Enkei RFP1's Bronze 18x10.5 w/ Hoosier A7 295/30/18'
 

I have a set of Enkei RFP1's Bronze 18x10.5 +15 w/ Hoosier A7 295/30/18's for sale.

$1500 + Shipping

I ran these for half a season at the local level. (6 events) I have decided to get out of the racing business for a little while and figured someone else could put these to use. The wheels are still in great shape aside from some light surface wear when the calipers rubbed against them after initial install. This can be seen in the pictures. I still ran these the rest of the season with out any issue.

Currently located in AZ. Aside from race time these have been stored indoors. If you have any questions please let me know.

In case you were wondering, yes these fit over the sport calipers. We test fitted them on a 370 my friend has.

More pictures can be found at the link below.

ForSale

http://www.mlyons.net/uploads/3/5/4/...731_1_orig.jpg

Thanks,
-Michael

Offset?

Prob a +15

Chris

Offset is +15.

A buddy of mine just ran this same setup on a 370Z at the SCCA Solo National.

Caliper rub after install? Yet they fit over the sport calipers? Can you please clarify? is this because they were on a 350Z? If they were test fit on a 370Z, do you recall how much clearance there was to the caliper?

Also, why are the wheels silver in your portfolio but shown as bronze?

I am not trying to troll and am seriously interested, but need some clarifications. Thanks in advance-

+15 offset clears akebono calipers. GLWS! I can't justify buying a third set lol

I'll ask. As for the difference in colors. I had two sets. I ran 9.5F 10.5R on my street setup in Gunmetal and chose bronze for my race set up just to be different.

I believe the caliper rub was due to the after market kit on the 350z. I haven't heard of any issues with fitment on the 370z. When I hear back from my buddy, I'll post back here.

Thanks,
-Michael

Here is what he had to say.

http://www.mlyons.net/uploads/3/5/4/...frank_orig.jpg

Decided to reduce the price to move these. Now that the car is gone they are just taking up space and I'd like them gone.

Are all 4 18x10.5? If so I would like to work something out if possible

what kind of front camber specs required to run this set up in the front? if I recall.. the tires will stick out the fender by like an inch with -2.6 camber front and 285/35/18 tires

I don't think I have any pictures but I was running 2.7 degrees and it was hardly noticeable. I think an inch would be a big exaggeration. I ran 275s daily and they didn't stick out at all.

Maybe this helps. Picture shows 19x10.5, effective offset +5, 285/35/19. -3.5 degree camber. I'm very surprised it doesn't look to be poking out much (if at all).

http://www.the370z.com/wheels-tires/...ml#post3567010

Side note: nice car OP, pretty much the exact mods I am heading to myself.

Wish this were without tires (and cheaper therefore)...GLWS!

Do you have pictures of them on the Z?