Z1 34 Row Oil Cooler, Stillen Gen2 air intake, Top Speed muffler

DarylP · 07-01-2014, 11:29 PM

Sadly, I have traded in my 370Z Nismo and therefore, I am selling the following parts I removed before trade in. All parts were originally bought new by me and installed/removed by me. I have receipts to show date of purchase but, have to go by memory how many miles they were used for since I turned in the service manual where date/miles were logged. Below are parts I have for sale. I will ship from 77354.

Z1 Motorsports 34 Row Oil Cooler with SS protective braided lines, thermo plate and all hardware needed to install. This cooler made a huge difference dropped my normal oil temp 30-40 degrees depending on how aggressive I was driving. Used to run around 225-240 degrees now stays around 180-190 degrees. Aggressive driving pushes it to 220. Used for about 15,000 miles. I will send install instructions that came with cooler. Good DIY instructions on this forum as well. Paid $640 new. Asking $475 + paypal fee and shipping.

Attachment 90717

Attachment 90718

Stillen Gen2 Air intake with Z1 motorsports silicone breather hoses. Used for about 25,000 mi. Filters have been cleaned twice and I will clean them before shipping so you can quickly install. Installation is easy and I will forward instructions that came with intakes. $250 + pay pall fee and shipping.
[ATTACH]Attachment 90720[/ATTACH]

GTR Start Button $25 + pay pal fee and shipping
Magnetic Oil drain plug $10 + shipping
Attachment 90721

Top Speed Axle back Exhaust - 4.5" beveled edge tip, 2.25" I.D. pipe. These took about 10 mins to install on my Nismo using the factory bolts as the nuts are welded onto to the factory flange. They stick out just a bit more than stock. I will send the factory gaskets if you want to attempt to use them instead of getting new ones from Nissan. These were on the car for 14 months (13,000 miles). Plenty of sound clips online. In my opinion, they are a little too loud inside the car (my kids disagree) but, everyone else says they sound awesome outside the car. There is a slight drone nearing 4,000 RPM's then once load evens out it is noticeably softer. They were definitely worth the price to see what type of exhaust sound I like rather than spend $1,300 and not care for the sound. There is one tiny dent (size of eraser) on top of one can which you can not see once mounted. $230 + pay pal fee and shipping.
Attachment 90722
Attachment 90723

Front and Rear Nissan "burger" emblems (rear has plasti dip on it which can be peeled off, front is stock) $15 for both.

Rear "370Z" letters and rear "Nismo" letters that have been painted black. I have them taped as they came out of foam template. Forum member "CubanZ" currently has the foam templates I sent him to install the letters perfectly. Contact him to get them back....then forward to moderator or someone who can manage them within the forum.

Stock Radio/CD player $20.

Lastly, I have touch up paint for 2011 Nismo Pearl White base coat and top coat in the little bottles from Nissan. I also just bought base coat and top coat spray cans (1 of each) from "Automotive Touchup" using my paint code. I had planned to attempt masking rock chips and using spray paint along with sandpaper stuck to pencil eraser as the paint sticks don't do a good job. Spray cans have never been used and touchup from Nissan used very little. $30 for all touchup paint.

Let me know if you would like more pictures. Thanks!!

DarylP · 07-01-2014, 11:34 PM

Here is a pic of air intakes off of car.
Stillen Gen2.jpg

dwnchiu · 07-02-2014, 12:14 AM

Dibs on the start button

Tempestz · 07-02-2014, 02:42 AM

I want the topspeed axle back. Pm quote shipped to 96706 ewa beach, Oahu, Hawaii

2sl0w · 07-02-2014, 03:15 AM

Pm shipped quote for paint to 30308 please.

Sent from my Nexus 5 using Tapatalk

Kayzee · 07-02-2014, 03:43 AM

Dibs on intakes.

Pm price shipped to 10312 please.

DarylP · 07-02-2014, 10:35 PM

Quote:

Originally Posted by 2sl0w

Pm shipped quote for paint to 30308 please.

Sent from my Nexus 5 using Tapatalk

2slow...I never received a PM?? I will PM you.

Glokwork · 07-03-2014, 05:41 AM

Willing to to sell just the oil cooler core alone?

John_Chantal · 07-07-2014, 02:37 PM

Still available the stillen intake?

Sent from my iPhone using Tapatalk

carlitos_370z · 07-30-2014, 02:47 PM

do you still have the Top Speed axle back??

2sl0w · 07-30-2014, 07:10 PM

Purchased Paint. Everything arrived as described by seller. Ty Daryl.

Sent from my Nexus 5 using Tapatalk

gumi4680 · 07-30-2014, 07:51 PM

Dips on oil cooler. Pm me final pricing shipped to 92887.

oero_ballin16 · 09-07-2014, 10:26 PM

still have axle back?

07-01-2014, 11:29 PM	#1 (permalink)
DarylP Base Member Join Date: Jun 2011 Location: Houston, TX Posts: 29 Drives: 2011 370Z Nismo Rep Power: 14	Z1 34 Row Oil Cooler, Stillen Gen2 air intake, Top Speed muffler Sadly, I have traded in my 370Z Nismo and therefore, I am selling the following parts I removed before trade in. All parts were originally bought new by me and installed/removed by me. I have receipts to show date of purchase but, have to go by memory how many miles they were used for since I turned in the service manual where date/miles were logged. Below are parts I have for sale. I will ship from 77354. Z1 Motorsports 34 Row Oil Cooler with SS protective braided lines, thermo plate and all hardware needed to install. This cooler made a huge difference dropped my normal oil temp 30-40 degrees depending on how aggressive I was driving. Used to run around 225-240 degrees now stays around 180-190 degrees. Aggressive driving pushes it to 220. Used for about 15,000 miles. I will send install instructions that came with cooler. Good DIY instructions on this forum as well. Paid $640 new. Asking $475 + paypal fee and shipping. Attachment 90717 Attachment 90718 Stillen Gen2 Air intake with Z1 motorsports silicone breather hoses. Used for about 25,000 mi. Filters have been cleaned twice and I will clean them before shipping so you can quickly install. Installation is easy and I will forward instructions that came with intakes. $250 + pay pall fee and shipping. [ATTACH]Attachment 90720[/ATTACH] GTR Start Button $25 + pay pal fee and shipping Magnetic Oil drain plug $10 + shipping Attachment 90721 Top Speed Axle back Exhaust - 4.5" beveled edge tip, 2.25" I.D. pipe. These took about 10 mins to install on my Nismo using the factory bolts as the nuts are welded onto to the factory flange. They stick out just a bit more than stock. I will send the factory gaskets if you want to attempt to use them instead of getting new ones from Nissan. These were on the car for 14 months (13,000 miles). Plenty of sound clips online. In my opinion, they are a little too loud inside the car (my kids disagree) but, everyone else says they sound awesome outside the car. There is a slight drone nearing 4,000 RPM's then once load evens out it is noticeably softer. They were definitely worth the price to see what type of exhaust sound I like rather than spend $1,300 and not care for the sound. There is one tiny dent (size of eraser) on top of one can which you can not see once mounted. $230 + pay pal fee and shipping. Attachment 90722 Attachment 90723 Front and Rear Nissan "burger" emblems (rear has plasti dip on it which can be peeled off, front is stock) $15 for both. Rear "370Z" letters and rear "Nismo" letters that have been painted black. I have them taped as they came out of foam template. Forum member "CubanZ" currently has the foam templates I sent him to install the letters perfectly. Contact him to get them back....then forward to moderator or someone who can manage them within the forum. Stock Radio/CD player $20. Lastly, I have touch up paint for 2011 Nismo Pearl White base coat and top coat in the little bottles from Nissan. I also just bought base coat and top coat spray cans (1 of each) from "Automotive Touchup" using my paint code. I had planned to attempt masking rock chips and using spray paint along with sandpaper stuck to pencil eraser as the paint sticks don't do a good job. Spray cans have never been used and touchup from Nissan used very little. $30 for all touchup paint. Let me know if you would like more pictures. Thanks!!

07-02-2014, 02:42 AM	#4 (permalink)
Tempestz Enthusiast Member Join Date: Jul 2013 Location: Ewa Beach, HI Posts: 346 Drives: 10-370Z-MB-7AT Rep Power: 12	I want the topspeed axle back. Pm quote shipped to 96706 ewa beach, Oahu, Hawaii __________________ Certified Exhaust Whore

07-02-2014, 03:15 AM	#5 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: Z34, BCNR33, F83 Rep Power: 12	Pm shipped quote for paint to 30308 please. Sent from my Nexus 5 using Tapatalk __________________ \|\| Z1 Intake, U/L Plenum, Headers, Oil Cooler, Two Piece Rotors, SP Diff 3.54 FD, Semi Solid Mounts, Clutch + LW Flywheel + CSC Del \|\| Uprev \|\| A.R.T. Pipes + XYZ Mid Pipe w/ HFC \|\| Tomei CBE \|\| Nismo Sways \|\| BC BR 12k/10K \|\| SPC Arms \|\| Dewla Shroud \|\| Advan RSD \|\|

07-02-2014, 03:43 AM	#6 (permalink)
Kayzee Enthusiast Member Join Date: Jul 2012 Location: New York, NYC Posts: 361 Drives: around Rep Power: 13	Dibs on intakes. Pm price shipped to 10312 please. __________________ 2010 Sport, Magnetic Black Top Speed Pro 1 CBE - Swift Spec R - Stillen Splitter - 35% Tint - Tinted tails - 6k HID -ES113 20x10 20x11

07-03-2014, 05:41 AM	#8 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 22	Willing to to sell just the oil cooler core alone? __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

07-01-2014, 11:34 PM	#2 (permalink)
DarylP Base Member Join Date: Jun 2011 Location: Houston, TX Posts: 29 Drives: 2011 370Z Nismo Rep Power: 14	Here is a pic of air intakes off of car. Stillen Gen2.jpg

07-02-2014, 12:14 AM	#3 (permalink)
dwnchiu Base Member Join Date: Sep 2013 Location: Los Angeles Posts: 32 Drives: 09 Nissan 370z Rep Power: 12	Dibs on the start button

07-07-2014, 02:37 PM	#9 (permalink)
John_Chantal Base Member Join Date: Jun 2013 Location: Stafford Texas Posts: 20 Drives: '12 370Z pearl auto Rep Power: 12	Still available the stillen intake? Sent from my iPhone using Tapatalk

07-30-2014, 02:47 PM	#10 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	do you still have the Top Speed axle back??

07-30-2014, 07:10 PM	#11 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: Z34, BCNR33, F83 Rep Power: 12	Purchased Paint. Everything arrived as described by seller. Ty Daryl. Sent from my Nexus 5 using Tapatalk __________________ \|\| Z1 Intake, U/L Plenum, Headers, Oil Cooler, Two Piece Rotors, SP Diff 3.54 FD, Semi Solid Mounts, Clutch + LW Flywheel + CSC Del \|\| Uprev \|\| A.R.T. Pipes + XYZ Mid Pipe w/ HFC \|\| Tomei CBE \|\| Nismo Sways \|\| BC BR 12k/10K \|\| SPC Arms \|\| Dewla Shroud \|\| Advan RSD \|\|

07-30-2014, 07:51 PM	#12 (permalink)
gumi4680 Base Member Join Date: Feb 2013 Location: Yorba Linda, CA Posts: 73 Drives: 09 370z 6MT Rep Power: 12	Dips on oil cooler. Pm me final pricing shipped to 92887. __________________ -09 370z sport + touring + nav + full amuse body kit + full amuse exhaust + Volk TE37SL SOLD -10 Lexus rx350 -2013 Lexus GS350 f-sport

09-07-2014, 10:26 PM	#13 (permalink)
oero_ballin16 Enthusiast Member Join Date: Nov 2012 Location: valley, la Posts: 301 Drives: 09 370z Rep Power: 13	still have axle back?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Part out - Oil Cooler, air intake, muffler, GTR button, touch up paint	DarylP	Parts for sale (Private Classifieds)	15	07-07-2014 09:14 PM
[WTB] Stillen Gen2 CAI	KraTToR	Parts for sale (Private Classifieds)	0	05-20-2013 08:59 PM
Stillen G3 Intake fit with 34 Row oil cooler?	ichris14	Intake/Exhaust	5	01-21-2011 10:38 AM
Stillen Gen2. intakes???	feelzpwr91	Intake/Exhaust	2	11-02-2009 12:36 PM
is the stillen gen2 intake the same for the g37 as for the 370z	black09Z	Intake/Exhaust	2	06-28-2009 03:08 PM