Greddy EVAP re-locator please

chrislee · 07-31-2012, 07:42 PM

Hello,

So I recently purchased a Greddy Ti-C exhaust from another member on this forum but he didn't know that this exhaust was supposed to come with an EVAP relocator (metal bracket thing).

If the Exhaust is hitting the EVAP will it melt?

Is this EVAP relocator necessary?

Please let me know. (any suggestions would be awesome too)

Thank you!

-Chris

MattP725 · 07-31-2012, 08:17 PM

Box wont melt but it WILL rattle... remove the box, there should be plenty of clearance... that is what I did and I had no problems.

chrislee · 07-31-2012, 10:01 PM

Thanks for the info Matt.

Any other members tried Matt's way by simply removing the plastic box?

Please let me know. Thank you~

chrislee · 08-01-2012, 01:33 AM

Bump please~

DEpointfive0 · 08-01-2012, 04:23 AM

If you REALLY want it, I believe that Tony at Fast intentions makes something for you... I think it might be Nismo only though... Also, of it is just touching, you don't need it, if it's touching it'll just rattle unless you put a spacer there... I used header wrap with a thin piece of aluminum wrapping that so the wrap wouldn't get worn out

zakimak · 08-01-2012, 11:03 AM

Had the same issue so I fab one.

Greddy Evap Bracket Dimension

You will also need to extend two hoses. 3/8" ID tubing if I recalled correctly, about 15" long in place of one of the tube and take the replaced tube and replace the other. This method omits the needed junction.

07-31-2012, 07:42 PM	#1 (permalink)
chrislee Base Member Join Date: Mar 2012 Location: cerritos, california Posts: 60 Drives: 2012 Nissan 370Z Rep Power: 13	Greddy EVAP re-locator please Hello, So I recently purchased a Greddy Ti-C exhaust from another member on this forum but he didn't know that this exhaust was supposed to come with an EVAP relocator (metal bracket thing). If the Exhaust is hitting the EVAP will it melt? Is this EVAP relocator necessary? Please let me know. (any suggestions would be awesome too) Thank you! -Chris Last edited by chrislee; 09-22-2012 at 03:31 PM. Reason: wrong picture.

08-01-2012, 11:03 AM	#6 (permalink)
zakimak 6/2/80 - 9/29/14 - RIP Lukas Join Date: Jun 2011 Location: Ottawa, Ontario Posts: 450 Drives: ZR; Q45; VTR1K, GT65 Rep Power: 17	Had the same issue so I fab one. Greddy Evap Bracket Dimension You will also need to extend two hoses. 3/8" ID tubing if I recalled correctly, about 15" long in place of one of the tube and take the replaced tube and replace the other. This method omits the needed junction. __________________ What doesn't kill you might make you a cripple so chose wisely. Free Stuff for Premium Members - Yeah Really

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] 370z evap 2009	L33T Z34	Parts for sale (Private Classifieds)	3	09-22-2013 12:48 PM
Greddy Ti-C EVAP HELP! SORRY :(	chrislee	Intake/Exhaust	9	12-19-2012 04:29 PM
Greddy Evap Bracket Dimension	zakimak	Intake/Exhaust	6	08-01-2012 09:19 AM
Removing EVAP Conister	SPOHN	Intake/Exhaust	2	02-01-2012 07:40 PM
Tsb: 1998-later all nissan models; evap leak dtc diagnosis	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	0	02-08-2010 09:58 PM

07-31-2012, 08:17 PM	#2 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 17	Box wont melt but it WILL rattle... remove the box, there should be plenty of clearance... that is what I did and I had no problems.

07-31-2012, 10:01 PM	#3 (permalink)
chrislee Base Member Join Date: Mar 2012 Location: cerritos, california Posts: 60 Drives: 2012 Nissan 370Z Rep Power: 13	Thanks for the info Matt. Any other members tried Matt's way by simply removing the plastic box? Please let me know. Thank you~

08-01-2012, 01:33 AM	#4 (permalink)
chrislee Base Member Join Date: Mar 2012 Location: cerritos, california Posts: 60 Drives: 2012 Nissan 370Z Rep Power: 13	Bump please~

08-01-2012, 04:23 AM	#5 (permalink)
DEpointfive0 A True Z Fanatic Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17152	If you REALLY want it, I believe that Tony at Fast intentions makes something for you... I think it might be Nismo only though... Also, of it is just touching, you don't need it, if it's touching it'll just rattle unless you put a spacer there... I used header wrap with a thin piece of aluminum wrapping that so the wrap wouldn't get worn out