02-11-2011, 12:19 PM
|
#16 (permalink)
|
|
Base Member
Join Date: Feb 2010
Location: Tennessee
Posts: 23
Drives: '09 Nissan 370Z 6MT
Rep Power: 15
|
Quote:
Originally Posted by Cjanik
it uses the stock wiring harness. I dont make anything up, this is all stuff straight from the factory, so its plug and play. if you have illuminated kick plates allready, there's just a plug you disconnect/reconnect about 1 foot from the kick panels. If you dont have them, then there's a stock plug you unplug, and then connect this new plug into (included in the kit) - and run 1 wire to the passanger side and 1 wire to the drivers side. From there, you plug the kickpanels into the wire you ran.
very easy, just zip tie the wires under the dash, or stick them behind the carpet (instruction manual that comes with it says to do that from nissan).
|
do you have to take the kick plates off to find that wiring? i want to tap into the wiring to hook up my LED strips i got for some footwell lighting when the doors open.
|
|
|
Similar Threads
Linear Mode
