Tein Mono Sport
 

SOLD
Selling a set of Tein Mono Sport coilover
https://www.z1motorsports.com/coilov...37-p-3983.html


IMO these are probably one of the best coilovers for track performance you can get for under $2000. It performs better than my KW v3 on track and performs better on both street and track compare to the stock nismo coilover.

used for less than a year (5 track days, about 5000 miles)

reason for sell: they are not up to the performance level I want. Upgrade to a custom build Ohlins TTX

http://www.the370z.com/members/gsg74...018-205523.jpg

Pros/cons to these? What performance level were you looking for that these couldn't reach?

I believe the Tein’s are rebound adjustable only. His new setup will be at least compression and rebound independently adjustable, if not a 3 or 4 way (high/low speed compression/rebound) for even finer tuning.

Pros:
- Good quality and performance for the money.
- Strong linear track ready spring rate 14kg/mm front and 12kg/mm rear. (unlike KW v3 soft variable spring rate that oriented towards street use)
- Street compliance is better than OEM.

Cons:
- It's built for a relatively low price point.
- As above mentioned it's one way adjustable. (one knob to adjust compression and rebound at the same time)
- It has no chance to compete with a $7000+ or even $10000+ 3way or 4way setup, such as JRZ Moton

This a track car and running with 295 full slick square. Tein's spring rate and valving is not bad, but far beyond enough for competition use. Ideally a track car should have a natural frequency above 2.0HZ, which on our car converts to a spring rate and valving above 18kg/mm(1000 lb/inch) front (rear depends on where the spring is) . None of the pre-built coilovers on the market reaches such level.

Man, if I didn't just drop $1,100 for ECUtek + custom tune I'd pick these up. If you still have them in January, let me know.

bump for these. I also have a set of Mono Sport on my G37. Done autocross on it and its great.

great price also.

Thanks for your interest. Feel free to check back with me in Jan, parts goes pretty slow here.

bump