RJM Clutch Kit
 

Hello,

I have a few questions regarding the RJM clutch kit, first of all just wondering overall is it worth it? What are the pros and cons how much of an upgrade is it really? Next if I did decide to purchase it are there any good body shops in the San Diego area that are familiar with installing these? Thanks in advance!

Its highly suggested to install yourself, so you know how to tune it if you aren't completely happy with the engagement settings. The guide really does walk you through everything.

Pros:
smoother shifts
wider engagement window (ability to use more of the pedal throw, safely)
Customizable to fit your needs
Changes angle compared to stock clutch pedal, and I believe is easier on your CSC. (even when you regularly press clutch to the floor)

Cons:
?

Sent from my A0001 using Tapatalk

Cons: Backpain from installing

Decided to buy it, next step is trying to not totally mess up installing it, if anyone wants to come help out beers on me haha!

This is one where the money you pay someone else to do it is worth every penny. You can always learn how to adjust to your liking without having to install it yourself. It was hard for me to fit underneath. I tried and and was a pain in the arse so I stopped and said where's the darn checkbook.

That's what I do for most of my mechanical/bigger installs. I'll drop it off at lunch and come back and pick it up before my shop closes. I get the job done correctly and efficiently and I got to work while that was being done to be able to try and make up for the $$$ spent that day at the shop :tup:

I have one sitting in my garage waiting to be installed as I refuse to do this myself. Where in Cali did you get yours installed?

The install really isn't all that bad, if any of you need help, give me a hollar

Do you have the RJM v3.1 that just came out or did you install the v2.1?

The v3.1 according to a friend of mine too like an hour and a half to install and that was with a couple longer than intended beer breaks lol :driving:

I am going to probably be buying the RJM v3.1 clutch pedal and the RJM MSC

I have the v2, I heard the v3 is much easier to install. I also installed a v1 on a buddy's 350z. That one took 5 hours of frustration

I definitively need help if you don't mind :tiphat:
I bought ver 3.1 and I'm waiting to install it :shakes head:

Shoot me a PM and let's figure something out!

RJM Clutch Kit
 

Our cars already have clutch issues to begin with.

Let's avoid any future problems and let the pro (or CM370z) install the kit for you.

I did install mine, a lot of swearing during install and back pain the next few days. Months later, I ended up replacing the master cylinder due to poor installation.

Lesson learnt.

Right?
That's why I'm going to do the RJM master slave cylinder as well with the purchase of the v3.1 pedal

I agree. I think most people ignore the last steps RJM include that deals with tuning the clutch pedal. Your master cylinder probably blew due to improper placement/adjustment of the two sensors on the pedal. Those sensors control how much clutch fluid is allowed into the master cylinder and if screwed on at the wrong depth, the master cylinder will have an improper amount of fluid in it, which will cause the already weak mechanism to prematurely fail.