4.08 gears

Skorch

I have 4.08 gears for sale. These are arguably the most substantial N/A performance mod you can get, and will definitely have you grinning as soon as you install them. I loved having them on my Z - you can feel the acceleration increase in every gear and at all speeds.

I had these on my 6MT + Sport package. I didn't notice any changes to the cruise control, but the rev-matching was off by about 200 rpm (you just need to let go of the clutch slightly slower to compensate when downshifting)

As far as 7AT guys - here is a good review thread:

4.08 Gear Install (7AT) Review

Update: I looked through my box with the gears and found that I have the pinion bearing and the pinion oil seal which are in great shape. I will include them as part of the sale, along with an extra full bottle of Redline 75W90 gear oil which I didn't end up using.

What is NOT included in this sale are the side oil seals and the crush sleeve. These items can be ordered from your local Nissan parts dealer or online such as Courtesy Parts. Also not included are the side bearings, but I was told that they are same as stock and therefore can be reused from what is already in there.

Pic of all the stuff attached.

$450 + shipping

Attached Images

IMG_8236.JPG (114.6 KB, 131 views)

__________________
'12 370Z + Sport | Stillen Gen3 Intakes | Stillen UD Pulley | Motordyne M370 | FI Exhaust | FI HFCs | 4.08 Gears | Uprev tuned

logenl7

How much does the deal kit normally run that coincides with the gears?!? $275?

Skorch

I ordered a new crush sleeve and the seals for under $30 total (buddy works at Toyota so he hooked me up with dealer cost)

I'm still not sure why you can't just reuse the stock bearings - they looked identical. Reason I'm not including bearings in the sale is because the rollers on one of them were starting to get pitted which caused a whining noise later on.

__________________
'12 370Z + Sport | Stillen Gen3 Intakes | Stillen UD Pulley | Motordyne M370 | FI Exhaust | FI HFCs | 4.08 Gears | Uprev tuned

logenl7

I'd be all over this if I could get the bearings, crush sleeve and seals cheap lol

chrischhorn

i want these so bad.... to bad no one on the island i can trust to install :-(

__________________

R.I.P. 8/01/13 1SlowZ
One day I'll have another....

Skorch

Updated original post with a pic and added the extra stuff I'm including with the sale.

There has to be a Nissan dealership on your island - have them do it!

__________________
'12 370Z + Sport | Stillen Gen3 Intakes | Stillen UD Pulley | Motordyne M370 | FI Exhaust | FI HFCs | 4.08 Gears | Uprev tuned

gtabaz

i want this so bad right now! gl with sale

Skorch

So get it!

__________________
'12 370Z + Sport | Stillen Gen3 Intakes | Stillen UD Pulley | Motordyne M370 | FI Exhaust | FI HFCs | 4.08 Gears | Uprev tuned

Onelownismo

Any idea what a shop would charge to do the install?

Skorch

I don't, sorry.. I installed these with my buddy who is a mechanic at Totoya and it took us about 4-5 hours with beers and bs and such, if that helps

__________________
'12 370Z + Sport | Stillen Gen3 Intakes | Stillen UD Pulley | Motordyne M370 | FI Exhaust | FI HFCs | 4.08 Gears | Uprev tuned

Skorch

Bump

__________________
'12 370Z + Sport | Stillen Gen3 Intakes | Stillen UD Pulley | Motordyne M370 | FI Exhaust | FI HFCs | 4.08 Gears | Uprev tuned

RITDR

I just did my 4.08 install this weekend at my buddy's shop (with a press and impact tools) and it only took a little over 4 hrs.

Saltee

take it to real auto dynamics in oceanside.. or vinny ten racing in west babylon... you can definitely trust either of them.

chrischhorn

I think you misunderstood what I meant.....I'm in Hawaii....on an island....not Long Island such as yourself lol.

__________________

R.I.P. 8/01/13 1SlowZ
One day I'll have another....

killergx001

is there any way to adjust the rev matching after replacing the gears?