it was my fault took a turn waaayyy too fast starting going sideways for a good 10 seconds until i was perpendicular to the street(luckily no cars) went up the
|
|
LinkBack | Thread Tools | Display Modes |
05-27-2010, 12:23 AM | #1 (permalink) |
Track Member
Join Date: Feb 2009
Location: so cal
Posts: 793
Drives: 2009 370Z 6MT
Rep Power: 270 |
Fu@KIN6 PO'D crashed the z..need help(FONTANA NISSAN???)
it was my fault took a turn waaayyy too fast starting going sideways for a good 10 seconds until i was perpendicular to the street(luckily no cars) went up the curb scratch my passenger sideskirts, ripped both splash guards and Fu@ked up my stillen exhaust both tips are bent
drive home notice steering wheel out of alignment too i pray to god i didnt bent the frame at all can anyone recomend a good body shop to check everything without charging an arm and a leg **People from fontana nissan i cant think of any other dealers who would be familiar on the specs of the car anyway you guys can maybe help me out to check out the car to see if any permanent damaged was made??? im about an hour and a half from you guys so its quiet a drive i dont know who else to go to... HELP!!!
__________________
Stillen G3 CAI*Stillen CBE*Berk's HFC*Eibach Prokit*Hotchkis Sways*ichiba 15/20mm spacers*? Oil cooler*Stillen Pulley*Stillen Headers |
05-27-2010, 12:30 AM | #2 (permalink) |
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,730
Drives: 🔰
Rep Power: 10 |
Ahh Man, that sucks Marco!!
I don't know of any sorry, I wish I could help, have you tried to send Scott or Danny a Pm to see if they can help? I'm at a loss for words other than I hope you get her fixed soon. gl |
05-27-2010, 12:36 AM | #3 (permalink) |
Track Member
Join Date: Feb 2009
Location: so cal
Posts: 793
Drives: 2009 370Z 6MT
Rep Power: 270 |
only time a man would freakin cry......ggggrrr
__________________
Stillen G3 CAI*Stillen CBE*Berk's HFC*Eibach Prokit*Hotchkis Sways*ichiba 15/20mm spacers*? Oil cooler*Stillen Pulley*Stillen Headers |
05-27-2010, 12:43 AM | #5 (permalink) |
Track Member
Join Date: Feb 2009
Location: so cal
Posts: 793
Drives: 2009 370Z 6MT
Rep Power: 270 |
what sux is i didnt need this expense......
__________________
Stillen G3 CAI*Stillen CBE*Berk's HFC*Eibach Prokit*Hotchkis Sways*ichiba 15/20mm spacers*? Oil cooler*Stillen Pulley*Stillen Headers |
05-27-2010, 12:58 AM | #8 (permalink) |
Track Member
Join Date: May 2009
Location: Los Angeles
Posts: 559
Drives: 2009 Silver MT 370Z
Rep Power: 18 |
damn marco... sorry to hear...I was almost crying when i hit a cone on the fwy last week and got spider cracks and small bend in the lower fang area...i feel you bro...
__________________
|
05-27-2010, 01:03 AM | #9 (permalink) |
Enthusiast Member
Join Date: Feb 2010
Location: Los Angeles
Posts: 336
Drives: On The Weekends
Rep Power: 23 |
Based on what you described, I would say your "frame" is fine, although you probably have a good amount of suspension damage. Lucky for you this is socal and there are a million body shops here to choose from. The only thing I can recommend is to stay away from the sage dealer groups as all they do is kick people over to 3rd party shops which do pretty shoddy work(I learned the hard way). Atlease your alive to post about it!
|
05-27-2010, 01:28 AM | #10 (permalink) |
Enthusiast Member
Join Date: Mar 2009
Location: So Cal / SF Valley
Posts: 329
Drives: 09 370Z Mag Blk
Rep Power: 16 |
Oh Marco Marco Marco. I bet traction control was turned off.. Sorry to read what happen. Wish you luck.
__________________
09 370Z Mag Blk, 6MT,Tour, Sprt Pkg, Nav |
05-27-2010, 01:29 AM | #11 (permalink) |
Track Member
Join Date: Feb 2009
Location: so cal
Posts: 793
Drives: 2009 370Z 6MT
Rep Power: 270 |
some pics(mostly exhaust)
im really worried bout suspension damged
__________________
Stillen G3 CAI*Stillen CBE*Berk's HFC*Eibach Prokit*Hotchkis Sways*ichiba 15/20mm spacers*? Oil cooler*Stillen Pulley*Stillen Headers |
05-27-2010, 06:12 PM | #12 (permalink) |
Base Member
Join Date: Mar 2010
Location: Orange County, CA
Posts: 55
Drives: Black 370Z
Rep Power: 15 |
A few tips
Marco:
These cars have many aluminium parts and will bend way before they break. I had the exact same thing happen to my 05 Steeda Mustang GT. The best chance to have a car that is still true is to call your insurance company and when they give you a list of body shops focus on an arguement of how new the vehicle is and the lack of technical expetise a body shop would have on such a new design. Usually if you complain enough they will have one or two Nissan Dealers that if they feel inclined will be in there system and they will allow you to take it there and they will pay for the damages. The next step is to contact the person at the dealer who will be in charge of the project. If you get to know him he will substitute the factory parts ( For example the new factory exhaust system for quality aftermarket and put a brand new stillen exhaust on the car). I had modified my Steeda with Custom wheels and exhaust as well as special springs with custom spring rates and since the factory parts were as much or more than aftermarket they ordered the aftermarket parts for me so my car was exactly the same. The dealer is the only one that is going to replace every bent or slightly imperfect part but they will only go the extra mile if you establish a relationship with the person in charge of your project. Sorry to hear what happened but you will need to execute your plan to perfection to get the car back in like new condition. It can be done if the person uses the when in doubt switch it out method of vehicle repair which is what is needed in such a sophisticated sports car with so many weight saving materiels Good luck, Mark |
05-27-2010, 08:52 PM | #14 (permalink) |
Track Member
Join Date: Feb 2009
Location: so cal
Posts: 793
Drives: 2009 370Z 6MT
Rep Power: 270 |
alright guys thanks for the support
at this point i think im more worried about any frame and suspension damages i need it to get checked asap i had stillen check the exhaust and they siad its bent out of shape and would be cheaper to get a replacement(not in my funds right now) so im thinking of just putting the stock exhaust back on i know my alignment is off since my steering wheel is slightly to the right when im driving straight as i drive to stillen about an hour in the vdc light and slippage indicator came on it stayed on until i turned the car off then it disappered when i turned it on again you think im better off having the dealer check it? as i check the car this morning the only part that hit in the car was preety much the exhaust i dont know why my alignment was thrown off on another note i notice my AC wasnt blowing cold air dunno how that got affected hopefully all this would be under warranty
__________________
Stillen G3 CAI*Stillen CBE*Berk's HFC*Eibach Prokit*Hotchkis Sways*ichiba 15/20mm spacers*? Oil cooler*Stillen Pulley*Stillen Headers |
05-27-2010, 08:54 PM | #15 (permalink) |
Track Member
Join Date: Feb 2009
Location: so cal
Posts: 793
Drives: 2009 370Z 6MT
Rep Power: 270 |
lou i need a quote to get stock exhaust back on....
__________________
Stillen G3 CAI*Stillen CBE*Berk's HFC*Eibach Prokit*Hotchkis Sways*ichiba 15/20mm spacers*? Oil cooler*Stillen Pulley*Stillen Headers |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ings+1 now available at Fontana Nissan! | Scott@FontanaNissan | Body Interior/Exterior | 12 | 10-17-2012 05:18 PM |
Employee Pricing on All Nissan Accessories at Fontana Nissan!!! | Scott@FontanaNissan | Body Interior/Exterior | 15 | 06-25-2010 05:33 PM |
Fontana Nissan -- Nissan/Nismo/Z Apparel and Gear! | Scott@FontanaNissan | Nissanraceshop.com - Supporting Dealer | 15 | 01-20-2010 02:18 PM |
Fontana Nissan -- HKS Exhaust now Available!!! | Scott@FontanaNissan | Nissanraceshop.com - Supporting Dealer | 1 | 10-06-2009 11:12 AM |
Fontana Nissan, Ca | mattjk | New 370Z Owner | 1 | 07-14-2009 09:25 PM |