Freebies Thread

Bullit79 · 03-28-2014, 01:17 PM

Finished my rear fog install and got some extra stuff laying around.

First, Z1 Motorsports Long Harness, new in package GONE. Ended up not using it because I did a 7443 bulb install.

Second, I have a modded 7443 bulb socket GONE. It's been dremeled to fit in the JDM fog light assembly. I ordered two sockets for the install. After I cut the first one, it fit okay but I thought I could do better. The one I'm giving away is the first cut. As you can see from the pics, it does engage the locking tab. Not sure how secure it is, but that's why I cut the second one.

And in case anyone is wondering, here's the DIY for the 7443 bulb install
Rear Fog Light-Help!!!

jdsto · 04-01-2014, 07:59 PM

****going to zakimak on Easter weekend*******

I have a OEM Headunit from 2011 370z, free to good home.

Preference is for a local give away in the GTA, to save shipping costs and packaging.

Sorry if the photos suck they were taken with my ipad

zakimak · 04-02-2014, 09:27 AM

Quote:

Originally Posted by jdsto

****going to zakimak on Easter weekend*******

I have a OEM Headunit from 2011 370z, free to good home.

Preference is for a local give away in the GTA, to save shipping costs and packaging.

Sorry if the photos suck they were taken with my ipad

I feel like a hoarder...I'll get in touch with AK for your premium

zefaulter · 04-02-2014, 11:10 AM

Quote:

Originally Posted by Bullit79

Finished my rear fog install and got some extra stuff laying around.

First, Z1 Motorsports Long Harness, new in package. Ended up not using it because I did a 7443 bulb install.

Second, I have a modded 7443 bulb socket. It's been dremeled to fit in the JDM fog light assembly. I ordered two sockets for the install. After I cut the first one, it fit okay but I thought I could do better. The one I'm giving away is the first cut. As you can see from the pics, it does engage the locking tab. Not sure how secure it is, but that's why I cut the second one.

Pics attached.

And in case anyone is wondering, here's the DIY for the 7443 bulb install
Rear Fog Light-Help!!!

I'll take the socket if you still have it. Do you need new bulb for it or is the Z1 bulb ok?

Bullit79 · 04-02-2014, 01:09 PM

Quote:

Originally Posted by zefaulter

I'll take the socket if you still have it. Do you need new bulb for it or is the Z1 bulb ok?

No, you need to buy a 7443 bulb, which is a dual filament bulb. The rear fog comes with a single filament bulb (7440). If you use the 7440, then the bulb will only light up bright (no low light output).

Footloose301 · 04-01-2014, 09:20 PM

^thats a BOSE headunit. Pretty sure it needs the amps in order to work if somebody is looking to upgrade.

If their Z has a BOSE that doesn't work then perhaps it'll swap right over

cooltoy · 04-02-2014, 10:24 AM

Now I know why you started this thread.

jlo370z · 04-02-2014, 01:19 PM

this thread cost me 8 dollars lol, we live we learn

FPenvy · 04-07-2014, 08:24 AM

anyone have a spare ipod connector for their Z they wanna part with?

Z Stig · 04-07-2014, 08:48 AM

Quote:

Originally Posted by FPenvy

anyone have a spare ipod connector for their Z they wanna part with?

Do you need the Aux cable that has the headphone type connector on both ends, or the USB to phone connector? Also, which iPhone do you have?

I have some extras of each type for the iPhone 4 and 5 that I can spare.

FPenvy · 04-07-2014, 09:02 AM

Quote:

Originally Posted by Z Stig

Do you need the Aux cable that has the headphone type connector on both ends, or the USB to phone connector? Also, which iPhone do you have?

I have some extras of each type for the iPhone 4 and 5 that I can spare.

i have a 4S and its the usb connector for the bottom that came with the touring nav edition. the 2 prongs that grip the connection point are bad. wont "click in" anymore so sometimes when i turn it just lets go and disconnects on me. very annoying.

just with that weird connection in the center console i'm not sure what i would even need or if there is anything aftermarket for it. figured i would need another OEM type of one.

Z Stig · 04-07-2014, 11:48 AM

Quote:

Originally Posted by FPenvy

i have a 4S and its the usb connector for the bottom that came with the touring nav edition. the 2 prongs that grip the connection point are bad. wont "click in" anymore so sometimes when i turn it just lets go and disconnects on me. very annoying.

just with that weird connection in the center console i'm not sure what i would even need or if there is anything aftermarket for it. figured i would need another OEM type of one.

I got 'cha covered. Send me a PM with an address to mail it to, or come to the MAZOC meet this weekend and I can give it to you there. Either works for me.

FPenvy · 04-07-2014, 12:20 PM

Quote:

Originally Posted by Z Stig

I got 'cha covered. Send me a PM with an address to mail it to, or come to the MAZOC meet this weekend and I can give it to you there. Either works for me.

let me check my schedule to see i can make it this weekend if not i'll send you a pm with my address later once i know for sure.

horty24 · 04-23-2014, 09:38 PM

I got a front license plate holder. I don't need one in west va. So it's just sitting in my garage. Let Me know If anyone needs it.

Nissanboy · 04-23-2014, 10:52 PM

Quote:

Originally Posted by horty24

I got a front license plate holder. I don't need one in west va. So it's just sitting in my garage. Let Me know If anyone needs it.

Damn and I just bought one too..

03-28-2014, 01:17 PM	#1 (permalink)
Bullit79 Base Member Join Date: Feb 2013 Location: TX Posts: 140 Drives: '12 370Z GM 7AT Rep Power: 13	Finished my rear fog install and got some extra stuff laying around. First, Z1 Motorsports Long Harness, new in package GONE. Ended up not using it because I did a 7443 bulb install. Second, I have a modded 7443 bulb socket GONE. It's been dremeled to fit in the JDM fog light assembly. I ordered two sockets for the install. After I cut the first one, it fit okay but I thought I could do better. The one I'm giving away is the first cut. As you can see from the pics, it does engage the locking tab. Not sure how secure it is, but that's why I cut the second one. And in case anyone is wondering, here's the DIY for the 7443 bulb install Rear Fog Light-Help!!! Last edited by Bullit79; 11-24-2014 at 07:42 AM. Reason: Harness Gone

04-01-2014, 09:20 PM	#6 (permalink)
Footloose301 A True Z Fanatic Join Date: Apr 2010 Location: Naples, FL Posts: 2,659 Drives: 40th Rep Power: 22	^thats a BOSE headunit. Pretty sure it needs the amps in order to work if somebody is looking to upgrade. If their Z has a BOSE that doesn't work then perhaps it'll swap right over __________________ 2010 40th Anniversary 370Z

04-02-2014, 01:19 PM	#8 (permalink)
jlo370z Im a Fireball Join Date: Apr 2012 Location: Ill in noise Posts: 3,370 Drives: 11 370z Red 6spd Rep Power: 43427	this thread cost me 8 dollars lol, we live we learn __________________ ❝The Jlo370Z Build❞ 523HP \| 455 ftb tq \| 11.5 PSI \| 93 Octane *2017 Porsche 991.2 C4!l*

04-23-2014, 09:38 PM	#14 (permalink)
horty24 Base Member Join Date: Mar 2014 Location: wv Age: 48 Posts: 116 Drives: 2009 370Z Touring Sp Rep Power: 3367	I got a front license plate holder. I don't need one in west va. So it's just sitting in my garage. Let Me know If anyone needs it. __________________ 2000 Celica gts: daily beater 2007 GMC Acadia: family ship 2009 370Z: sunny day delight

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The official: oops i started a "Steering lock recall!!!" Thread; thread	AWSneer	Nissan 370Z General Discussions	31	06-04-2013 10:23 PM
ANOTHER oil thread	edub370	Engine & Drivetrain	13	05-05-2012 10:55 AM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
another should I thread	debogard2	Nissan 370Z Pricing / Ordering Discussions	14	03-25-2010 03:54 PM

04-02-2014, 10:24 AM	#7 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,983 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Now I know why you started this thread.