SouthEast MEGA Gathering/Meeting. March 19th, 2011!

SPOHN · 03-09-2011, 10:51 AM

Quote:

Originally Posted by billet370

If today was 19th I would have cried...

Yea. A little chilly also. I want to see some daisy dukes that day. LOL.

Xander117 · 03-09-2011, 11:40 AM

Quote:

Originally Posted by SPOHN

Yea. A little chilly also. I want to see some daisy dukes that day. LOL.

I drove into work today too >_< I fail at weather channel.

daisuke149 · 03-09-2011, 11:58 AM

Quote:

Originally Posted by daisuke149

SouthEast MEGA Gathering/Meeting. March 19th, 2011!

Z1 Specials
These specials are good for purchases made during the event for people attending the event!

SPC Front/Rear Camber Kit w/ Toe Bolts (al 4 corners!)
SPC Front And Rear Camber Arms Package with Toe Bolts
50$ off package.

Z1 Oil cooler Kits 370Z/G37
Z1 MotorSports Oil Cooler Kit
$50 off 25 and 34 row kits

CSF aluminum radiator! $ 649... normally 849$
CSF Aluminum Radiator | Condensor Combo

Wheel spacers and extended studs - combos only
Z1 MotorSports Hub Centric Wheel Spacers w/ Extended studs
20% off

Z1 Silicone Hoses for 370Z/G37
Z1 MotorSports Silicone Hoses
20% off

Z1 SS Clutch lines and Brake lines
Z1 MotorSports SS Clutch & Brake Lines
20% off

Z1 370Z Testpipes
Z1 MotorSports Test Pipes
20% off

(More to come possibly! keep an eye out!)

Quote:

Originally Posted by daisuke149

DETAILING

EVERYTHING THAT FOLLOWS IS for AT THE EVENT. If you want detailing done the day before etc, contact the people directly!

Okay guys. There are 2 people/companies detailing at this event for us:

Pat@ApexAuto
Raybuck (Alex with Artistic Tint & Shine)

Apex Auto is offering:

20$ wash and wax (exterior)
60$ Clay, Polish and Wax (exterior)

Raybuck is offering:

60$ Clay, Polish and Wax (exterior)
10$ interior detail w/o leather
15$ interior detail w/ leather.

You do not have to get the interior and exterior from same person!

Claying/polishing/waxing does take time. So there is a limited amount of cars that can be done realistically.

Raybuck 5 people (maybe more depending on what 1-5 want)

Pat@ApexAuto 10 people (maybe more depending on demand and packages)

So, post up what package you want and if you prefer a detailer. If you don't have a preference we'll just split up the people as spots are available.

Trying to make this a non competitive thing! just fyi. This should be a relaxing event for everyone and not a marketing/competitive frenzy.

Quote:

Originally Posted by raybuck

If there is enough interest (3 or more cars) our tinter/owner will come out and tint Z's at the event for $180 with a lifetime warranty. He has done plenty of the370z.com members cars including Dai, newlyimported (Bryce), Viera (Jonathan), KCL@AOI (Kevin, twin turbo Nismo), Ryan from Forged's GTR, etc. If we can get 3 cars, he will also beable to offer black roof vinyl for $100.

Here are just a few pictures of members cars he has done.

My car as well:

I'll update later with more pictures.

bumping these to new page incase people miss it.

BTw, guys for services not provided by z1 (Tint, Vinyl, Detail) try to bring CASH please

Also Raybuck Detailing is full.
Spencer Tinting/Roof is full. BUT spencer is local to Atlanta, you guys can make appointments with him anytime.

aadosx · 03-09-2011, 02:00 PM

Quote:

Originally Posted by SPOHN

Dang John, you guys are going to be busy. Hope you all have some fun.

lolz they will be.. they're going to be making bank!

daisuke149 · 03-09-2011, 05:30 PM

New Specials added:

Stillen Front Fascia
Stillen Front Fascia @ Z1
449$

Stillen Front Splitter
Stillen Front Splitter @ Z1
205$

Stillen Sway Bars (Front and rear!) @ Z1
[waiting for link] (Front & Rear are adjustable)
289$

SPOHN · 03-09-2011, 06:01 PM

Need specials on the undershroud. I believe they would sell more of these if so.

kevr6 · 03-09-2011, 08:03 PM

Quote:

Originally Posted by SPOHN

Need specials on the undershroud. I believe they would sell more of these if so.

Someone needs to explain the benefits to me for this replacement bellypan.
(that's what it's called)
The current bellypan is thick plastic with a crease allowing you to partially unscrew it and pull open securing it with a bungee cord to drain the oil and access the filter. If you install this piece you will now have to remove the entire bellypan each time you perform your oil change. You adding weight and I'll bet that there isn't that much of a difference in protection or wind deflection.
Someone correct me if I'm wrong! Thanks

Nismo221 · 03-09-2011, 08:28 PM

Quote:

Originally Posted by kevr6

Someone needs to explain the benefits to me for this replacement bellypan.
(that's what it's called)
The current bellypan is thick plastic with a crease allowing you to partially unscrew it and pull open securing it with a bungee cord to drain the oil and access the filter. If you install this piece you will now have to remove the entire bellypan each time you perform your oil change. You adding weight and I'll bet that there isn't that much of a difference in protection or wind deflection.
Someone correct me if I'm wrong! Thanks

There is a door for oil changes! Also vents are added to help vent hot engine air

torpedo2k · 03-09-2011, 08:43 PM

LINK
Wont fit the Nismo though...

Quote:

Originally Posted by kevr6

Someone needs to explain the benefits to me for this replacement bellypan.
(that's what it's called)
The current bellypan is thick plastic with a crease allowing you to partially unscrew it and pull open securing it with a bungee cord to drain the oil and access the filter. If you install this piece you will now have to remove the entire bellypan each time you perform your oil change. You adding weight and I'll bet that there isn't that much of a difference in protection or wind deflection.
Someone correct me if I'm wrong! Thanks

Nismo221 · 03-09-2011, 08:48 PM

I wonder why it wont fit the Nismo? this just means I'm going to have to design my own.

Nismo221 · 03-09-2011, 08:49 PM

Oh and do we know what % tint the tinter is bringing?

Viera · 03-09-2011, 08:51 PM

Quote:

Originally Posted by Nismo221

Oh and do we know what % tint the tinter is bringing?

He might bring his entire inventory! lol

Viera · 03-09-2011, 08:53 PM

Quote:

Originally Posted by kevr6

Someone needs to explain the benefits to me for this replacement bellypan.
(that's what it's called)
The current bellypan is thick plastic with a crease allowing you to partially unscrew it and pull open securing it with a bungee cord to drain the oil and access the filter. If you install this piece you will now have to remove the entire bellypan each time you perform your oil change. You adding weight and I'll bet that there isn't that much of a difference in protection or wind deflection.
Someone correct me if I'm wrong! Thanks

It does look like it'll add some weight, but with vents and a hatch for quick oil changes, it doesn't look too bad. Would I get one? Probably not.. but it's a pretty nifty gadget if I do say so myself

SPOHN · 03-09-2011, 09:16 PM

Quote:

Originally Posted by kevr6

Someone needs to explain the benefits to me for this replacement bellypan.
(that's what it's called)
The current bellypan is thick plastic with a crease allowing you to partially unscrew it and pull open securing it with a bungee cord to drain the oil and access the filter. If you install this piece you will now have to remove the entire bellypan each time you perform your oil change. You adding weight and I'll bet that there isn't that much of a difference in protection or wind deflection.
Someone correct me if I'm wrong! Thanks

Some of the question have been answered. But it helps with cooling and not having to remove the the undershroud everytime for oil changes via the trap door. It's still pretty light from what I hear. But no big deal. Especially after I've already shaved weight from my wheels, test pipes, exhaust, and spare tire.

daisuke149 · 03-09-2011, 09:18 PM

id get it and powdercoat it white....

looks cool to me :-D

03-09-2011, 06:01 PM	#546 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Need specials on the undershroud. I believe they would sell more of these if so. __________________

03-09-2011, 08:48 PM	#550 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 36 Posts: 489 Drives: 2010 370z Nismo Rep Power: 15	I wonder why it wont fit the Nismo? this just means I'm going to have to design my own. __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

03-09-2011, 08:49 PM	#551 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 36 Posts: 489 Drives: 2010 370z Nismo Rep Power: 15	Oh and do we know what % tint the tinter is bringing? __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SPOT LIST DATABASE!!! The Whos who of the southeast!	bullitt5897	South East Region	110	02-08-2013 05:36 PM
Interior Swap - Atlanta or Southeast	matrix_square	South East Region	7	08-22-2010 05:18 PM
Great Z Gathering in Connecticut last Saturday	Mergnthwirker	Nissan 370Z General Discussions	0	11-02-2009 02:14 PM
Looking To Get Parts Painted in the SouthEast	jerkey	Exterior & Interior	4	08-29-2009 04:28 PM
Dublin nissan z gathering	Sashimi	Northern California Region	14	07-08-2009 05:13 PM

03-09-2011, 05:30 PM	#545 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	New Specials added: Stillen Front Fascia Stillen Front Fascia @ Z1 449$ Stillen Front Splitter Stillen Front Splitter @ Z1 205$ Stillen Sway Bars (Front and rear!) @ Z1 [waiting for link] (Front & Rear are adjustable) 289$

03-09-2011, 09:18 PM	#555 (permalink)
daisuke149 My *** is famous! Join Date: Mar 2010 Location: Alpharetta, GA Posts: 4,849 Drives: 2013 Boss 302 PW Rep Power: 31	id get it and powdercoat it white.... looks cool to me :-D