FS - G37 ZSpeed Undershroud

jwick · 03-21-2014, 10:43 AM

G37 Coupe ZSpeed V1 Undershroud (does not fit a Z)

This is the original version not the one currently for sale on their website. The only difference is the V2 added a little more space on the rear of the tray to allow for oil pan spacer. The pan is in perfect working condition but it is an undershroud so the side facing the road has scuffs and the engine side has a few rub marks. The rub marks are from my sway bar grease fitting and my fumoto valve. None of the rub locations show through or have dented the road side of the pan. All items are detailed in pictures.

$150 shipped to lower 48 states.

SuperDave · 03-21-2014, 12:52 PM

Is this the same for the 370, or will it only fit a G37?

Chuck33079 · 03-21-2014, 12:56 PM

Quote:

Originally Posted by SuperDave

Is this the same for the 370, or will it only fit a G37?

Looks just like mine. I'm sure the OP will check shortly.

jwick · 03-21-2014, 01:49 PM

Quote:

Originally Posted by SuperDave

Is this the same for the 370, or will it only fit a G37?

Joe says no but I'm going to double check hopefully this weekend. As Chuck says they look identical. If it doesn't fit a Z it'll be bumper bolt pattern.

jwick · 03-23-2014, 10:09 PM

Bump and update. Shroud only fits a G37 (coupe or sedan). Test fitted it on a buddy's Z and the bumper bolt pattern is different.

BrandonSS · 03-23-2014, 10:37 PM

Hmm ... Aside from bolt pattern, same shape?

eastwest2300 · 03-23-2014, 11:05 PM

Quote:

Originally Posted by jwick

Bump and update. Shroud only fits a G37 (coupe or sedan). Test fitted it on a buddy's Z and the bumper bolt pattern is different.

damn that sucks...

jwick · 03-24-2014, 12:04 AM

Quote:

Originally Posted by BrandonSS

Hmm ... Aside from bolt pattern, same shape?

The G bumper has more curve to it so the outside is about 1/2-3/4" short. The engine side identical.You could drill holes to make it work but the front two corners would never bolt up to anything cuz its too short

jwick · 03-24-2014, 01:22 PM

Sale pending

shika805 · 03-24-2014, 10:07 PM

i would just fabricate a attachment so it could fit the z. I hate taking out that plastic shroud to chance oil, takes forever!

eastwest2300 · 03-24-2014, 10:34 PM

Quote:

Originally Posted by shika805

i would just fabricate a attachment so it could fit the z. I hate taking out that plastic shroud to chance oil, takes forever!

hell yeah it does... a total pain.

jwick · 03-24-2014, 11:48 PM

I pull the shroud every time I change the oil so I can grease the sway bar

SuperDave · 03-25-2014, 12:13 AM

Quote:

Originally Posted by jwick

I pull the shroud every time I change the oil so I can grease the sway bar

Turn your zerks out, you can hit them just by turning the wheel.

fuct · 03-25-2014, 05:00 PM

i guess the nismo shroud is different than the others because i just unbolt the four bolts circled then bend the plastic back (arrow) and hold it in place with an open end wrench when i change my oil.

jwick · 03-26-2014, 08:52 AM

Quote:

Originally Posted by fuct

i guess the nismo shroud is different than the others because i just unbolt the four bolts circled then bend the plastic back (arrow) and hold it in place with an open end wrench when i change my oil.

That's exactly how my stock pan looks

03-21-2014, 12:52 PM	#2 (permalink)
SuperDave Track Member Join Date: May 2013 Location: Manteca, Nor-Cal Posts: 691 Drives: My Z Daily Rep Power: 13	Is this the same for the 370, or will it only fit a G37? __________________ R2 ZEE 2 Build Journal Upgrade your speakers from BOSE without new wiring, LOC's, or a new head unit.

03-23-2014, 10:09 PM	#5 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Bump and update. Shroud only fits a G37 (coupe or sedan). Test fitted it on a buddy's Z and the bumper bolt pattern is different. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-24-2014, 01:22 PM	#9 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Sale pending __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-24-2014, 10:07 PM	#10 (permalink)
shika805 Enthusiast Member Join Date: Sep 2011 Location: Santa Barbara, CA Posts: 491 Drives: 40th Z, 71' 240z Rep Power: 20	i would just fabricate a attachment so it could fit the z. I hate taking out that plastic shroud to chance oil, takes forever! __________________ 1971 Datsun 240z, 2010 40th Anniversary Z Build #541

03-24-2014, 11:48 PM	#12 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	I pull the shroud every time I change the oil so I can grease the sway bar __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

03-23-2014, 10:37 PM	#6 (permalink)
BrandonSS Track Member Join Date: Apr 2013 Location: Indianapolis Age: 42 Posts: 644 Drives: 2009 370z T/S/techM6 Rep Power: 13	Hmm ... Aside from bolt pattern, same shape?

03-25-2014, 05:00 PM	#14 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	i guess the nismo shroud is different than the others because i just unbolt the four bolts circled then bend the plastic back (arrow) and hold it in place with an open end wrench when i change my oil.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] OEM Nismo Undershroud	dmhenderson	Parts for sale (Private Classifieds)	1	04-20-2014 11:49 PM
[WTB] Base Undershroud / Engine Splash Guard	squib	Parts for sale (Private Classifieds)	3	03-09-2014 02:42 PM
[WTB] AAM Oil Pan Spacer, Z1 NISMO undershroud, *Mishimoto radiator	dmhenderson	Parts for sale (Private Classifieds)	4	11-05-2013 06:22 PM
[FOR SALE] Z Speed Aluminum Undershroud (370z)	AUtigers370z	Parts for sale (Private Classifieds)	1	06-02-2012 01:09 PM
370Z ZSpeed Undershroud Group Buy	Chuck@Z1	Body Interior/Exterior	42	03-06-2011 10:49 PM