370Z Roadster Touring Seats (Heated/Cooling)

DreamN

Location: 91344 Granada Hills, CA
Price: SOLD

Shipping at buyer's expense.

These were pretty much brand new take offs. Think there was less than 1k miles before removed. Little to almost no wear.

Included will be the oem switch with a cut harness on it.

These are power seats with heating & cooling option. Worked perfectly when removed & haven't been used since.

Unfortunately due to storing them improperly the passenger seat had something leaning into it for a good amount of time and caused a noticeable indentation. Also, driver side has a small scuff on the side near left bolster.

Attached Images

	20200810_032120.jpg (286.8 KB, 46 views)
	20200810_032315.jpg (310.3 KB, 41 views)

Chindian01

Strange how that mark looks slightly like Alaska. Try some light heat and rubbing the leather in the area the dent is in. I had a similar situation and heat made it dissappear completely. Yours is a lot deeper, but it could make it less noticeable at the least

Sent from my SM-G973U using Tapatalk

DreamN

LoL interesting, I kinda see what you're seeing in the shape.

I honestly haven't bothered to try fixing it. Buddy mentioned the same about trying heat and gently massaging it. If they don't sell I might finally do something about it.

TacoSport10

I’ve always wondered if these would fit into a coupe and give the capability to have heated and cooled seats.

Wish you were on the east coast.

DreamN

I don't think the mounting points would be any different, but if anyone local with a coupe wants to test fit so I can grab a few shots that would be great.

As far as function goes, I'm sure it's possible with enough patience and a some reading of the FSM.

I know USPS/FedEx/UPS are all super expensive for items this big, but if you have a Greyhound station near you, that's a much cheaper option. Downside is you must pick up at the station.

I've done several shipping quotes for ***** & giggles & it can be done for around $100 for both seats.

Ghostvette

The seats should be basically 'plug & play' for any version except the Nismo. The wiring harness is already in the car. The FSM will be helpful, as you have to add a couple of relays & a couple of fuses IIRC.

I'd buy these if I was closer or going to SoCal in the next 30 days. GLWS.

__________________
2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

cv129

I believe someone here tried it long long time ago. These seats are taller (headrest). If I remember correctly, it’s either a very very snug fit, doesn’t fit, or it fits only up to a certain angle.

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

DreamN

Meet half way? lol I'm always up for a road trip.

Didn't know there was a height difference in the seats. That's interesting. Any chance you know the coup seat height? I can measure these so folks are aware of a difference, if any.

Ghostvette

I'd be up for a road trip, but I'm in the dog house atm.


I'll measure my seats during lunch & post up the numbers.

__________________
2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

Ghostvette

With the head rest up on the 2nd notch, about 39" tall.

__________________
2015 Magma Red 6MT Sport Tech/2012 Fairlady MB 6MT Base (RIP 08032018)https://www.nicoclub.com/FSM/370Z/Coupe/

DreamN

Thank you.

I'm measuring 37.25" with seats reclined at a comfortable position (exact position shown in original photos) & the headrest all the way down.

I'll upload shots with tape measure.

DreamN

Been trying to upload new photos, but to large to attach & each time I try to edit the OP the text saves, but no images.


Edit: figured it out and added pictures to original post.

DreamN

Willing to deliver within a certain distance.

Thirteen

would you sell the adjustment switch on drivers seat

DreamN

Sorry bud, not looking to partout any pieces off these.