VQ37 Built short block

Nismo_256 · 07-19-2020, 07:36 PM

I have for sale my VQ37VHR built short block (so no heads). The block was cleaned, decked and bored to 96mm with a torque plate. Crank was cleaned, polished and checked for straightness. Weisco 96mm pistons w/factory compression and BC forged rods. Assembled with all new Nissan bearings. Rotating assembly was fully balanced. All machine work, measurements and assembly was performed by Mazworx in Sanford, FL. They are a great shop with an amazing reputation as engine builders. Built botom end also comes with full Nissan engine gasket kit, new water pump, new oil pump, arp head studs and main studs. (main studs installed). If you have any questions or need any additional information contact me at any time.

SOLD

Wuero370z · 07-20-2020, 09:55 AM

Not interested in buying, but may I ask why you’re selling?

Sent from my iPhone using Tapatalk

Nismo_256 · 07-20-2020, 01:14 PM

Quote:

Originally Posted by Wuero370z

Not interested in buying, but may I ask why you’re selling?

Sent from my iPhone using Tapatalk

I can give you the shortversion because it was a rough road getting to this decision. Basically I hit a point where I do not want to spend the money anymore on the build. The largest reason at this point is I will have a newborn here in the next couple weeks. But that has been the number one question lol.

Wuero370z · 07-20-2020, 01:55 PM

Quote:

Originally Posted by Nismo_256

I can give you the shortversion because it was a rough road getting to this decision. Basically I hit a point where I do not want to spend the money anymore on the build. The largest reason at this point is I will have a newborn here in the next couple weeks. But that has been the number one question lol.

Rabbit hole got too deep, no shocker. Does anyone know what kind of power this is good for?

Sent from my iPhone using Tapatalk

Elmo370z · 07-20-2020, 03:54 PM

Quote:

Originally Posted by Wuero370z

Rabbit hole got too deep, no shocker. Does anyone know what kind of power this is good for?

Sent from my iPhone using Tapatalk

I wouldn’t push past 650 if you want to be safe. Still an open deck. Yes of course you can make over 800whp. The head sealing will be a issue. You can buy a brand new long block for 3k. I would call mazworx and get more details if you’re serious.

Nismo_256 · 07-20-2020, 06:52 PM

Quote:

Originally Posted by Wuero370z

Rabbit hole got too deep, no shocker. Does anyone know what kind of power this is good for?

Sent from my iPhone using Tapatalk

Actually I owned this motor while my car was boosted. It was my insurance for when the motor would eventually blow. So all pricing and parts were expected. My issue has been 2 seperate "professional" shops that have sold me bad heads and a bad motor here in the Tampa area. The shop that sold me a bad motor i currently have a date in small claims court for a breach of contract. And the second that sold me the cylinder heads i had sent to mazworx and they came back as all valves except 1 failing vaccum test. This place states mazworx is wrong and not they heads they sold me. Not exactly a rabbit hole issue just dont care to spend the money when i have a baby coming in the next couple weeks. I own my Nismo outright and i dont mind finishing her at a later time.

Elmo370z · 07-22-2020, 12:12 PM

Quote:

Originally Posted by Nismo_256

Actually I owned this motor while my car was boosted. It was my insurance for when the motor would eventually blow. So all pricing and parts were expected. My issue has been 2 seperate "professional" shops that have sold me bad heads and a bad motor here in the Tampa area. The shop that sold me a bad motor i currently have a date in small claims court for a breach of contract. And the second that sold me the cylinder heads i had sent to mazworx and they came back as all valves except 1 failing vaccum test. This place states mazworx is wrong and not they heads they sold me. Not exactly a rabbit hole issue just dont care to spend the money when i have a baby coming in the next couple weeks. I own my Nismo outright and i dont mind finishing her at a later time.

Damn man sorry to hear that. That’s why I don’t trust any shops area here in the Tampa area. Mazworx is one of the best in world. My motor is at the shop currently. Free bump

JARblue · 07-22-2020, 05:11 PM

Someone questioning/blaming Mazworx is just an idiot trying to pull one over on you

GLWS

Elmo370z · 07-22-2020, 08:26 PM

Quote:

Originally Posted by JARblue

Someone questioning/blaming Mazworx is just an idiot trying to pull one over on you

GLWS

Lol right. I would laugh in there face and call them
f u c k I n g idiots. The. To top it off I would build a 7 second VQ then I can take you seriously.

Nismo_256 · 07-24-2020, 01:35 PM

Quote:

Originally Posted by Elmo370z

Lol right. I would laugh in there face and call them
f u c k I n g idiots. The. To top it off I would build a 7 second VQ then I can take you seriously.

Yeah it was ZFever so i didnt believe him at all. Just so everyone knows I at no point have doubted Mazworx for even a second. It has just been other local shops and people that have made me want to put the build on hold for a while.

Elmo370z · 07-24-2020, 03:42 PM

Quote:

Originally Posted by Nismo_256

Yeah it was ZFever so i didnt believe him at all. Just so everyone knows I at no point have doubted Mazworx for even a second. It has just been other local shops and people that have made me want to put the build on hold for a while.

Why on earth would you go to z fever?

Nismo_256 · 07-24-2020, 05:06 PM

Quote:

Originally Posted by Elmo370z

Why on earth would you go to z fever?

He was the only one that had a set of heads near me. They visually looked good but mazworx proved that wrong. Other than that I avoid him at all costs and this is just another example of why.

Elmo370z · 07-24-2020, 07:36 PM

Quote:

Originally Posted by Nismo_256

He was the only one that had a set of heads near me. They visually looked good but mazworx proved that wrong. Other than that I avoid him at all costs and this is just another example of why.

Man I could of found you a set of heads.

Nismo_256 · 07-24-2020, 08:24 PM

Quote:

Originally Posted by Elmo370z

Man I could of found you a set of heads.

Well if the block or turbo kit doesnt sell ill be messaging you in the next couple months lol.

andre81k · 07-25-2020, 12:48 AM

Quote:

Originally Posted by Nismo_256

Well if the block or turbo kit doesnt sell ill be messaging you in the next couple months lol.

PM'd

07-22-2020, 05:11 PM	#8 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Someone questioning/blaming Mazworx is just an idiot trying to pull one over on you GLWS Elmo370z and Nismo_256 like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Getting a built short block, reuse timing chains?	sirnixalot	Engine & Drivetrain	15	12-13-2018 12:09 AM
VQ37 block HP limit?	Snyper	Forced Induction	13	04-28-2016 09:34 PM
Bare Block, Short Block, and Engine Assy-Great Prices!!!	FBNISSAN	Drivetrain/Engine	31	12-01-2015 01:17 PM
[FOR SALE] VQ37 Long Block	DaveyJones	Parts for sale (Private Classifieds)	4	10-30-2012 06:22 AM
FS: Brand New VQ37 long block	nexus4400	Parts for sale (Private Classifieds)	1	09-30-2010 11:51 PM

07-20-2020, 09:55 AM	#2 (permalink)
Wuero370z Enthusiast Member Join Date: Nov 2018 Location: Albuquerque Posts: 358 Drives: 2013 Nissan 370z Rep Power: 6717	Not interested in buying, but may I ask why you’re selling? Sent from my iPhone using Tapatalk