Atlanta, GA?

Dustin@Z1 · 06-21-2010, 08:18 AM

James - The Z looks good at night. I knew that Fog was bright!

The factory Reverse Fog light is supposed to have a "Fog" Switch. Even with the switch ON, it will only activate the light when the head lights are switched ON.

To make the installation simple and painless, I suggest tapping into the Tag Light wires. The Fog Light does not pull that much power and will not trigger the blown blub light on the dash. Once you tap into these wires, you can simple drop the wires down the inside of the rear fascia and connect it to the fog light. Just make sure you secure the wires away from the exhaust. I will be supplying all reverse fog lights with an extended harness and 2 Scotch-Lock connectors for a quick install, however I HIGHLY recommend soldering the wires for a much more connection.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Atlanta Z owners...Roll Call Inquiry...Anyone here?	kevr6	Southern Region	19	12-31-2009 09:30 AM
Hello!! Atlanta 370Z owner coming aboard!	kevr6	New 370Z Owner	6	03-18-2009 10:52 PM
Hello from Atlanta	dharvison	New Forum Member	1	02-17-2009 12:17 AM
Hello from Atlanta, GA	rjennings30	New 370Z Owner	1	01-29-2009 10:16 PM
New member from Atlanta area	semtex	New 370Z Owner	13	01-14-2009 11:57 AM

06-21-2010, 08:18 AM	#11 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	James - The Z looks good at night. I knew that Fog was bright! The factory Reverse Fog light is supposed to have a "Fog" Switch. Even with the switch ON, it will only activate the light when the head lights are switched ON. To make the installation simple and painless, I suggest tapping into the Tag Light wires. The Fog Light does not pull that much power and will not trigger the blown blub light on the dash. Once you tap into these wires, you can simple drop the wires down the inside of the rear fascia and connect it to the fog light. Just make sure you secure the wires away from the exhaust. I will be supplying all reverse fog lights with an extended harness and 2 Scotch-Lock connectors for a quick install, however I HIGHLY recommend soldering the wires for a much more connection.