One-off Titanium Charge Pipes

m3chhawk · 04-18-2018, 01:33 PM

Last summer, a good friend and I embarked on project to play with titanium and see what was possible. I'm now looking to pass these on to someone that will appreciate them more than I do as my car sits 98% of the time.

These were hand-built using pie cuts and MAF flanges from TiCon. They are full length (2 pieces per side) and mate up perfectly to my Treadstone dual outlet intercooler. The driver's side has a bung machined and welded in for vacuum lines. I have run 12 pounds of boost through these without a single leak or slipped coupler.

There is $1,000+ in raw titanium and countless hours wrapped up in these. The couplers and clamps would not be included, but I could point you in the right direction to replicate my setup if desired. I'm assuming they could also be used as CAI's, but I can't make any promises or recommendations.

Price: $1,800 shipped

mag_black · 04-18-2018, 01:53 PM

Very nice. How come you didn't decide to put a burn on them? I think that would look cool.

04-18-2018, 01:33 PM	#1 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 25	One-off Titanium Charge Pipes Last summer, a good friend and I embarked on project to play with titanium and see what was possible. I'm now looking to pass these on to someone that will appreciate them more than I do as my car sits 98% of the time. These were hand-built using pie cuts and MAF flanges from TiCon. They are full length (2 pieces per side) and mate up perfectly to my Treadstone dual outlet intercooler. The driver's side has a bung machined and welded in for vacuum lines. I have run 12 pounds of boost through these without a single leak or slipped coupler. There is $1,000+ in raw titanium and countless hours wrapped up in these. The couplers and clamps would not be included, but I could point you in the right direction to replicate my setup if desired. I'm assuming they could also be used as CAI's, but I can't make any promises or recommendations. Price: $1,800 shipped __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo Last edited by m3chhawk; 04-19-2018 at 11:30 AM.

04-18-2018, 01:53 PM	#2 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	Very nice. How come you didn't decide to put a burn on them? I think that would look cool. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM-TT: Modify the intake charge pipes?	DIGItonium	Forced Induction	7	03-25-2016 10:05 AM
Carbon fiber charge pipes	BBRSpeedWorks	Forced Induction	19	11-10-2014 12:15 AM
3" Charge Pipes Contacting Tower Brace	pokeyl	Forced Induction	9	11-05-2013 11:35 PM
[FOR SALE] Motordyne ART Pipes Titanium Ceramic	oro	Parts for sale (Private Classifieds)	18	04-05-2013 06:37 PM
[FOR SALE] ART Resonance Test Pipes V2 Titanium Ceramic	kool_yaar	Parts for sale (Private Classifieds)	10	08-29-2011 07:01 PM