Greddy EVAP re-locator please
 

Hello,

So I recently purchased a Greddy Ti-C exhaust from another member on this forum but he didn't know that this exhaust was supposed to come with an EVAP relocator (metal bracket thing).

If the Exhaust is hitting the EVAP will it melt?

Is this EVAP relocator necessary?

Please let me know. (any suggestions would be awesome too)

Thank you!

-Chris

Box wont melt but it WILL rattle... remove the box, there should be plenty of clearance... that is what I did and I had no problems.

Thanks for the info Matt.

Any other members tried Matt's way by simply removing the plastic box?

Please let me know. Thank you~ :)

Bump please~

If you REALLY want it, I believe that Tony at Fast intentions makes something for you... I think it might be Nismo only though... Also, of it is just touching, you don't need it, if it's touching it'll just rattle unless you put a spacer there... I used header wrap with a thin piece of aluminum wrapping that so the wrap wouldn't get worn out

Had the same issue so I fab one.

http://www.the370z.com/intake-exhaus...dimension.html

You will also need to extend two hoses. 3/8" ID tubing if I recalled correctly, about 15" long in place of one of the tube and take the replaced tube and replace the other. This method omits the needed junction.