New GT Spec 4pt Rear interior Strut Bar Brace -

IPLG37 · 09-27-2016, 07:57 PM

Bump.... still available ATM.

fierro · 09-27-2016, 08:30 PM

would you say the difference in handling / bracing is noticeable?

Dante2009 · 09-27-2016, 09:53 PM

Looking at the pic you have to cut into the interior trip to fit right?

EastcoastZ · 09-27-2016, 10:55 PM

Quote:

Originally Posted by fierro

would you say the difference in handling / bracing is noticeable?

He never installed these but I can tell you my experience. After installing these whenever I would slide the back end out it become very predictable and easy to control. Cornering I would say it was definitely more stable. And yes you do have to trim the panels or run no panels in order to run these

Sent from my iPhone using Tapatalk

IPLG37 · 09-27-2016, 11:04 PM

Thanks Frank! U da man.!

Exactly what he said guys.!

IPLG37 · 09-27-2016, 11:07 PM

Yes- as shown in the GT spec advertisement, the plastic pieces
Must be cut / trimmed for adjustments and fitting.

You can see how they chose to do it, and you can
See how Frank chose to do his as he added in his pic.

There's no right or wrong way... but it's a matter of taste
In how neatly you do the job for sure.

Dante2009 · 09-28-2016, 12:13 AM

Ugh this looks so good �� But I'm doing my tune this week and that's where the money is going if you have it for the 15th I'll take it

IPLG37 · 09-28-2016, 01:13 AM

Thanks Dante- nothing solid ATM... so if I still have it ... it's yours bro.

EastcoastZ · 09-28-2016, 03:34 PM

I believe I may or may not still have my panels. They would just need to be cleaned up some if someone wanted to do it how I did if anyone is interested in buying them for cheap. Would just have to check and make sure I still have them

Sent from my iPhone using Tapatalk

IPLG37 · 09-28-2016, 06:16 PM

Wow guys that's an offer right there!
Lmk too brother- I just might keep!

I appreciate the generosity from you on this thread brother.!
Hope both you an Lex are doing good.!

EastcoastZ · 09-28-2016, 08:21 PM

Ok I'll take a look one of these nights. And not a problem. I know I have more info on these so gotta try helping when I can! And thanks we're doing great!

Sent from my iPhone using Tapatalk

IPLG37 · 09-28-2016, 11:11 PM

Thanks Brother-
Lmk if I can do anything to help you out
Anytime too my man.!
I'm Loving the comradery on this.

Glad to hear you two are doing well also.!

Wish everyone was the same my friend!
I owe you.

IPLG37 · 09-29-2016, 06:45 PM

Bump.....

IPLG37 · 09-30-2016, 05:04 PM

Friday bump.....

IPLG37 · 10-01-2016, 01:18 AM

Bump....

09-27-2016, 07:57 PM	#16 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Bump.... still available ATM. kennyz424 likes this. __________________

09-27-2016, 09:53 PM	#18 (permalink)
Dante2009 Base Member Join Date: Jan 2016 Location: Georgia Posts: 36 Drives: 09 Nissan 370Z Rep Power: 9	Looking at the pic you have to cut into the interior trip to fit right? IPLG37 likes this.

09-27-2016, 11:04 PM	#20 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Thanks Frank! U da man.! Exactly what he said guys.! kennyz424 likes this. __________________

09-27-2016, 11:07 PM	#21 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Yes- as shown in the GT spec advertisement, the plastic pieces Must be cut / trimmed for adjustments and fitting. You can see how they chose to do it, and you can See how Frank chose to do his as he added in his pic. There's no right or wrong way... but it's a matter of taste In how neatly you do the job for sure. kennyz424 likes this. __________________

09-28-2016, 12:13 AM	#22 (permalink)
Dante2009 Base Member Join Date: Jan 2016 Location: Georgia Posts: 36 Drives: 09 Nissan 370Z Rep Power: 9	Ugh this looks so good �� But I'm doing my tune this week and that's where the money is going if you have it for the 15th I'll take it IPLG37 likes this.

09-27-2016, 08:30 PM	#17 (permalink)
fierro Base Member Join Date: Nov 2015 Location: San Diego Posts: 57 Drives: 09 Nissan 370Z Rep Power: 10	would you say the difference in handling / bracing is noticeable?

09-28-2016, 01:13 AM	#23 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Thanks Dante- nothing solid ATM... so if I still have it ... it's yours bro. kennyz424 likes this. __________________

09-28-2016, 03:34 PM	#24 (permalink)
EastcoastZ Base Member Join Date: Jun 2013 Location: Hazlet Posts: 139 Drives: 2012 370z Purple M6 Rep Power: 12	I believe I may or may not still have my panels. They would just need to be cleaned up some if someone wanted to do it how I did if anyone is interested in buying them for cheap. Would just have to check and make sure I still have them Sent from my iPhone using Tapatalk IPLG37 and kennyz424 like this.

09-28-2016, 06:16 PM	#25 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Wow guys that's an offer right there! Lmk too brother- I just might keep! I appreciate the generosity from you on this thread brother.! Hope both you an Lex are doing good.! kennyz424 likes this. __________________

09-28-2016, 08:21 PM	#26 (permalink)
EastcoastZ Base Member Join Date: Jun 2013 Location: Hazlet Posts: 139 Drives: 2012 370z Purple M6 Rep Power: 12	Ok I'll take a look one of these nights. And not a problem. I know I have more info on these so gotta try helping when I can! And thanks we're doing great! Sent from my iPhone using Tapatalk IPLG37 and kennyz424 like this.

09-28-2016, 11:11 PM	#27 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Thanks Brother- Lmk if I can do anything to help you out Anytime too my man.! I'm Loving the comradery on this. Glad to hear you two are doing well also.! Wish everyone was the same my friend! I owe you. kennyz424 likes this. __________________ Last edited by IPLG37; 09-28-2016 at 11:31 PM.

09-29-2016, 06:45 PM	#28 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Bump..... kennyz424 likes this. __________________

09-30-2016, 05:04 PM	#29 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Friday bump..... kennyz424 likes this. __________________

10-01-2016, 01:18 AM	#30 (permalink)
IPLG37 A True Z Fanatic Join Date: Oct 2012 Location: Orlando, Fl. Posts: 2,145 Drives: Wife Crazy Rep Power: 476	Bump.... kennyz424 likes this. __________________ Last edited by IPLG37; 10-03-2016 at 04:17 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] GT Spec Rear 4-Point Strut Brace	bwalla12	Parts for sale (Private Classifieds)	10	03-24-2016 12:25 PM
DIY: GT Spec Rear Strut Cross Brace	TypeOne	DIY Section (Do-It-Yourself)	41	12-06-2015 11:38 PM
Gt spec rear strut cross brace	dainedazz	North East Region	2	12-25-2013 05:29 AM
Gt spec rear strut cross brace	dainedazz	Brakes & Suspension	12	12-19-2013 05:30 PM
Diy gt spec rear strut cross brace	dainedazz	DIY Section (Do-It-Yourself)	2	12-12-2013 01:56 PM