76mm big bore throttle bodie kit

Triggzz · 12-22-2020, 01:25 PM

TRIGGASPEC big bore 76mm throttle body kit, Comes with eveything you will need!!

2 x 76mm TB
1x pig tale harness
2x Tb spacers
8x TB hardware
8x spacer hardware

Notrigga@gmail.com

858-722-3392

Sent from my SM-N975U1 using Tapatalk

Triggzz · 12-22-2020, 01:26 PM

$560 shipped

Sent from my SM-N975U1 using Tapatalk

scope22 · 12-22-2020, 03:03 PM

ok...is this supposed to work on 370z? anyone tried it?

GameTheory · 12-22-2020, 04:20 PM

Following for when my bank doesn't hate me after holiday shopping

SG4247 · 12-22-2020, 06:23 PM

Looks like all the right parts to me.

Good deal too!

fatso666 · 12-23-2020, 09:58 AM

what happens if you install them just like that with no tune?

SG4247 · 12-23-2020, 07:05 PM

I did that, and it was fine. But the idle was not perfect.

However, my car was remote tuned and so I have Ecutek on my laptop.

So, I used the Ecutek software to perform the idle learn, and the motor was happy. Real easy.

This idle learn process can be done without Ecutek, but it may be difficult manually - and might need a trip to the dealer to complete the idle learn process.

I did not see much change in the AFR after install, so I did not retune it just for TB’s.

Your situation may be different.

fatso666 · 12-28-2020, 12:08 PM

thank you for the info, and what kind of intake should i use with this setup?

SG4247 · 12-28-2020, 03:07 PM

I have the Stillen Gen2 intake.

That intake works fine, but I did have to purchase a new set of silicone couplers to go from the intake tube to the TB. Ordered them from Summit. I can get you the part number if needed.

I wish I had a nice 3” intake set up like Admin or AAM, but I dont.

Jmatchley86 · 12-28-2020, 06:43 PM

I think this paired with a 3 inch intake will give you some numbers vs the Gen2 stillens.

Spooler · 01-09-2021, 07:10 PM

What car do these throttle bodies normally come on? I am interested but I need some more details.

G wishing Z · 01-10-2021, 09:25 PM

Quote:

Originally Posted by Spooler

What car do these throttle bodies normally come on? I am interested but I need some more details.

Maybe a maxima 🤔

Triggzz · 01-16-2021, 10:15 PM

Quote:

Originally Posted by scope22

ok...is this supposed to work on 370z? anyone tried it?

Yes I have had about 15 people now tuned and happy

Sent from my SM-N975U1 using Tapatalk

Triggzz · 01-16-2021, 10:15 PM

Quote:

Originally Posted by GameTheory

Following for when my bank doesn't hate me after holiday shopping

Hit me up

Sent from my SM-N975U1 using Tapatalk

Triggzz · 01-16-2021, 10:16 PM

Quote:

Originally Posted by fatso666

what happens if you install them just like that with no tune?

Your car will run but full warm up it will bogg and die.
Each car verys in how they react but best bet is to get returned or tuned if your stock to see maximum result

Sent from my SM-N975U1 using Tapatalk

12-22-2020, 01:25 PM	#1 (permalink)
Triggzz Base Member Join Date: Jun 2018 Location: CA Posts: 115 Drives: 2016 nissan 370z 7AT Rep Power: 7	76mm big bore throttle bodie kit TRIGGASPEC big bore 76mm throttle body kit, Comes with eveything you will need!! 2 x 76mm TB 1x pig tale harness 2x Tb spacers 8x TB hardware 8x spacer hardware Notrigga@gmail.com 858-722-3392 Sent from my SM-N975U1 using Tapatalk elhombre likes this.

12-22-2020, 03:03 PM	#3 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	ok...is this supposed to work on 370z? anyone tried it? Triggzz likes this.

12-22-2020, 04:20 PM	#4 (permalink)
GameTheory Base Member Join Date: Nov 2016 Location: Long Island, NY Posts: 27 Drives: 09 370z MB 7AT Rep Power: 9	Following for when my bank doesn't hate me after holiday shopping Triggzz likes this.

12-22-2020, 06:23 PM	#5 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	Looks like all the right parts to me. Good deal too! Triggzz likes this. __________________ NA on E85 - 12.402 @ 112 mph 100 shot E85 - 11.589 @ 117 mph JWT C2 cams rev Base Circle & Titan Valves

12-23-2020, 09:58 AM	#6 (permalink)
fatso666 Base Member Join Date: May 2020 Location: Florida Posts: 78 Drives: 370z 2009 RSX 2003 Rep Power: 5	what happens if you install them just like that with no tune? Triggzz likes this. Last edited by fatso666; 12-23-2020 at 10:01 AM.

12-22-2020, 01:26 PM	#2 (permalink)
Triggzz Base Member Join Date: Jun 2018 Location: CA Posts: 115 Drives: 2016 nissan 370z 7AT Rep Power: 7	$560 shipped Sent from my SM-N975U1 using Tapatalk

12-23-2020, 07:05 PM	#7 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	I did that, and it was fine. But the idle was not perfect. However, my car was remote tuned and so I have Ecutek on my laptop. So, I used the Ecutek software to perform the idle learn, and the motor was happy. Real easy. This idle learn process can be done without Ecutek, but it may be difficult manually - and might need a trip to the dealer to complete the idle learn process. I did not see much change in the AFR after install, so I did not retune it just for TB’s. Your situation may be different. Jmatchley86 and Triggzz like this. __________________ NA on E85 - 12.402 @ 112 mph 100 shot E85 - 11.589 @ 117 mph JWT C2 cams rev Base Circle & Titan Valves

12-28-2020, 12:08 PM	#8 (permalink)
fatso666 Base Member Join Date: May 2020 Location: Florida Posts: 78 Drives: 370z 2009 RSX 2003 Rep Power: 5	thank you for the info, and what kind of intake should i use with this setup? Triggzz likes this.

12-28-2020, 03:07 PM	#9 (permalink)
SG4247 Track Member Join Date: Oct 2016 Location: OKC Posts: 786 Drives: 2010 touring Rep Power: 7842	I have the Stillen Gen2 intake. That intake works fine, but I did have to purchase a new set of silicone couplers to go from the intake tube to the TB. Ordered them from Summit. I can get you the part number if needed. I wish I had a nice 3” intake set up like Admin or AAM, but I dont. Triggzz likes this. __________________ NA on E85 - 12.402 @ 112 mph 100 shot E85 - 11.589 @ 117 mph JWT C2 cams rev Base Circle & Titan Valves

12-28-2020, 06:43 PM	#10 (permalink)
Jmatchley86 Base Member Join Date: Jan 2017 Location: Fort Worth Posts: 159 Drives: 2011 370z 6MT Rep Power: 8	I think this paired with a 3 inch intake will give you some numbers vs the Gen2 stillens. Triggzz likes this.

01-09-2021, 07:10 PM	#11 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,832 Drives: 2013 Nismo 370z Rep Power: 2684392	What car do these throttle bodies normally come on? I am interested but I need some more details. Triggzz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] EPS Big Bore Throttle Bodies for sale or possible trade	NismoJohnG	Parts for sale (Private Classifieds)	8	06-08-2019 09:46 PM
[FOR SALE] EPS Big Bore Throttle Bodies	CJBinder	Parts for sale (Private Classifieds)	5	05-17-2018 06:53 PM
[WTB] Looking for Big Bore Throttle Body Kit	nafir alvarez	Parts for sale (Private Classifieds)	0	04-20-2018 12:49 AM
[FOR SALE] Eps big bore vhr throttle body kit	ajcool2	Parts for sale (Private Classifieds)	13	09-15-2016 04:53 PM
[FOR SALE] EPS 70mm BIG BORE VHR throttle body kit	Dieselg37s	Parts for sale (Private Classifieds)	2	04-28-2016 01:15 PM