The Official FLORIDA Thread

AlphaSnacks · 08-25-2012, 02:10 AM

Where are the best twisties in the Orlando area?

Zoren 370 · 08-25-2012, 03:49 AM

Quote:

Originally Posted by AlphaSnacks

Where are the best twisties in the Orlando area?

Harry Potter Roller Coaster Adventure Ride?

Kidding.
FL is flat land no mountainous areas....Maybe some sharp curves but with city traffic I doubt if you can make a 60mile pass.

That is why I'm looking of moving to North Carolina up in the mountains if I can find a job. I like to leave in a cabin house.

nismochiq · 08-27-2012, 06:53 PM

Ok so I had a little problems with my z as some of you might know, had a nail in my tire, my fuel was contaminated, cleaned it out with fuel injector cleaner works fine now but my check engine light is still on, stopped sputtering and maintains good rpm at idle. But the VDC light comes on and loses power I'm thinking it might have been the tire but roamed around the threads with it and found it might be the throttle body, what do you guys think? I still am going to take it to Deland Nissan.

Osiris · 08-27-2012, 06:59 PM

Quote:

Originally Posted by nismochiq

Ok so I had a little problems with my z as some of you might know, had a nail in my tire, my fuel was contaminated, cleaned it out with fuel injector cleaner works fine now but my check engine light is still on, stopped sputtering and maintains good rpm at idle. But the VDC light comes on and loses power I'm thinking it might have been the tire but roamed around the threads with it and found it might be the throttle body, what do you guys think? I still am going to take it to Deland Nissan.

Describe "loses" power? Does the light stay on? Any other lights along with it? When this happens, can you rev the engine past 2500rpm? If you shut car off and back on do the symptoms go away?

nismochiq · 08-27-2012, 07:06 PM

Quote:

Originally Posted by Osiris

Describe "loses" power? Does the light stay on? Any other lights along with it? When this happens, can you rev the engine past 2500rpm? If you shut car off and back on do the symptoms go away?

It happens when i am on the highway or after I have been driving a while. Losing power meaning not much acceleration but still can go. It stays on but turns off when I turn on and off the car.

Osiris · 08-27-2012, 07:10 PM

Quote:

Originally Posted by nismochiq

It happens when i am on the highway or after I have been driving a while. Losing power meaning not much acceleration but still can go. It stays on but turns off when I turn on and off the car.

well, on the bright side, it doesn't sound like full limp mode...believe me, you'll know when that happens! Been there! But still, something ain't right, you taking it in tomorrow?

nismochiq · 08-27-2012, 07:32 PM

Probably and yes I'm glad it isn't full limp mode lol, I've got class so I am going to figure something out in between

happytheman · 08-27-2012, 10:33 PM

Yeah, take it to Derek. He'll get you straightened out. I had a fouled throttle body on my Cougar some years ago and it had very laggy acceleration. Good luck.

nismochiq · 08-27-2012, 11:59 PM

Quote:

Originally Posted by happytheman

Yeah, take it to Derek. He'll get you straightened out. I had a fouled throttle body on my Cougar some years ago and it had very laggy acceleration. Good luck.

Thanks a lot and I will!

Huck · 08-28-2012, 12:30 AM

That's weird, I wonder why a dirty throttle body would make the VDC light come on? I thought that came on only when it was something wrong with steering, traction, or braking. Let us know how it turns out!

Sent from my iPizzle using magic and new-fangled science stuff

Zoren 370 · 08-28-2012, 06:09 AM

Huck

What type of stillen pulley you have? Is it the underdriven?
Any significant change with acceleration?
I ordered the Standard type.

Huck · 08-28-2012, 02:18 PM

Mine is the standard size, I got it brand new off of a member here for a very good price. I don't notice a difference in the butt dyno, it adds maybe 4-5 hp, but when you blip the throttle it's much more responsive, and it smooths out the acceleration some. The standard size weighs I think 1.5lbs, and the stock one is 6.5lbs. Big difference. I think you'll like it. If you have any questions on the install let me know.

Sent from my iPizzle using magic and new-fangled science stuff

nismochiq · 08-28-2012, 04:02 PM

Quote:

Originally Posted by Huck

That's weird, I wonder why a dirty throttle body would make the VDC light come on? I thought that came on only when it was something wrong with steering, traction, or braking. Let us know how it turns out!

Sent from my iPizzle using magic and new-fangled science stuff

Thanks I will I honestly don't know what is going on with it just guesses I looked at the schematics and well they aren't explained very well but I will let you know

Osiris · 08-28-2012, 06:10 PM

Quote:

Originally Posted by Huck

That's weird, I wonder why a dirty throttle body would make the VDC light come on? I thought that came on only when it was something wrong with steering, traction, or braking. Let us know how it turns out!

Sent from my iPizzle using magic and new-fangled science stuff

seems she is getting slight limp mode. When mine went into limp mode, the VDC, Airbag, Check Engine lights all came on.

OMGiGOTaZ · 08-29-2012, 10:00 PM

Holy Z Day today!

White Nismo on 54....

Gun Metal With Black Rims? 54 & 41

Black Roadster on 52

08-27-2012, 06:53 PM	#393 (permalink)
nismochiq Enthusiast Member Join Date: Nov 2010 Location: San Diego, CA Posts: 296 Drives: Hard Rep Power: 15	Ok so I had a little problems with my z as some of you might know, had a nail in my tire, my fuel was contaminated, cleaned it out with fuel injector cleaner works fine now but my check engine light is still on, stopped sputtering and maintains good rpm at idle. But the VDC light comes on and loses power I'm thinking it might have been the tire but roamed around the threads with it and found it might be the throttle body, what do you guys think? I still am going to take it to Deland Nissan. __________________

08-27-2012, 07:32 PM	#397 (permalink)
nismochiq Enthusiast Member Join Date: Nov 2010 Location: San Diego, CA Posts: 296 Drives: Hard Rep Power: 15	Probably and yes I'm glad it isn't full limp mode lol, I've got class so I am going to figure something out in between __________________

08-27-2012, 10:33 PM	#398 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Yeah, take it to Derek. He'll get you straightened out. I had a fouled throttle body on my Cougar some years ago and it had very laggy acceleration. Good luck. __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub

08-28-2012, 12:30 AM	#400 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	That's weird, I wonder why a dirty throttle body would make the VDC light come on? I thought that came on only when it was something wrong with steering, traction, or braking. Let us know how it turns out! Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

08-28-2012, 02:18 PM	#402 (permalink)
Huck A True Z Fanatic Join Date: Jan 2012 Location: Cocoa, Florida Age: 42 Posts: 5,075 Drives: Pantydropper machine Rep Power: 33	Mine is the standard size, I got it brand new off of a member here for a very good price. I don't notice a difference in the butt dyno, it adds maybe 4-5 hp, but when you blip the throttle it's much more responsive, and it smooths out the acceleration some. The standard size weighs I think 1.5lbs, and the stock one is 6.5lbs. Big difference. I think you'll like it. If you have any questions on the install let me know. Sent from my iPizzle using magic and new-fangled science stuff __________________ VLEDS \| Evo-R \| Moddiction \| CF Hood Struts \| F.I. CF CBE & LTH \| Stillen CAI \| NST Pulleys \| UpRev \| Z1 \| M7 \| Status \| Forgestar \| PSS \| Whiteline \| SPL \| SPC \| Kenwood \| Zenclosure \| Kicker \| Alpine Type R

08-25-2012, 02:10 AM	#391 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 18	Where are the best twisties in the Orlando area?

08-28-2012, 06:09 AM	#401 (permalink)
Zoren 370 A True Z Fanatic Join Date: Mar 2012 Location: FL Posts: 11,018 Drives: 11 Nissan 370 M6 Rep Power: 1913653	Huck What type of stillen pulley you have? Is it the underdriven? Any significant change with acceleration? I ordered the Standard type.

08-29-2012, 10:00 PM	#405 (permalink)
OMGiGOTaZ Enthusiast Member Join Date: Jul 2012 Location: Florida Posts: 316 Drives: 12 370Z Auto Sport Rep Power: 13	Holy Z Day today! White Nismo on 54.... Gun Metal With Black Rims? 54 & 41 Black Roadster on 52 __________________ all you gotta do is...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official What Are You Looking For Thread?	THMotorsports	THMotorsports	10	02-21-2017 07:24 PM
Official Halloween Thread	frost	The Lounge (Off Topic)	92	11-05-2013 04:18 PM
Official Z33 to Z34 thread!	SmoothZ	Nissan 370Z General Discussions	64	11-17-2011 09:34 PM
[MLB] Official MLB '09 Season Thread	xDIEGOx	Sports	5	04-23-2009 09:34 AM