TiAL BOV Bottom half (Quiet down Topgunz kit)

1dirtyz · 07-14-2020, 06:34 PM

Quote:

Originally Posted by NissanTracker

Hi,

Here is some vid/sound of the changes I did. I did end up relocating the BOV to the drivers side a bit where I have more room and clears my Nismo bumper better. It is MUCH MUCH quieter for sure, especially when driving. WOT gear changes have tamed down as well, but still loud enough so game can hear ;-)

The Stock setup (Tial Q front bumper)
https://drive.google.com/file/d/1p8V...ew?usp=sharing

Adding the recirc (Tial QR) new location
https://drive.google.com/file/d/1p7m...ew?usp=sharing

Adding a filter
https://drive.google.com/file/d/1p3Q...ew?usp=sharing

Your BOV is installed backwards. I just found this out today. Started losing boost under WOT because the BOV would stay open. Called Tial and they said its on backwards. Drove on it backwards for months lol. The side with the piston should be our outlet for air. Inlet would be where your filter is.

NissanTracker · 07-14-2020, 09:04 PM

Quote:

Originally Posted by 1dirtyz

Your BOV is installed backwards. I just found this out today. Started losing boost under WOT because the BOV would stay open. Called Tial and they said its on backwards. Drove on it backwards for months lol. The side with the piston should be our outlet for air. Inlet would be where your filter is.

I'm interested, explain....

the outlet of air is going out the recirc + filter... thats how the re-circ works

1dirtyz · 07-14-2020, 09:51 PM

Quote:

Originally Posted by NissanTracker

I'm interested, explain....

the outlet of air is going out the recirc + filter... thats how the re-circ works

They even said the instructions tell you to install it the way I described. I switched it around and now it's holding boost no issues at all. Shoot them an email of ya don't believe me

It can be installed the way you have it but it's recommend from them to install it the opposite way.

redondoaveb · 07-15-2020, 12:21 AM

Quote:

Originally Posted by 1dirtyz

They even said the instructions tell you to install it the way I described. I switched it around and now it's holding boost no issues at all. Shoot them an email of ya don't believe me

It can be installed the way you have it but it's recommend from them to install it the opposite way.

You must be talking about the qrj. The attached pic is how it needs to be installed.

1dirtyz · 07-15-2020, 07:16 AM

Quote:

Originally Posted by redondoaveb

You must be talking about the qrj. The attached pic is how it needs to be installed.

I'm talking about the QRJ

redondoaveb · 07-15-2020, 10:29 AM

Quote:

Originally Posted by 1dirtyz

I'm talking about the QRJ

The OP has a QR. Pic of the QR with a silencer.

1dirtyz · 07-15-2020, 11:27 AM

Quote:

Originally Posted by redondoaveb

The OP has a QR. Pic of the QR with a silencer.

Whoops! My bad looked like the QJR from the video

redondoaveb · 07-14-2020, 09:53 PM

Quote:

Originally Posted by 1dirtyz

Your BOV is installed backwards. I just found this out today. Started losing boost under WOT because the BOV would stay open. Called Tial and they said its on backwards. Drove on it backwards for months lol. The side with the piston should be our outlet for air. Inlet would be where your filter is.

Are you sure you're not thinking of the qrj? The qrj needs to be installed horizontal. The q and qr can only be installed one way.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] TIAL BOV NIB Blue	TBatt	Parts for sale (Private Classifieds)	4	06-23-2020 08:03 AM
[FOR SALE] Want to trade tial q50 for qrj	DUSHER	Parts for sale (Private Classifieds)	0	06-13-2020 08:09 PM
[FOR SALE] Topgunz air to air upgrade V1 with Tial upgrade	DUSHER	Parts for sale (Private Classifieds)	6	04-01-2020 02:36 PM
tial q bov source before or after tb	hindi1973	Forced Induction	10	04-24-2013 09:14 PM
Difference of 3.5L bottom end and 3.7L bottom end	98intrigue	Engine & Drivetrain	7	10-10-2011 07:51 AM