Southern California Clear Bra Installer

SoCal 370Z · 02-10-2009, 04:37 PM

Preface: I have no affiliation with Aero Tect and this is the first time I have contracted their services. I explained to them that I would be photographing the process, and there are more photographs, but for the sake of brevity I chose ones that convey the results.

Our 370Z just completed its clear bra installation through Aero Tect.

Areas covered include:

Bumper
Headlights
Bikini Cut Hood with the hood piece being wrapped versus pattern cut to edge
Fender (to bikini line) and Mirrors
A-Pillar and Roof
Rear Wheel Impact Area (Aero Tect industry 1st)
Factory Splash Guard Impact Area (Aero Tect industry 1st)

Material: VentureShield Ultra

I was searching for an installer who had a shop as I prefer that versus doing in my garage or theirs—Aero Tect fit my criterion well with a dedicated bay, and the added bonus of all the equipment to cut needed the patterns in-house, plus design, and cut if necessary.

Since I wanted a bit more protection and in reviewing the car with Francisco Castillo (the shop owner), along with Jason, and Adi, they derived, designed, and made the first available (that I know of) Rear Wheel Impact Area kit for the large flanks on the wheel wheels opening just behind the doors! They are also designing a kit for the Nissan factory splashguards, both front and rear to help prevent the areas of impact from getting damaged from flying tire debris. Custom!

My wife and and I could not be more satisfied with the results. In fact I was so pleased (I was there during the installation that I asked them to custom cut one of their logos that we placed on the rear windshield. It is always great when matters go well as I always hesitate (read worry) when having to have work done to any of our vehicles.

I will be adding more photograph(s) shading the exact ares where the clear bra was applied (as I have in the rear impact area).

I recommend Aero Tect with no reservations as they are enthiuasts like us!

Aero Tect
1935 Mckinley Ave Ste F
La Verne CA 91750-5840
Toll Free: (866) 388-2376

P.S. Watermarking the photographs with the Aero Tect logo was my idea (as I like to give credit to people for their work) and permission was granted for use on said photographs from Aero Tect.

Frick@DDM · 02-10-2009, 04:42 PM

Great looking car

Definitely a great way to protect your investment.

My next car will have a clear bra installed

dad · 02-10-2009, 04:47 PM

Rear wheel impact area-smart move!

Asheth · 02-10-2009, 04:49 PM

+1 some one bestow reps lol I can't rep you anymore Socal

I was just about to see if I could find a video on youtube on this

SoCal 370Z · 02-10-2009, 04:57 PM

Thanks guys! The splash guards came in late so I have to add those photographs. There is also another area on the Z they are working on with us to add even more protection to a very accessed space.

AK370Z · 02-10-2009, 05:23 PM

Awesome thread! thanks for sharing! Looks like I gotta add a DIY section ASAP with all these articles!

AeroTect · 02-10-2009, 07:18 PM

Thanks for the kind words Jim. We'll se you soon for the splash guards.

Jason

HTP AutoWorks · 02-10-2009, 11:53 PM

Nice looking install. I do have a question though. Why trim on the car for the fenders when there are kits out there that provide the same coverage? Xpel also has a kit for the rocker panels out. Have you thought of using their pattern and adding on the additional rear wheel impact area coverage? Would make a nice overall package...

AeroTect · 02-11-2009, 12:38 PM

Quote:

Originally Posted by HTP AutoWorks

Nice looking install. I do have a question though. Why trim on the car for the fenders when there are kits out there that provide the same coverage?

Thanks!

Actually, the kits that are available appear to be non-wrapping kits. When possible we like to wrap the film around the front and sides of the hood, as well as the top of the fenders, thus making it a custom job that requires trimming.

Beyond that, even the best kits sometimes need trimming.

Quote:

Originally Posted by HTP AutoWorks

Xpel also has a kit for the rocker panels out. Have you thought of using their pattern and adding on the additional rear wheel impact area coverage? Would make a nice overall package...

The Xpel rocker pannels cover the bottom section of what we did, plus continue all the way to the front wheel well. Rather than cutting the entire length, we just designed a rear only section with the upper portion as well. We can pretty much do anything, just a matter of what the customer wants vs. cost... We have Xpel, Proform, and Invisible Patterns software to choose from, but that doesn't mean that any one of them is always the best option.

SoCal 370Z · 02-11-2009, 02:02 PM

Aero Tect did mention the rocker panel kit to me, but since we are installing the factory splash guards I felt we didn't need that specify kit; I might be wrong, but will find out over time (and chips).

B C · 02-11-2009, 04:46 PM

I need to do this. Thanks for the post. I will give them a call.

tnk210 · 02-12-2009, 03:05 AM

Good group of folks. They did my 350 earlier this year...

RedlineHR · 02-22-2009, 09:06 AM

how's the film quality as fas as smoothness? I have seen some cleaar-bra film with orange-peel of it's own - made the paint look even more orange-peel-like.

AeroTect · 04-01-2009, 12:01 PM

Quote:

Originally Posted by hiz-n-herz

how's the film quality as fas as smoothness? I have seen some cleaar-bra film with orange-peel of it's own - made the paint look even more orange-peel-like.

VentureShield has no Orange Peel. We carry a few different brands of film, and are more than happy to show our customers a side by side comparison.

initialgemini · 07-08-2009, 10:27 PM

I just got a clearbra package (same packaged as socal370z) done by them, and I just wanted to share with everyone it looks amazing. They did a wonderful job installing it. No orange peel or anything. I would definitely recommend this place to have a worry free install. (We all know having peace of mind in any car install is priceless)

Thanks again Jason and Francisco, it was a pleasure!

Chris

02-10-2009, 04:37 PM	#1 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	Southern California Clear Bra Installer Preface: I have no affiliation with Aero Tect and this is the first time I have contracted their services. I explained to them that I would be photographing the process, and there are more photographs, but for the sake of brevity I chose ones that convey the results. Our 370Z just completed its clear bra installation through Aero Tect. Areas covered include: Bumper Headlights Bikini Cut Hood with the hood piece being wrapped versus pattern cut to edge Fender (to bikini line) and Mirrors A-Pillar and Roof Rear Wheel Impact Area (Aero Tect industry 1st) Factory Splash Guard Impact Area (Aero Tect industry 1st) Material: VentureShield Ultra I was searching for an installer who had a shop as I prefer that versus doing in my garage or theirs—Aero Tect fit my criterion well with a dedicated bay, and the added bonus of all the equipment to cut needed the patterns in-house, plus design, and cut if necessary. Since I wanted a bit more protection and in reviewing the car with Francisco Castillo (the shop owner), along with Jason, and Adi, they derived, designed, and made the first available (that I know of) Rear Wheel Impact Area kit for the large flanks on the wheel wheels opening just behind the doors! They are also designing a kit for the Nissan factory splashguards, both front and rear to help prevent the areas of impact from getting damaged from flying tire debris. Custom! My wife and and I could not be more satisfied with the results. In fact I was so pleased (I was there during the installation that I asked them to custom cut one of their logos that we placed on the rear windshield. It is always great when matters go well as I always hesitate (read worry) when having to have work done to any of our vehicles. I will be adding more photograph(s) shading the exact ares where the clear bra was applied (as I have in the rear impact area). I recommend Aero Tect with no reservations as they are enthiuasts like us! Aero Tect 1935 Mckinley Ave Ste F La Verne CA 91750-5840 Toll Free: (866) 388-2376 P.S. Watermarking the photographs with the Aero Tect logo was my idea (as I like to give credit to people for their work) and permission was granted for use on said photographs from Aero Tect. Last edited by SoCal 370Z; 02-10-2009 at 08:18 PM.

02-10-2009, 04:47 PM	#3 (permalink)
dad Grand Prix of Endurance Join Date: Nov 2008 Location: Tennessee Posts: 3,476 Drives: Mulsanne Straight Rep Power: 26	Rear wheel impact area-smart move! __________________ We can do without any article of luxury we have never had; but once obtained, it is not in human nature to surrender it voluntary.

02-10-2009, 04:49 PM	#4 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 17	+1 some one bestow reps lol I can't rep you anymore Socal I was just about to see if I could find a video on youtube on this __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

02-10-2009, 04:57 PM	#5 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	Thanks guys! The splash guards came in late so I have to add those photographs. There is also another area on the Z they are working on with us to add even more protection to a very accessed space. Last edited by SoCal 370Z; 02-10-2009 at 05:07 PM.

02-10-2009, 05:23 PM	#6 (permalink)
AK370Z Administrator Join Date: Sep 2008 Location: NJ Posts: 9,930 Drives: 09 370Z MB Sports M6 Rep Power: 10	Awesome thread! thanks for sharing! Looks like I gotta add a DIY section ASAP with all these articles! __________________ The370Z Signature Pictures ll Want to rock our forum decals on your car? Then click here! ll How to Embed YouTube Videos In a Post STOP! (Hammertime) ll Become a Premium Member Click HERE ll F.A.Q. Are You a Nissan Dealer? Click Here to Become A "Supporting Dealer" and Start Listing Your 370Zs In Our Inventory Section My Monterey Blue Z ll My Exhaust --> My Intake --> G3 Nissan's Official Response Regarding Oil Temp Issue: CLICK HERE Need a Set of Cheap Winter wheels /Tires? Then Visit The Banner Link Below and Place Your Order. You'll Help Keep The370Z Alive.

02-10-2009, 04:42 PM	#2 (permalink)
Frick@DDM The370Z.com Sponsor Join Date: Feb 2009 Location: San Diego Posts: 71 Drives: Danger Ranger Rep Power: 16	Great looking car Definitely a great way to protect your investment. My next car will have a clear bra installed

02-10-2009, 07:18 PM	#7 (permalink)
AeroTect Base Member Join Date: Feb 2009 Location: Southern California Posts: 8 Drives: 350z Roadster Rep Power: 16	Thanks for the kind words Jim. We'll se you soon for the splash guards. Jason

02-10-2009, 11:53 PM	#8 (permalink)
HTP AutoWorks Banned Join Date: Jan 2009 Location: DFW Posts: 124 Drives: G35, Jeep SRT-8 Rep Power: 0	Nice looking install. I do have a question though. Why trim on the car for the fenders when there are kits out there that provide the same coverage? Xpel also has a kit for the rocker panels out. Have you thought of using their pattern and adding on the additional rear wheel impact area coverage? Would make a nice overall package...

02-11-2009, 02:02 PM	#10 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 33	Aero Tect did mention the rocker panel kit to me, but since we are installing the factory splash guards I felt we didn't need that specify kit; I might be wrong, but will find out over time (and chips).

02-11-2009, 04:46 PM	#11 (permalink)
B C Base Member Join Date: Nov 2008 Location: Rancho Cucamonga, CA Posts: 14 Drives: 09 Nissan 370Z MB A7 Rep Power: 17	I need to do this. Thanks for the post. I will give them a call. __________________ 2009 370Z Touring Sport 7AT- Magnetic Black

02-22-2009, 09:06 AM	#13 (permalink)
RedlineHR Base Member Join Date: Dec 2008 Location: CA Bay area Posts: 71 Drives: Red 07 Z, SS 06 Z Rep Power: 241	how's the film quality as fas as smoothness? I have seen some cleaar-bra film with orange-peel of it's own - made the paint look even more orange-peel-like.

07-08-2009, 10:27 PM	#15 (permalink)
initialgemini Enthusiast Member Join Date: Mar 2009 Location: Irvine, CA Posts: 340 Drives: 2011 FX 35 Rep Power: 250	I just got a clearbra package (same packaged as socal370z) done by them, and I just wanted to share with everyone it looks amazing. They did a wonderful job installing it. No orange peel or anything. I would definitely recommend this place to have a worry free install. (We all know having peace of mind in any car install is priceless) Thanks again Jason and Francisco, it was a pleasure! Chris

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Greetings from Southern California	JonnyH	Introduction	5	06-11-2014 12:22 PM
370Z Clear Bra	Educ8r	Nissan 370Z General Discussions	23	03-06-2009 11:12 AM
Hello from Southern California!	Maynard	Introduction	6	01-04-2009 05:40 PM
Sup homies! Form southern cali!	jrurbin	New Forum Member	8	11-13-2008 06:09 PM