powder coated Fire Hydrant red. I will keep this color for a couple weeks then change it to something else. What do you guys think on the color? I did red because I have the 40th anniversary so the interior and caliper are red so I went along with the theme. Here are stock colored tower pictures Here are pictures of the new powder coated one. There you go, hope you guys like. __________________ 2010 370z 40th Anniversary

06-10-2010, 05:50 PM	#2 (permalink)
phelan A True Z Fanatic Join Date: Apr 2009 Location: CA Age: 38 Posts: 9,513 Drives: Scoobaroo Rep Power: 3406	if i had a 40th i wouldn't touch it, but yes, it does tie in with the whole red motif it has __________________ 凛 ('Rin') - 2009 Nissan 370Z With silence comes peace. With peace comes freedom. With freedom comes silence.

06-10-2010, 05:59 PM	#3 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	Thanks, you are right about not touching the car, let it be. But I can’t in the next couple of months my car will change, well performance wise. No F.I. on my car all NA goodies. I won’t mess with the interior nor body, just a add on kit and that would be it. __________________ 2010 370z 40th Anniversary

06-11-2010, 01:40 AM	#5 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	I agree on not doing to much, it's a special Z. On the tower brace, what happened to the 40th badge? At least put it back on.. __________________

06-11-2010, 10:51 AM	#6 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	Yes Sir, will put the badge back on. Just need to go to Pepboys and get the glue or tape and get it back on there. Yes, I’m also in Moreno Valley, got’s to rep the I.E. I'll take new pictures with the badge back on __________________ 2010 370z 40th Anniversary

06-11-2010, 01:26 AM	#4 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	is that moreno valley ca I see?

06-11-2010, 12:34 PM	#7 (permalink)
KingZee A True Z Fanatic Join Date: Feb 2010 Location: Glendale, CA Age: 41 Posts: 2,612 Drives: Focus ST Rep Power: 423	It looks cool, doesn't take much away from the 40th anniversery (a body kit will though) and I agree with Triple's, will be nicer once you put the badge back on.

06-11-2010, 05:43 PM	#8 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	How close does this red match the calipers? It looks a lot brighter. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

06-11-2010, 05:45 PM	#9 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	You should put the emblem back on it.

06-11-2010, 06:20 PM	#10 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	Actually its very hard to tell. Unless i pull of the tower bar and put it in front. other than that it looks almost identical match. __________________ 2010 370z 40th Anniversary

06-12-2010, 05:53 PM	#12 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	I'm down to hang out, have you hit up hog burgers? In Moreno Valley? Well here are some pictures with the badge back on. So what you guys think? __________________ 2010 370z 40th Anniversary

06-12-2010, 06:06 PM	#13 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1765	Looks much better with the emblem back on! Maybe paint the silver part on the engine cover red too?

06-12-2010, 06:16 PM	#14 (permalink)
Xan A True Z Fanatic Join Date: Jan 2010 Location: MA Posts:99999999999999 Posts: 3,301 Drives: 370Z 40th Aniversary Rep Power: 24	I was kind of suprised they didn't put the Nismo engine cover on the 40th. On the keeping it for a couple of weeks and then re-doing it. I'm not sure what the heating/cooling process with PC does to the material properties of the bar, but you might want to consider this... __________________

06-13-2010, 11:47 AM	#15 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 15	You think so, wow thats some thing to consider. Thanks for the heads up __________________ 2010 370z 40th Anniversary

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alliance BBK (First Powder-Coated Red)	JB-370z	Brakes & Suspension	27	09-05-2011 02:21 PM
Nismo factory rims powder coated GR-02	Minicobra1	Wheels & Tires	61	09-06-2010 12:36 AM
Powder coated base wheel pic request	ddvette9	Wheels & Tires	5	06-12-2010 06:56 PM
powdered coated base wheels on MB?	OC 370ZEEE	Member's 370Z Gallery	10	11-05-2009 05:44 PM
Coated or Non-coated wheels?	YamahaR6	Wheels & Tires	2	04-14-2009 09:46 AM