(2011 370Z) Part Out

370z1

I have been a member on this forum since 2010 and hope you can see from my posts over the last 7 years that I am trustworthy, honest and won't play games. Lets keep it simple and please, please only post if you are a serious buyer. I invite you to COME TO MY HOUSE to view ANY item so you can inspect prior to purchase. PM me and I will reply with my address and phone.

I am unable to ship most items because of either their size or their weight.

Prices are already at their lowe st.

Here are the items I CAN ship to lower 48. ALL OTHER ITEMS ARE PICK UP ONLY FROM ZIP 92084.
1. SOLD---Seat Covers,add $45 to ship---SOLD
2. SOLD---Spacers, add $75 to ship---SOLD
3. Alternator, add $75 to ship
4. Valentine One V1 Radar Detector, add $25 to ship

I accept Cash, Personal Check, Money Order or PayPay. I will PM you my PayPal account name/email for you to deliver funds when I meet you or if you buy any item prior to pick up to take it off market.

If you want to speak with me just PM me and I will reply with my phone number and or home address.

This thread is of my (2011 Nissan 370Z) Part Out. All my factory body parts have color code KAD and came off of my 2011 370Z. All parts have less then 1,000 miles and some much much less. Tires have less then 50 miles on them, Nissan Rotors also have less then 300 miles on them, car itself only has 15,000 miles on it as of July 26th 2017.

NOTE: ALL items below were installed on my 2011 370Z at one point so there are NO fitment issues what so ever. All body parts fit because they are from factory and came off the car after it was purchased. ALL non-Nissan parts fit PERFECTLY as I tested on my car. There are absolutely NO problems with any of these items fitting a 2011 370Z and ALL other Z's that share the same fitments. If your car is not the same year I can't say 100 percent for certain if it will fit but I know with a little searching we will find the answer. If we can't find the answer post the question here and the community usually will chime in to help. The people on this forum are some of the best and are very helpful.

It is very possible I left some important detail out but I will be sure to post it if you ask me and I know the answer.

FOR SALE:
************************************************** *****************************************
A) (1) 370Z Factory Front Bumper $199 (less then 500 miles)
B) (2) Hankook Tires Ventus V12 265/30/19 ($275 for pair) (Less then 50 miles on them, they are as close to NEW as you can get)
(THESE HANKOOK TIRES FIT THE ("MRR GT-1") (19 inch) CHROME WHEELS LISTED BELOW IF YOU WANT TO BUY THEM "TOGETHER" AS A SET ie: (2 Tires & 2 Wheels) I WILL TAKE OFF A $150 BUCKS OFF THE TOTAL.
C) (2) Factory Front Fenders $400 (less then 1,000 miles)
D) (1) Factory Hood $175
E) (4) MRR GT5 Staggered wheels (2) 19x8.5 / (2) 19x9.5 $750 (Fits 370Z big brakes) (less then 3,000 miles)
F) (2) MRR GT1 Chrome wheels 19x9.5 $550 (Fits 370Z big brakes) (less then 50 miles)
G) (1) Stillen Stainless Polished Muffler (MUFFLER ONLY) (like Chrome) $299 (From their CAT Back $1,500 setup) Your exhaust shop will need an hour to make it fit the factory pipes.
H) (2) Factory Front and (2) Factory Rear Rotors (Rotors only no calipers) (less then 300 miles on them) ($250 for all 4) from Z Sports package. Large Front Rotors for Big Brakes!!!!
I) SOLD --(2) 20mm H&R Hubcentric Spacers $75--SOLD
J) SOLD--(2) Custom Clazzio Seat Covers (Driver and Passenger fit like a glove) Black and Red Perforated Leather ($200 for pair) (check their website for the price I paid "clazzio.com"---SOLD
K) (1) Custom 270 AMP Alternator (NEW NEVER USED) Drop in, Bolt On, NO modification required, picture of website of where I purchased it is below. I paid ($700) for it after tax and shipping. My selling price is ($525) for pick up or ($600 shipped to lower 48). The 2011 Factory Alternator is 150 Amps which wasn't enough for all the extra stereo stuff, mainly the two sub amps but only when playing loud so I will let you have it for cheaper, it hasn't come out of its box, still 100% NEW. I believe it also comes with extra battery cables for easy connection.
L) (1) Valentine One V1 Radar Detector Serial Number 1176210620 with one major firmware update done early 2016. I paid $500 for it after all the extra accessories. Sale price with accessories in its original box is ($285 for pickup) or ($299 shipped to lower 48)
************************************************** *****************************************

SOLD - (2) Side Skirts (SOLD)
SOLD - (1) Stillen Gen 3 Long Tube Cold Air Intake (SOLD)
SOLD - (2) Clazzio Seat Covers (SOLD)
SOLD - (2) 20mm H&R Spacers (SOLD)
SOLD - (1) Red JDM Tow Hook (SOLD)






























































Picture of the White 370Z is NOT mine, it is from Stillen's Website but this IS what the muffler looks like after installed on the Z.


These Custom Clazzio Seat Covers from Clazzio Seat Covers - #1 Trusted Site - Customizable Leather Seat Covers ran me over $500 and I waited 3 months to get them. I only used them a couple of months so they are still in NEW condition.

************************************************** ************************************************** ****
********These covers Fit 370Z models between 2009 to 2017 and the Clazzio Seat Product Model Number is (4005)***********
************************************************** ************************************************** ****

If you visit their website and build the covers yourself just select the 3 pulldown menu options, it will show you the model number (4005) SELECT Perforated Leather for the colored Insert, Base cost and lead time of (3 months) and shipping cost if they charge for it, they did when I purchased them.

It does NOT matter if your seats are powered or if they are manual or what model Z you have, Clazzio only makes one statement that they suggest that the covers be put on CLOTH seats compared to the 370Z if equipped with factory leather because getting them on is a very tight fit. If you do have factory leather you are gonna need isopropyl or some type of evaporating liquid that will assist in the covers going over the factory leather, but cloth seats are much easier of an installation. Please note that my asking price of $200 + $45 to ship is a discount of $300 dollars based on their pricing at the time and how they were configured when I bought them.
Instead of playing games I simply posted the very lowest price I was willing to accept, lower prices will not be considered. Thank You

















*****PLEASE READ ME*******
__________________________________________________ __________________________________________________ _________________
I will be uploading pictures of the Rotors, and the Alternator over the next few days. Thank you for your patients.
__________________________________________________ __________________________________________________ __________________

370z1

NOTE: Pictures are inserted into post so you need to be (Signed In / Logged In) to see them. They are not attachments. All pictures in post are also visible in my photo albums.


Some Pictures of my 2011 370Z as of 07/28/2017

370z1

Hello All,
Just letting you know I reduced the prices on the Tires, the MRR GT-1 Wheels and on the 270 Amp Alternator. The Alternator is built specifically for the 370Z based on the Engine Code used in the 2011 370Z and all similar models. See their website to learn more. Picture is inserted into beginning 1st post.

I also added the offer that if someone buys both the Hankook Tires (19in) AND the MRR GT-1 chrome wheels (19in x 9.5in wide) (Together as a SET) I will take off an additional $150 from their total.

If you can find any of the posted items for cheaper please let me know. Items must be in same condition, ie: Great to New

Best Regards,
James (aka: 370Z1)

370z1

Bump

Lvcky69

170 for the seat covers

NguyenZ

Pm sent

370z1

Thank You NguyenZ,
I replied to your PM and if the other user doesn't reply by tomorrow I will let you have the item you asked about. I will PM you tomorrow and let you know.

Best Regards,
370Z1

370z1

------SOLD------SOLD------SOLD-----

Here are the H&R 20mm Hubcentric Spacers I promised pictures of. I need to wipe them clean, they have some surface moisture rust on them so after I get them cleaned off I will post another cleaned up picture. I need to locate the long Lug Bolts that came with them, I know they are in my garage somewhere but I thought they were in the box so I gotta find them. I should have them located them by tomorrow. If memory serves correctly, I believe I paid $130 for these and am selling for $75 total, ie: shipped to lower 48. I will also take a picture of the bolts after I locate them.

370z1

----------SOLD----------SOLD----------SOLD----------SOLD----------
Clazzio Seat Covers have been SOLD. "THANK YOU" all for your PM's and THANK YOU to the new owner for your purchase. Tracking number for shipment will be sent via PM (Private Message) and via (Text Message) to new owner tomorrow 08/02/2017 after they ship via US Postal Service.
----------SOLD----------SOLD----------SOLD----------SOLD----------

dedoom

Where in California are you located? And what brand of extended lugs do the spacers come with?

nandosman

When did you buy your Valentine One? I'm interested but the price is currently a bit steep for me; I'll subscribe in case you decrease the price later.

370z1

----------SOLD----------SOLD----------SOLD----------SOLD----------
Hey Guys,
The H&R Spacers have been SOLD. THANK YOU all for your PM's. PM and TEXT sent to buyer acknowledging that Payment was received via PayPal today 08/01/2017. I will send PM (Private Message) and Text Message to the new owner after they ship tomorrow 08/02/2017.


To the NEW owner:
"THANK YOU" for your purchase, I know you will enjoy these, they give the Z a wider stance and an aggressive look (IMHO). I have the same set myself in the rears and I love them plus the pushed out wheels (to me) make it look more natural even with the fenders. You don't have to worry about mounting them, they are very easy but just plan on taking 2 hours, getting the shorter bolt out is where the time gets spent, a hammer and patients. after to get the bolts replaced the HUBCENTRIC spacer fits perfectly onto the hub and as you slowly tighten down the lug nuts in a "X" pattern the hubcentric spacers are formed ie: tapered so it will seat perfectly so you can't screw it up, meaning the spacer will be evenly spaced around the hub and the lug bolt and their holes will have equal space around them so the lug nuts won't become squeezed. I have had my 20mm H&R spacers on the rear's now for over 6 years and I have never had any issues. Only one thing worth mentioning, some tire/wheel places like the National Chain Stores (you know the ones) will NOT work on my Wheels or Tires (if they are on the car) because their company policy says that wheel spacers are a liability. So I just use local smaller shops or take the wheels off put in truck and take them to them which happens more then I prefer because some shops have trouble lifting my car because it is too low. Even their low profile floor jack which I believe is only 1.5 inches doesn't fit, so you know the tricks, drive up onto a 2x4 then get the floor jack under, yada, yada, yada...They can't get it onto the ramps without damaging it but the smaller shops are always willing to find a solution, anyway that has been my experience, just an FYI.

JUST REMEMBER TO TORQUE THE LUG BOLT TO SPECIFICATION AND REMEMBER TO CHECK THEM A COUPLE TIMES THE FIRST TWO WEEKS AFTER INSTALATION. YOU WON'T NEED TO DO THIS FOREVER MEANING EVERYTIME THE WHEELS GET WORKED ON, IT IS MORE IMPORTANT YOU DO THIS ON THE FIRST INSTALL AND THE NEXT TIME THE WHEELS COME OFF BECAUSE IT LETS THEM SETTLE INTO PLACE. FOR EXAMPLE NOW IF MY WHEELS COME OFF I DON'T BOTHER CHECKING THE TORQUE SEVERAL TIMES IN THE FOLLOWING 2-5 DAYS BECAUSE THEY HOLD THEIR TIGHTNESS "BUT" IN THE BEGINING THEY DID LOOSEN BY A SMALL AMOUNT AND IF THEY HAD GON UNCHECJED I COULD HAVE LOST A LUG NUT. AND BY LOOSE I MEAN A HALF TO A FULL TURN BY DAY 3. BECAREFUL NOT TO OVER TOURQUE, THE H&R REPLACEMENT LUG BOLTS ARE MADE OF A LIGHTER ALLOY PROBABLY MOSTLY ALUMINUM SO THE THREADS CAN BE STRIPP (IF) OVER TIGHTENED TOO MUCH. FIND OUT THE PROPER TORQUE VALUES (SORRY) I CAN'T RECALL THE EXACT FOOT POUNDS BUT I BELIEVE H&R LISTS THE TORQUE VALUE ON THEIR WEBSITE SOME PLACE, BECAUSE I REMEMBER LOOKING FOR IT YEARS BACK. I BELIEVE THE TORQUE VALUES CHANGE A LITTLE BETWEEN SPACER MODELS IE: 10MM, 15MM, 20MM ALL THE WAY TO 25MM. BE SURE WHEN YOU PUT THE NEW LUG BOLTS IN YOU ALIGHN THEIR GROOVES TO THE GROOVES IN THE HUB HOLES, WHAT I DID WAS AFTER TAKING THE OLD LUG BOLT OUT THEN (BY HAND) GENTLY PUT THE NEW LUG BOLT INTO THE HOLE AS FAR AS IT WILL GO ADD A LITTLE PRESSURE AND BEGIN TO TWIST/TURN IT AND IT SHOULD CATCH VERY LITTLE AND IT WILL PREVENT YOU FROM BEING ABLE TO CONTINUE SPINNING THE BOLT. THEN GENTLY HAMMER IT THE START ITS PATH IMPACT THE HEAD HARD ENOUGH SO IT WON'T FALLOUT BY TSELF BUT IT ALSO CAN BE REMOVED IF NEEDED. IF ALL LOOKS GOOD FROM BOTH SIDES (FRONT AND BACK OF LUG BOLT) THEN WITH A STEADY HAND BEGIN TO DRIVE IT IN. MINE DID NOT GO IN EASY AND BECAUSE YOU DON'T HAVE MUCH ROOM IT WILL BE VERY DIFFICULT TO STRIKE THE HEAD OF THE LUG BOLT EVENLY (STRAIGHT ON) WHICH COULD CAUSE PROBLEMS. I PERSONALLY USED A 5 POUND SHORT HANDLE SLEDGE HAMMER BECAUSE OF THE LIMITED THROW. A HEAVY HAMMER HELPED ME SO MUCH MORE THEN A STANDARD HAMMER. THERE ARE OTHER WAYS THE DRIVE THESE BOLTS IN AND BEFORE YOU ATTEMPT TO DO IT I ADVISE YOU TO SEARCH THIS FORUM ON DIY SPACER INSTALLATIONS TO SEE HOW CREATIVE OTHER FOLKS GOT AND SEE WHAT METHODS THEY USED. I READ SOMEWHERE THAT SOMEONE USED A C-CLAMP TO PULL THE BOLTS INTO PLACE INSTEAD OF USING A HAMMER SO I AM SURE THERE ARE A FEW WAYS TO SKIN A CAT AND IF YOU FIND OUT WHAT HAS WORKED BEST FOR OTHERS MAY BE THE BEST WAY TO TRY YOURSELF. ADDING SOME GREASE TO THE LUG BOLTS WILL ALSO HELP GET THEM TO SLIDE IN BETTER, IE: MOTOR OIL, VASOLINE, WD-40, ANY LUBRICANT YOU HAVE AVAILABLE TO YOU THAT DOES THE TRICK.

WHEN I DID MINE I REMOVED THE CALIPERS FROM THE ROTOR BUT I DID NOT DISCONECT THEM SO I DID NOT HAVE TO BLEED THE BRAKE LINES SO IF YOU DO IT THIS WAY GET SOME STRING, OR WIRE HANGERS OR WHATEVER TO SUSPEND THE CALIPER AS NOT TO STRESS THE BRAKE LINE AND WATCH THOSE SWINGS, IT IS VERY EASY TO HIT SOMETHING YOU ARE NOT INTENDING TO HIT. I LIKED THE 5 LB SLEDGE HAMMER BECAUSE IT HAS A LARGE FACE AND IT IS EASY TO STRIKE THE HEAD.


These spacers are designed for your car, the lug bolt they provide are compatible with the factory lug bolts and all the holes line up perfectly. don't let those chain tire shops scare you into thinking a wheel could snap off while you are driving down the road, I could not believe the stupid crap the guy was telling me about how the lug bolt won't be able to support the weight/pressure of the wheel being pushed out that far and all the other crap in hopes I would disregard my ambition of installing spacers so they could get my business but because their policy won't allow them to work on cars with spacers they lost my business of buying 4 wheels and 4 tires from them which was an easy $3,200 bucks lost which I am glad because I found the wheels I liked and the tires too for cheaper then what they were offering. They don't try to scare you because they are concerned for your safety, they try to convince you because they know if you do want to add spacers they will not be able to keep you as a customer because of their own ridiculous policies. Anyway IMHO that is... Always keeps your old factory lug bolts/nuts in case you need them and measure the distance of where you wheel/tire sits today and see where it will end up based on the distance of the spacer so you have an idea of where it will end up.

HOPE THIS IS HELPFUL

My rear wheels are made by "MRR", "GT-1", "20x10", and the Rear Tires are Hankook's V12's 305/35/20 and the car has been lowered by "0.9" inches in the Front and by "0.8" inches in the rear and there is no rubbing or any touching, no vibration or any issues. I hope you enjoy these as much as I do. I don't have spacers in the front because the wheels in the front are wide enough and are even with the fenders. Front wheels are MRR, GT-1 20x9.5 and Tires are 255/30/20.

Kind Regards,
370Z1
----------SOLD----------SOLD----------SOLD----------SOLD----------

370z1

Price of V1 Radar Detector REDUCED to $285 for pickup or ($299 shipped to lower 48) (that is the bottom Line price). No lower offers will be accepted.

Thank you for your PM's....

For ANY remaining items For Sale you can
Send PM's or text me at (619) 823-8508
My PayPal Account is JT711517@aol.com.

First one to make payment wins that item.

I ship SAME DAY or NEXT DAY at the latest and tracking numbers are sent to buyer within 24 hours of payment.

V1 Serial Number is 1176210620 with one firmware update around early 2016

MUST be signed in to SEE inserted Pictures (They are not attachments)

370z1

Hello Dedoom
I am located in Vista CA my zip is 92084. The spacers come with lugs provided by H&R which I found and provided to the BUYER. I have uploaded pictures of the lugs they come with. The H&R spacers have been SOLD. Thank you kindly for your interest...


Best Regards,
370Z1


General NOTE for anyone having trouble seeing images:

Some folks are saying they can't see the images so here are the 3 solutions I know to work 95% of the time.

1. To see images you must be signed into the forum. Images are NOT attachments they are inserted pictures.
2. If option 1 does not solve the issue try another browser. Many times the browser settings prevent content from getting through based on your security settings. I have verified I can see the images using Internet Explorer, Mozilla FireFox and Google Chrome from a PC at another location separate from my network I used to post so I know the pictures are being seen by most folks.
3. If you are trying to view from your phone or tablet try a PC and try multiple browsers. I have no control over this forums servers and that is where my pictures are being stored and hosted from.

Thanks again for your interests in the items I am selling. I had so much better results compared to Craigslist.

370z1

Bump