--- Get your door handles painted --- !!!

phantom370z · 10-05-2014, 09:07 AM

Got the handles last night and overall they look great.

There is 1 small spot on the driver's side handle that has kind of a bump on it, probably some dust under the clear. It isn't something you would really notice unless you got right up on the handle and looked at the exact spot. If it ever bothers me I may do some light wet sanding and polish that spot after 3-4 months when everything has cured...overall it's no big deal. I'll post pics when I get them installed.

Kabestro · 10-05-2014, 09:24 PM

Hey man, If you can, post some pics of the dis-assembly process.

phantom370z · 10-05-2014, 09:37 PM

Quote:

Originally Posted by Kabestro

Hey man, If you can, post some pics of the dis-assembly process.

Sorry, already installed. There are already several DIY threads for removal. I will post pictures tomorrow when I can snap a few.

equalme · 10-06-2014, 08:48 AM

Quote:

Originally Posted by phantom370z

Sorry, already installed. There are already several DIY threads for removal. I will post pictures tomorrow when I can snap a few.

Thanks for the feedback. Unfortunately a piece of dust does make it under the clear occasionally since I don't have a real spray booth. It is easy to take care of as you mentioned with light sanding with 2500-3000 grit and polish. You can actually do it now as it might be a bit harder once fully cured.

How did the color match up to the two tone?

phantom370z · 10-06-2014, 09:08 AM

Quote:

Originally Posted by equalme

Thanks for the feedback. Unfortunately a piece of dust does make it under the clear occasionally since I don't have a real spray booth. It is easy to take care of as you mentioned with light sanding with 2500-3000 grit and polish. You can actually do it now as it might be a bit harder once fully cured.

How did the color match up to the two tone?

I'll be honest man, I'm not sure if it bothers me enough to even worry about it

On a side note, there was one issue with the handle itself, not the paint. I did not end up being able to unhook the blue connector because I don't have the micro-size hands I'd assume you need to do that, so I had to go the swap the button route...and I'm glad I did or I'd never have noticed the problem. Either the previous owner of that core or yourself broke one of the receptors on the left of the metal plate that holds the button in, so when I unscrewed that screw with almost no force, it broke right off. I know it wasn't me because there was glue already there from where whoever tried to glue it down before. I ended up using Gorilla glue for plastic to glue it back on and it was very strong so I'm not really concerned but that was something I was not expecting. I'm not sure if it's going to be an issue in the future with vibrations/bumps/etc but I hope not. Also, I did end up somewhat stripping the screws that hold that plate in on my stock handles but left them up high enough where they can be easily extracted with a small pair of pliers or vice grips. Those screws will need to be replaced so if you need to take the cost of those two screws out of my core charge that's cool. I will ship them back tomorrow once I get into the office.

Now that's it sunny I'll be pulling it out of the garage and comparing the color match later today, I'll keep you posted and post some pictures.

equalme · 10-06-2014, 04:51 PM

Those plastic screw holes are super fragile and snaps like nothing with all the loc-tite used from factory. As long as you were able to tighten it back down without it breaking apart it is pretty much a non-issue. About 1/3 of the cores I receive back I've had to repair them using epoxy. The button will actually hold tight and function with just one screw as well. No worries on the two screws.

phantom370z · 10-06-2014, 06:45 PM

Quote:

Originally Posted by equalme

Those plastic screw holes are super fragile and snaps like nothing with all the loc-tite used from factory. As long as you were able to tighten it back down without it breaking apart it is pretty much a non-issue. About 1/3 of the cores I receive back I've had to repair them using epoxy. The button will actually hold tight and function with just one screw as well. No worries on the two screws.

Yea the button was still working fine when I glued that piece back, I'm not overly concerned.

phantom370z · 10-07-2014, 02:02 PM

Cores shipped back, you should get them in 1-2 days.

EDIT: tracking shows delivered, you should have them.

phantom370z · 10-10-2014, 11:30 PM

So I've taken some time to analyze the paint match and it's pretty much exact. Thanks again equal. Hopefully I can get some decent pics one of these days

equalme · 10-16-2014, 09:35 PM

Just a heads up...I will have two sets of Magnetic Blacks (G41) ready to ship this Monday.

equalme · 10-18-2014, 07:59 PM

Update:
One more set of Magnetic black available.

phantom370z · 10-18-2014, 10:13 PM

Quote:

Originally Posted by equalme

Just a heads up...I will have two sets of Magnetic Blacks (G41) ready to ship this Monday.

Quote:

Originally Posted by equalme

Update:
One more set of Magnetic black available.

I hope someone takes advantage of these.

HBlakeH · 10-18-2014, 10:41 PM

Quote:

Originally Posted by equalme

Update:
One more set of Magnetic black available.

How much?

paratrooper · 10-19-2014, 06:40 AM

I did because this are going to be a collectors item when he stops going them!

Quote:

Originally Posted by phantom370z

I hope someone takes advantage of these.

phantom370z · 10-19-2014, 02:07 PM

Mmm... Matching

10-05-2014, 09:07 AM	#226 (permalink)
phantom370z Track Member Join Date: Dec 2013 Location: South Carolina Posts: 865 Drives: 14 Nismo 370Z PW Rep Power: 13	Got the handles last night and overall they look great. There is 1 small spot on the driver's side handle that has kind of a bump on it, probably some dust under the clear. It isn't something you would really notice unless you got right up on the handle and looked at the exact spot. If it ever bothers me I may do some light wet sanding and polish that spot after 3-4 months when everything has cured...overall it's no big deal. I'll post pics when I get them installed. __________________ 14' Pearl White Nismo 370z - SOLD

10-05-2014, 09:24 PM	#227 (permalink)
Kabestro Enthusiast Member Join Date: Aug 2012 Location: Puerto Rico Posts: 331 Drives: 13 Nissan 370Z MR M6 Rep Power: 40	Hey man, If you can, post some pics of the dis-assembly process. __________________ Stillen Gen 3 CAI / Fast Intentions HFC and CBE 12" Res. (#730) / Swift Springs / 20mm H&R Spacers / Clutch Helper Spring / UpRev Tune 322whp.

10-07-2014, 02:02 PM	#233 (permalink)
phantom370z Track Member Join Date: Dec 2013 Location: South Carolina Posts: 865 Drives: 14 Nismo 370Z PW Rep Power: 13	Cores shipped back, you should get them in 1-2 days. EDIT: tracking shows delivered, you should have them. __________________ 14' Pearl White Nismo 370z - SOLD Last edited by phantom370z; 10-09-2014 at 08:28 AM.

10-10-2014, 11:30 PM	#234 (permalink)
phantom370z Track Member Join Date: Dec 2013 Location: South Carolina Posts: 865 Drives: 14 Nismo 370Z PW Rep Power: 13	So I've taken some time to analyze the paint match and it's pretty much exact. Thanks again equal. Hopefully I can get some decent pics one of these days equalme likes this. __________________ 14' Pearl White Nismo 370z - SOLD Last edited by phantom370z; 10-14-2014 at 11:30 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Painted door handles	big daddy	Exterior & Interior	34	04-12-2022 03:35 PM
Painted Door Handles installed	Kandy OrangeZ	Exterior & Interior	24	07-08-2017 11:18 AM
Group Buy * BC painted door handles*	jlo370z	Group Buys	43	04-15-2014 09:23 PM
Painted the door handles	caneman88	Exterior & Interior	26	05-08-2011 03:01 PM
Getting Door Handles Painted	4r3s	Mid-Atlantic Region	1	10-07-2010 10:40 AM

10-06-2014, 04:51 PM	#231 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	Those plastic screw holes are super fragile and snaps like nothing with all the loc-tite used from factory. As long as you were able to tighten it back down without it breaking apart it is pretty much a non-issue. About 1/3 of the cores I receive back I've had to repair them using epoxy. The button will actually hold tight and function with just one screw as well. No worries on the two screws.

10-16-2014, 09:35 PM	#235 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	Just a heads up...I will have two sets of Magnetic Blacks (G41) ready to ship this Monday.

10-18-2014, 07:59 PM	#236 (permalink)
equalme Track Member Join Date: Feb 2013 Location: Kansas City Posts: 656 Drives: RCF Rep Power: 13	Update: One more set of Magnetic black available.