Atlanta, GA?

kevr6 · 06-25-2010, 08:48 AM

Very nice!! You have good taste, sir!! These cars are meant for the dish effect!!

Z1804 · 06-25-2010, 09:28 AM

Quote:

Originally Posted by kevr6

Very nice!! You have good taste, sir!! These cars are meant for the dish effect!!

Following in your footsteps homie. You set the bar pretty high with those Venacis.

daisuke149 · 06-25-2010, 09:49 AM

Quote:

Originally Posted by Z1804

Following in your footsteps homie. You set the bar pretty high with those Venacis.

im gonna set the bar really low by keeping the stockers!! :-D

Mike · 06-25-2010, 10:07 AM

they look great James!

Z1804 · 06-25-2010, 11:31 AM

Quote:

Originally Posted by Mike

they look great James!

Thanks Mike! I have to wait 8 weeks to get them. It feels like forever

Mike · 06-25-2010, 12:37 PM

Quote:

Originally Posted by Z1804

Thanks Mike! I have to wait 8 weeks to get them. It feels like forever

a dealership bent one of my iforged wheels on my 350z and I had to wait 3 and a half months for a replacement, so I know what its like!

kevr6 · 06-25-2010, 09:54 PM

Took me 5 to 6 months to get my wheels after being to told 8 to 10 weeks.

Z1804 · 06-26-2010, 02:49 AM

Quote:

Originally Posted by Mike

they look great James!

Quote:

Originally Posted by kevr6

Took me 5 to 6 months to get my wheels after being to told 8 to 10 weeks.

That's not very encouraging Kev...

That would put me in 2011. Why did it take so long, outside of the fact that it was coming from Japan?

kevr6 · 06-26-2010, 06:49 AM

Quote:

Originally Posted by Z1804

That's not very encouraging Kev...

That would put me in 2011. Why did it take so long, outside of the fact that it was coming from Japan?

I just think I was the first person to order that wheel. Plus They were made to order with Inner TPMS valve stem. (Second hole drilled out)

Z1804 · 06-26-2010, 07:01 AM

Quote:

Originally Posted by kevr6

I just think I was the first person to order that wheel. Plus They were made to order with Inner TPMS valve stem. (Second hole drilled out)

Gotcha....I hope my deadline is more accurate because I know I'm not the first. Not even close........I told him to drill the holes for the TPMS too.

'10Anamoly · 06-26-2010, 02:43 PM

Sharp looking rims James!

On a side note: MAD PROPS to Z1 for helping me install my JDM fog light and wire it up. Looks so much better than the OEM blacked out panel. Booyah!

Sharif@Forged · 06-26-2010, 06:41 PM

Guys looking for special and custom wheels, we offer HRE's with 3-4 week turnaround time in most cases. No super long waits.

Viera · 06-26-2010, 08:37 PM

Quote:

Originally Posted by Sharif@Forged

Guys looking for special and custom wheels, we offer HRE's with 3-4 week turnaround time in most cases. No super long waits.

Super laps............

Z1804 · 06-28-2010, 07:02 AM

Quote:

Originally Posted by Sharif@Forged

Guys looking for special and custom wheels, we offer HRE's with 3-4 week turnaround time in most cases. No super long waits.

The HRE wheels look great. By the same token, a set of 20s is going to cost at least $5800-$6500 for just the wheels. I think more of us would entertain them if prices were more reasonable. I know I would........

Z1804 · 06-28-2010, 10:50 AM

What's up guys? Dyno Day at Z1 is on Saturday, July 3rd.

LINK -- Information about Z1 Dyno Day

The guys at Z1 were nice enough to agree to host this event. I hope all of you will be able to make it.

Price:
$25 (Includes 3 dyno pulls & Lunch)

So far this is who will be in attendance:

James -- Z1804 + 1
Jonathan -- Viera
Chris -- '10Anamoly + 1
Kerry -- TN GTM TT
Daisuke -- daisuke149
NewlyIMPORTed -- Bryce
Matt -- Matt + 1
ATL_Red_G35 -- Kevin
Raybuck -- Alex
Dean --
Bromotoz -- Bruce
Patt Ess -- 350Z
Jonathan -- XSenergy
Dennis -- atl370z
Josh --
Rob -- G35
Carlton -- 350Z
John --
Rod S. --

06-25-2010, 08:48 AM	#1 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 667	Very nice!! You have good taste, sir!! These cars are meant for the dish effect!! __________________ *Beware...* Daily Sliding In My ZLED!

06-25-2010, 10:07 AM	#4 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	they look great James! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

06-25-2010, 09:54 PM	#7 (permalink)
kevr6 A True Z Fanatic Join Date: Feb 2009 Location: N.W. Atlanta Posts: 1,515 Drives: '09 Graphite 370Z 6M Rep Power: 667	Took me 5 to 6 months to get my wheels after being to told 8 to 10 weeks. __________________ *Beware...* Daily Sliding In My ZLED!

06-26-2010, 02:43 PM	#11 (permalink)
'10Anamoly Track Member Join Date: May 2010 Location: GA Posts: 882 Drives: 2010 370Z BS M6 Rep Power: 17	Sharp looking rims James! On a side note: MAD PROPS to Z1 for helping me install my JDM fog light and wire it up. Looks so much better than the OEM blacked out panel. Booyah! __________________ 2013 Ford Mustang GT 374rwhp, 360rwtq SAE / GT500 Axle-Backs / Brembo Pack / Track Pack / Recaros / 6spd

06-26-2010, 06:41 PM	#12 (permalink)
Sharif@Forged The370Z.com Sponsor Join Date: Dec 2008 Location: Marietta, GA Posts: 840 Drives: 2009 GT-R, 2010 370Z Rep Power: 18	Guys looking for special and custom wheels, we offer HRE's with 3-4 week turnaround time in most cases. No super long waits. __________________ Sharif@Forgedperformance.com General Manager/Certified Tuner/NASA-PCA-BMWCAA Instructor JRZ RS1's Available NOW...PM me Cobb ProTuner, Uprev ECU Flash, FCON Vpro, Haltech, Motec Certified

06-28-2010, 10:50 AM	#15 (permalink)
Z1804 Premium Member Join Date: May 2010 Location: GA Posts: 784 Drives: 2009 370Z Sport M6 Rep Power: 17	Z1 Motorsports 370Z/G37 Dyno Day & BBQ -- July 3rd What's up guys? Dyno Day at Z1 is on Saturday, July 3rd. LINK -- Information about Z1 Dyno Day The guys at Z1 were nice enough to agree to host this event. I hope all of you will be able to make it. Price: $25 (Includes 3 dyno pulls & Lunch) So far this is who will be in attendance: James -- Z1804 + 1 Jonathan -- Viera Chris -- '10Anamoly + 1 Kerry -- TN GTM TT Daisuke -- daisuke149 NewlyIMPORTed -- Bryce Matt -- Matt + 1 ATL_Red_G35 -- Kevin Raybuck -- Alex Dean -- Bromotoz -- Bruce Patt Ess -- 350Z Jonathan -- XSenergy Dennis -- atl370z Josh -- Rob -- G35 Carlton -- 350Z John -- Rod S. -- __________________ Z1804 ------ Z1804 ------ Z1804 ------ ------ Z1804 ------ Z1804 ------ Z1804 Fairlady Z 2011 Calendar Now on Sale!!! Last edited by Z1804; 07-01-2010 at 07:34 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any Atlanta Z owners...Roll Call Inquiry...Anyone here?	kevr6	Southern Region	19	12-31-2009 09:30 AM
Hello!! Atlanta 370Z owner coming aboard!	kevr6	New 370Z Owner	6	03-18-2009 10:52 PM
Hello from Atlanta	dharvison	New Forum Member	1	02-17-2009 12:17 AM
Hello from Atlanta, GA	rjennings30	New 370Z Owner	1	01-29-2009 10:16 PM
New member from Atlanta area	semtex	New 370Z Owner	13	01-14-2009 11:57 AM