TiAL BOV Bottom half (Quiet down Topgunz kit)

NissanTracker · 06-27-2020, 10:53 AM

Hi,

Red, 50mm with 1.5" output.

Went with the TG A-A kit and the TiAL Q was super loud. I purchased a recirculating bottom half part at 2 different places because of COVID delays. Paid 75 with shipping. Yours for 65 shipped including paypal.

https://drive.google.com/file/d/1obi...ew?usp=sharing

Jetsimple · 06-28-2020, 10:55 PM

Can you explain how this quietens down the QRJ? Mine is really loud, and I’ve been trying to figure this out. Thanks

NissanTracker · 06-29-2020, 12:19 PM

Quote:

Originally Posted by Jetsimple

Can you explain how this quietens down the QRJ? Mine is really loud, and I’ve been trying to figure this out. Thanks

This is to turn the TiAL Q to a Tial QR. You can replace the lower part of the Q (non-recirculating) with this bottom half (making it recirculating). Changes the sound, toss a filter on it or add a 1.5" radiator hose and route it back to the engine to suppress the sound.

NissanTracker · 06-30-2020, 03:07 PM

I'll record some video/audio with before and after and a couple different configs in the next day or 2 if that will help others with deciding.

NissanTracker · 07-02-2020, 11:57 AM

bump

btw, i have tomorrow off and will do the sound/vids.

NissanTracker · 07-03-2020, 10:03 AM

Hi,

Here is some vid/sound of the changes I did. I did end up relocating the BOV to the drivers side a bit where I have more room and clears my Nismo bumper better. It is MUCH MUCH quieter for sure, especially when driving. WOT gear changes have tamed down as well, but still loud enough so game can hear ;-)

The Stock setup (Tial Q front bumper)
https://drive.google.com/file/d/1p8V...ew?usp=sharing

Adding the recirc (Tial QR) new location
https://drive.google.com/file/d/1p7m...ew?usp=sharing

Adding a filter
https://drive.google.com/file/d/1p3Q...ew?usp=sharing

NissanTracker · 07-08-2020, 10:17 PM

Bring it up!

1dirtyz · 07-14-2020, 07:34 PM

Quote:

Originally Posted by NissanTracker

Hi,

Here is some vid/sound of the changes I did. I did end up relocating the BOV to the drivers side a bit where I have more room and clears my Nismo bumper better. It is MUCH MUCH quieter for sure, especially when driving. WOT gear changes have tamed down as well, but still loud enough so game can hear ;-)

The Stock setup (Tial Q front bumper)
https://drive.google.com/file/d/1p8V...ew?usp=sharing

Adding the recirc (Tial QR) new location
https://drive.google.com/file/d/1p7m...ew?usp=sharing

Adding a filter
https://drive.google.com/file/d/1p3Q...ew?usp=sharing

Your BOV is installed backwards. I just found this out today. Started losing boost under WOT because the BOV would stay open. Called Tial and they said its on backwards. Drove on it backwards for months lol. The side with the piston should be our outlet for air. Inlet would be where your filter is.

NissanTracker · 07-14-2020, 10:04 PM

Quote:

Originally Posted by 1dirtyz

Your BOV is installed backwards. I just found this out today. Started losing boost under WOT because the BOV would stay open. Called Tial and they said its on backwards. Drove on it backwards for months lol. The side with the piston should be our outlet for air. Inlet would be where your filter is.

I'm interested, explain....

the outlet of air is going out the recirc + filter... thats how the re-circ works

1dirtyz · 07-14-2020, 10:51 PM

Quote:

Originally Posted by NissanTracker

I'm interested, explain....

the outlet of air is going out the recirc + filter... thats how the re-circ works

They even said the instructions tell you to install it the way I described. I switched it around and now it's holding boost no issues at all. Shoot them an email of ya don't believe me

It can be installed the way you have it but it's recommend from them to install it the opposite way.

redondoaveb · 07-14-2020, 10:53 PM

Quote:

Originally Posted by 1dirtyz

Your BOV is installed backwards. I just found this out today. Started losing boost under WOT because the BOV would stay open. Called Tial and they said its on backwards. Drove on it backwards for months lol. The side with the piston should be our outlet for air. Inlet would be where your filter is.

Are you sure you're not thinking of the qrj? The qrj needs to be installed horizontal. The q and qr can only be installed one way.

redondoaveb · 07-15-2020, 01:21 AM

Quote:

Originally Posted by 1dirtyz

They even said the instructions tell you to install it the way I described. I switched it around and now it's holding boost no issues at all. Shoot them an email of ya don't believe me

It can be installed the way you have it but it's recommend from them to install it the opposite way.

You must be talking about the qrj. The attached pic is how it needs to be installed.

1dirtyz · 07-15-2020, 08:16 AM

Quote:

Originally Posted by redondoaveb

You must be talking about the qrj. The attached pic is how it needs to be installed.

I'm talking about the QRJ

redondoaveb · 07-15-2020, 11:29 AM

Quote:

Originally Posted by 1dirtyz

I'm talking about the QRJ

The OP has a QR. Pic of the QR with a silencer.

1dirtyz · 07-15-2020, 12:27 PM

Quote:

Originally Posted by redondoaveb

The OP has a QR. Pic of the QR with a silencer.

Whoops! My bad looked like the QJR from the video

06-27-2020, 10:53 AM	#1 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	TiAL Q->J BOV Bottom half recirc (Quiet down Topgunz kit) Hi, Red, 50mm with 1.5" output. Went with the TG A-A kit and the TiAL Q was super loud. I purchased a recirculating bottom half part at 2 different places because of COVID delays. Paid 75 with shipping. Yours for 65 shipped including paypal. https://drive.google.com/file/d/1obi...ew?usp=sharing redondoaveb likes this. Last edited by NissanTracker; 06-27-2020 at 01:05 PM.

06-30-2020, 03:07 PM	#4 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	I'll record some video/audio with before and after and a couple different configs in the next day or 2 if that will help others with deciding. redondoaveb likes this.

07-02-2020, 11:57 AM	#5 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	bump btw, i have tomorrow off and will do the sound/vids. redondoaveb likes this.

07-03-2020, 10:03 AM	#6 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	Hi, Here is some vid/sound of the changes I did. I did end up relocating the BOV to the drivers side a bit where I have more room and clears my Nismo bumper better. It is MUCH MUCH quieter for sure, especially when driving. WOT gear changes have tamed down as well, but still loud enough so game can hear ;-) The Stock setup (Tial Q front bumper) https://drive.google.com/file/d/1p8V...ew?usp=sharing Adding the recirc (Tial QR) new location https://drive.google.com/file/d/1p7m...ew?usp=sharing Adding a filter https://drive.google.com/file/d/1p3Q...ew?usp=sharing Scuffy and redondoaveb like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] TIAL BOV NIB Blue	TBatt	Parts for sale (Private Classifieds)	4	06-23-2020 09:03 AM
[FOR SALE] Want to trade tial q50 for qrj	DUSHER	Parts for sale (Private Classifieds)	0	06-13-2020 09:09 PM
[FOR SALE] Topgunz air to air upgrade V1 with Tial upgrade	DUSHER	Parts for sale (Private Classifieds)	6	04-01-2020 03:36 PM
tial q bov source before or after tb	hindi1973	Forced Induction	10	04-24-2013 10:14 PM
Difference of 3.5L bottom end and 3.7L bottom end	98intrigue	Engine & Drivetrain	7	10-10-2011 08:51 AM

06-28-2020, 10:55 PM	#2 (permalink)
Jetsimple Base Member Join Date: Nov 2018 Location: NE Tennessee Posts: 51 Drives: 2010 370 Z Rep Power: 225	Can you explain how this quietens down the QRJ? Mine is really loud, and I’ve been trying to figure this out. Thanks

07-08-2020, 10:17 PM	#7 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29262	Bring it up!